« previous next »
Pages: [1]   Go Down

Author Topic: BIG OOOPS  (Read 2239 times)

0 Members and 1 Guest are viewing this topic.

Offline Zac02

  • Full Member
  • *
  • Posts: 7
BIG OOOPS
« on: March 09, 2013, 04:55:30 PM »
 :-[ So let me start off by saying I had no buisness taking anything apart. I have a 78 cb550k that I pulled the motor on so I could rebuild the bike. the engine has been sitting in the garage for about a month or so now and I just got the itch to start turning nuts and bolts so I pulled the plate off the top of the top end and set it to the side, no big deal. For what ever reason I saw 4 10m nuts that I felt just need to come off...... soooo I spun the nut to the top of the thread pick up the socket AND plink plink plunk.... right down the hole! So I lost a nut right down the opening next to the chain. Now the question is how do I get tit out!!?
Logged
lets make it bad A$$!

Offline srbakker

  • Spam & Eggs
  • Hot Shot
  • ***
  • Posts: 550
Re: BIG OOOPS
« Reply #1 on: March 09, 2013, 04:59:33 PM »
Magnet?
Logged
1975 CB750 K5
2007 Triumph Tiger
2007 Triumph Speed Triple
1971 Kawasaki F7 175 Enduro
2000 Honda VFR800 (gone but not forgotten)

Offline Greggo

  • Somebody's
  • Old Timer
  • ******
  • Posts: 4,164
  • Helmets Save Lives. Period.
Re: BIG OOOPS
« Reply #2 on: March 09, 2013, 05:04:20 PM »
Go to pep boys, ace, home depot, or wherever and buy a telescopic magnet, a nice powerful one, and go fishing ;)
Logged

Offline Zac02

  • Full Member
  • *
  • Posts: 7
Re: BIG OOOPS
« Reply #3 on: March 09, 2013, 05:11:54 PM »
Maybe it was also the wrong move but I flipped the engine over and shook the piss out of it for a sec or so and nothing came out... I drained all the oil when I pulled it. Man I sure hope the magnet idea works. No better way to spend a rainy Sunday than fishing right?
Logged
lets make it bad A$$!

Offline buckett

  • Full Member
  • *
  • Posts: 89
Re: BIG OOOPS
« Reply #4 on: March 09, 2013, 07:01:06 PM »
haha this is like my worst nightmare ever time I have the cam cover off!  :P
Logged

Offline bjbuchanan

  • Master
  • *****
  • Posts: 2,276
Re: BIG OOOPS
« Reply #5 on: March 09, 2013, 09:21:51 PM »
Quote from: Zac02 on March 09, 2013, 05:11:54 PM
Maybe it was also the wrong move but I flipped the engine over and shook the piss out of it for a sec or so and nothing came out... I drained all the oil when I pulled it. Man I sure hope the magnet idea works. No better way to spend a rainy Sunday than fishing right?

I'm kinda big but that doesn't exactly sound like a cake walk, shaking the engine upside down. Just how disassemble is that thing lol
Logged
The dirty girl-1976 cb750k, Ebay 836, Tracy bodykit
Round top carbs w/ 38 pilots, middle needle position, airscrew 7/8ths out, 122 main jet
Stock airbox w/ drop in K&N, Hooker 4-1

Don't trust me alone with a claw hammer and some pliers

Offline Really?

  • I've come to the conclusion that I AM a
  • Really Old Timer ...
  • *******
  • Posts: 5,283
Re: BIG OOOPS
« Reply #6 on: March 09, 2013, 09:27:11 PM »
Quote
soooo I spun the nut AND plink plink plunk.... right down the hole! So I lost a nut right down the opening

Hah, nuff said!
Logged
I don't have a motorcycle, sold it ('85 Yamaha Venture Royale).  Haven't had a CB750 for over 40 years.

The Wife's Bike - 750K5
The Kid's Bike - 750K3

Offline Zac02

  • Full Member
  • *
  • Posts: 7
Re: BIG OOOPS
« Reply #7 on: March 09, 2013, 11:49:38 PM »
lol Im not a big guy but a little stronger than most its the full on engine minus the top plate. Im 5,9 about 205 so I can shake her pretty good.
Logged
lets make it bad A$$!

Offline Roach Carver

  • Really Old Timer ...
  • *******
  • Posts: 6,725
Re: BIG OOOPS
« Reply #8 on: March 10, 2013, 06:01:42 AM »
When it fell it may have fallen straight in. Now that you rolled it over it could be anywhere. If you get it up onto some kind of stand you might drop the pan.
Let us know how it goes.
Logged

Offline Zac02

  • Full Member
  • *
  • Posts: 7
Re: BIG OOOPS
« Reply #9 on: March 10, 2013, 11:02:19 AM »
Alright so I made a pretty nice redneck hoist out of a saw horse and an old ski rope I have. I've dropped the pan and just my luck no nut... I guess I could roll it around a little more maybe it ll fall down into the pan area. any thoughts so far guys? I still plan on getting a magnet and poking it around in there I was just hoping I could drop the pan and see it laying there but no such luck. Worst case scenario where could this thing be?

Thanks a ton to all out there
Logged
lets make it bad A$$!
Pages: [1]   Go Up
« previous next »