Author Topic: vintage hand tools  (Read 43699 times)

0 Members and 1 Guest are viewing this topic.

Offline Paul Lowe

  • Enthusiast
  • **
  • Posts: 174
  • If you like then it is good...
Re: vintage hand tools
« Reply #150 on: May 10, 2014, 04:23:04 AM »
It's cute but no room in shed for a wafer thin biscuit!

They must have made a range of these type drill accessories for balsa wood work.... :-)
My Honda sickness deepens

CB350F 1972
CB360G 1974
CB750 K1 1971
CT90 K0 1968
C102 1963
C50 1968
C70 1972
C90 1974
CL90 1968

1/2HP electric bike home made...

Offline dave500

  • Really Old Timer ...
  • *******
  • Posts: 17,026
  • WHAT?no gravy?
Re: vintage hand tools
« Reply #151 on: May 10, 2014, 04:26:16 AM »
yeah no worries paul,ill find a home for it,ill bet its a rare old thing?i have a sthill 038AV I use for balsa wood!nothing exceeds like excess?
« Last Edit: May 10, 2014, 04:28:28 AM by dave500 »

Offline Paul Lowe

  • Enthusiast
  • **
  • Posts: 174
  • If you like then it is good...
Re: vintage hand tools
« Reply #152 on: May 10, 2014, 04:50:05 AM »
Will dig up the other one maybe we can get them together.

Actually now I think of it it's more like a scroll saw type thing.

Will try and find it.
My Honda sickness deepens

CB350F 1972
CB360G 1974
CB750 K1 1971
CT90 K0 1968
C102 1963
C50 1968
C70 1972
C90 1974
CL90 1968

1/2HP electric bike home made...

Offline dave500

  • Really Old Timer ...
  • *******
  • Posts: 17,026
  • WHAT?no gravy?
Re: vintage hand tools
« Reply #153 on: May 10, 2014, 04:57:39 AM »
yeah post pics please?old tools,if they could talk?
« Last Edit: May 10, 2014, 05:02:12 AM by dave500 »

Offline FrankenFrankenstuff

  • Master
  • *****
  • Posts: 2,399
    • FrankenBike Stuff Store
Re: vintage hand tools
« Reply #154 on: May 10, 2014, 05:18:17 AM »
"We buy and sell junk"

Offline dave500

  • Really Old Timer ...
  • *******
  • Posts: 17,026
  • WHAT?no gravy?
Re: vintage hand tools
« Reply #155 on: May 10, 2014, 05:32:58 AM »
I got fifty for that old plane,i had cleaned it up though.

Offline Retro Rocket

  • Eggs are hard due too a
  • Really Old Timer ...
  • *******
  • Posts: 19,279
  • ROCK & ROLL
Re: vintage hand tools
« Reply #156 on: May 10, 2014, 04:54:38 PM »
I was given a vintage Britool socket set last week, I'll post a pic later... ;)
750 K2 1000cc
750 F1 970cc
750 Bitsa 900cc
If You can't fix it with a hammer, You've got an electrical problem.

Offline Terry in Australia

  • Really Old Timer ...
  • *******
  • Posts: 33,337
  • So, what do ya wanna talk about today?
Re: vintage hand tools
« Reply #157 on: May 11, 2014, 12:46:00 AM »
That saw was powered by a 1/4" electric drill Dave, my dad's got the complete kit at home, there's a circular saw, (that also bolts to a stand to use as a bench saw) and a sort of jigsaw (more like a scroll saw, but with a wider blade) and a little wood lathe, that came with the stand, which is a bench top deal. I think there was a pedestal drill attachment too?

My dad built our first house in 1951 and used that little gadget for a lot of the work. I think he's still got the drill that went with it, along with a heap of other tools that he bought new when he built the house, next time I'm down there I'll take some pics. ;D
I was feeling sorry for myself because I couldn't afford new bike boots, until I met a man with no legs.

So I said, "Hey mate, you haven't got any bike boots you don't need, do you?"

"Crazy is a very misunderstood term, it's a fine line that some of us can lean over and still keep our balance" (thanks RB550Four)

Offline dave500

  • Really Old Timer ...
  • *******
  • Posts: 17,026
  • WHAT?no gravy?
Re: vintage hand tools
« Reply #158 on: May 11, 2014, 01:09:32 AM »
wow good old aussie tools!its free to good home if anyone wants it!

Offline riverfever

  • Master
  • *****
  • Posts: 1,796
Re: vintage hand tools
« Reply #159 on: May 17, 2014, 09:42:56 PM »
I've enjoyed looking through these pics. I don't have family of my own that I know of but lost my father in-law 2 years ago (didn't know him long). He was an old cowboy that traveled the national rodeo circuit so we had 3 barns to go through and they were all full of snakes and stuff. My sister in-law just wanted to throw everything in all the barns and house away. We drove home right after he passed and rented a trailer to bring some stuff home because we got pissed with throwing old cool stuff away that he had used. We drove back the next summer only to find that someone had broken into the house and robbed us of all the fun of going through the rest of his belongings that we weren't able to get to on the previous trip. Everything was ransacked. In the main barn there was stuff just strewn about. We rented a dumpster and threw away so much stuff it was disgusting. I did bring some things home though (including hand tools). In the early 1920's his mother owned a bar down on 14th street in St. Louis. One barn had glasses from that bar in it along with some of the beer signs and tobacco goods. I use one of the tobacco boxes to hold recipes on my bench for flies that I tie. I brought this Falstaff sign home. It's a real shame...he liked to buy stuff but didn't take real good care of things so the barns were all dilapidated and most of what was in them was in bad shape.



I'll have to get some pics of the tools I brought back.
http://forums.sohc4.net/index.php?topic=127186.0

"You wouldn't think that out here...a man could simply run clear...out of country but oh my...oh my...nothing but the light." -Ben Nichols

Offline dave500

  • Really Old Timer ...
  • *******
  • Posts: 17,026
  • WHAT?no gravy?
Re: vintage hand tools
« Reply #160 on: May 17, 2014, 10:36:13 PM »
damn shame,bloody thieves,the pros read the death notices etc.

Offline mrbreeze

  • Not your average
  • Really Old Timer ...
  • *******
  • Posts: 5,902
  • Shut up when you're talkin' to me!!
Re: vintage hand tools
« Reply #161 on: June 01, 2014, 02:15:30 AM »
yeah get some pics up mrbreeze,we never know whats out there till we see it,great to see you suffered through the entire thread,you are now one of us!
Here ya go Dave. I haven't gone through my stuff yet but I did come across this little jewel the other day. I'm thinking there won't be too many people that will get this one so I'll give a hint. I don't know if UHaul is worldwide or not but I would imagine anyone in the US has heard of them. I worked for them as a mechanic briefly in the early 90's and this tool came from them. If nobody gets it in a few days I'll post the answer.
MEMBER # 257
Fool me once..shame on you. Fool me twice..I'm kickin' your a$$......

Offline grcamna2

  • Not a
  • Really Old Timer ...
  • *******
  • Posts: 15,207
  • I love to restore & travel. Keep'em Going Strong !
Re: vintage hand tools
« Reply #162 on: June 01, 2014, 03:02:12 AM »
I love this thread, subscribed.
75' CB400F/'bunch o' parts' & 81' CB125S modded to a 'CB200S'
  I love the small ones too !
Do your BEST...nobody can take that away from you.

Offline 333

  • Time for change
  • Really Old Timer ...
  • *******
  • Posts: 7,558
  • Mail List Member #162 - Call me Stan
Re: vintage hand tools
« Reply #163 on: June 01, 2014, 11:05:24 AM »
The pic isn't too clear, but I'd say it's some sort special tool for a security fastener.  I see what looks like a pin in that second pic.
Go metric, every inch of the way!

CB350F0  "Scrouching Tiger"
CT70K0    "Sneezing Poodle"

www.alexandriaseaport.org

Offline mrbreeze

  • Not your average
  • Really Old Timer ...
  • *******
  • Posts: 5,902
  • Shut up when you're talkin' to me!!
Re: vintage hand tools
« Reply #164 on: June 03, 2014, 01:24:26 AM »
OK ...I see nobody wants to guess except for 333. You are right in a sense....security. It is the key to open a cover deally that goes over the speedo cable connection at the transmission.It's to keep people from unscrewing the speedo cable and stealing milage on the rented truck. It's like a real thin walled socket that fits a bolt down in a recessed hole that holds the cover on the speedo cable connector. If a guy knew what he was doing he could still reach up under the dash under some of the older trucks and disconnect it at the head. I have no idea how they do it nowadays with electronic speedos but I'm sure they have something.
MEMBER # 257
Fool me once..shame on you. Fool me twice..I'm kickin' your a$$......

Offline 70CB750

  • Labor omnia vincit improbus.
  • Really Old Timer ...
  • *******
  • Posts: 14,806
  • Northern Virginia
Re: vintage hand tools
« Reply #165 on: June 03, 2014, 03:33:17 AM »
I am such a boy scout, I would not even guess people would try to steal miles from rental truck.

IMHO now it is done over GPS.
Prokop
_______________
Pure Gas - find ethanol free gas station near you

I love it when parts come together.

Dorothy - my CB750
CB750K3F - The Red
Sidecar


CB900C

2006 KLR650

Offline mrbreeze

  • Not your average
  • Really Old Timer ...
  • *******
  • Posts: 5,902
  • Shut up when you're talkin' to me!!
Re: vintage hand tools
« Reply #166 on: June 03, 2014, 09:33:59 PM »
Hell yeah!!! If you needed to rent a truck and drive it 500 miles you could disconnect the speedo at 20 miles and bag 480 free miles!! Last time I checked it was like 69 cents per mile. That would come out to $331.20.
MEMBER # 257
Fool me once..shame on you. Fool me twice..I'm kickin' your a$$......

Offline scottly

  • Global Moderator
  • Really Old Timer ...
  • *****
  • Posts: 16,312
  • Humboldt, AZ
Re: vintage hand tools
« Reply #167 on: June 03, 2014, 10:07:00 PM »
Some telephone wiring boxes used a similar thin-walled socket for security, referred to as a "pedestal key". (a pedestal is a foot or so square that sticks up about 3 feet off the ground.
I never would have guessed an anti-odometer tampering device?
On the subject of speedos, anyone heard of a "tattle-tale"? My dad told me these where fitted to the speedo cables of trucks to record maximum speeds and such. I have what I believe to be one of those units.
Don't fix it if it ain't broke!
Helmets save brains. Always wear one and ride like everyone is trying to kill you....

Offline mrbreeze

  • Not your average
  • Really Old Timer ...
  • *******
  • Posts: 5,902
  • Shut up when you're talkin' to me!!
Re: vintage hand tools
« Reply #168 on: June 03, 2014, 10:12:00 PM »
When I first started driving big rigs in the mid 70's the logging trucks I drove had them. Tach o graphs they were called.
MEMBER # 257
Fool me once..shame on you. Fool me twice..I'm kickin' your a$$......

Offline scottly

  • Global Moderator
  • Really Old Timer ...
  • *****
  • Posts: 16,312
  • Humboldt, AZ
Re: vintage hand tools
« Reply #169 on: June 03, 2014, 10:24:52 PM »
I'll get some pics...
Don't fix it if it ain't broke!
Helmets save brains. Always wear one and ride like everyone is trying to kill you....

Offline 70CB750

  • Labor omnia vincit improbus.
  • Really Old Timer ...
  • *******
  • Posts: 14,806
  • Northern Virginia
Re: vintage hand tools
« Reply #170 on: June 04, 2014, 03:22:43 AM »
I know truckers in Europe still use them.  Records, speed and brakes they take. 

The police have the right to inspect them and there is a way to cheat with a magnet.
Prokop
_______________
Pure Gas - find ethanol free gas station near you

I love it when parts come together.

Dorothy - my CB750
CB750K3F - The Red
Sidecar


CB900C

2006 KLR650

Offline strynboen

  • Old Timer
  • ******
  • Posts: 4,883
    • http://forums.sohc4.net/index.php?PHPSESSID=b5pd7bn1mpc99ke5v4ho16gb00&/topic,60973.0.html
Re: vintage hand tools
« Reply #171 on: June 04, 2014, 09:00:46 AM »
truck drivers from polen are marsters to manipulate them.... ???
i kan not speak english/but trying!!
http://forums.sohc4.net/index.php?topic=60973.0
http://forums.sohc4.net/index.php?topic=144758.0
i hate all this v-w.... vords

Offline mrbreeze

  • Not your average
  • Really Old Timer ...
  • *******
  • Posts: 5,902
  • Shut up when you're talkin' to me!!
Re: vintage hand tools
« Reply #172 on: June 04, 2014, 02:34:33 PM »
That looks more modern than I remember but the graph card looks the same.
MEMBER # 257
Fool me once..shame on you. Fool me twice..I'm kickin' your a$$......

Offline scottly

  • Global Moderator
  • Really Old Timer ...
  • *****
  • Posts: 16,312
  • Humboldt, AZ
Re: vintage hand tools
« Reply #173 on: June 04, 2014, 07:37:25 PM »
This version appears to have used a paper tape wound around a spindle like camera film??
 
Don't fix it if it ain't broke!
Helmets save brains. Always wear one and ride like everyone is trying to kill you....

Offline mrbreeze

  • Not your average
  • Really Old Timer ...
  • *******
  • Posts: 5,902
  • Shut up when you're talkin' to me!!
Re: vintage hand tools
« Reply #174 on: June 04, 2014, 09:04:09 PM »
Thats the one Scottly but I remember the round card. They probably had different versions of it . This was in 1976 up in Humboldt Co. California.
MEMBER # 257
Fool me once..shame on you. Fool me twice..I'm kickin' your a$$......