Author Topic: Mystery part needs identified  (Read 1422 times)

0 Members and 1 Guest are viewing this topic.

Offline justin_steube

  • Full Member
  • *
  • Posts: 14
Mystery part needs identified
« on: February 09, 2014, 09:03:50 am »


It may not really be a mystery part at all, but here's the deal:

The bike is a 77 cb550f

I was pulling off my right crankcase cover to get to the clutch and right as I pulled it off, this washer popped out along with the cover. Now I replaced all the clutch plates and started piecing it back together and cannot seem to find a home for this guy. I don't know if I missed something when putting the basket together or what. I can't seem to find this part on the schematics and parts diagrams I've looked at.

Any help would be much appreciated!


Sent from my iPhone using Tapatalk
« Last Edit: February 09, 2014, 09:14:31 am by justin_steube »

Wobbly

  • Guest
Re: Mystery part needs identified
« Reply #1 on: February 09, 2014, 09:12:57 am »
And what bike would that be?

Offline justin_steube

  • Full Member
  • *
  • Posts: 14
Re: Mystery part needs identified
« Reply #2 on: February 09, 2014, 09:13:35 am »
Sorry about that! It's a '77 cb 550f


Sent from my iPhone using Tapatalk

Offline LesterPiglet

  • Old Timer
  • ******
  • Posts: 4,046
  • 1977 CB550F2
Re: Mystery part needs identified
« Reply #3 on: February 09, 2014, 09:15:05 am »
What bike?
It looks like the locking washer for the clutch basket.
'Then' and 'than' are completely different words and have completely different meanings. Same with 'of' and 'have'. Set and sit. There, their and they're. Draw and drawer. Could care less/couldn't care less. Bought/brought FFS.


Les Ross.            Certified by a Professional

DH

  • Guest
Re: Mystery part needs identified
« Reply #4 on: February 09, 2014, 09:17:04 am »
That looks like a drain plug gasket made in China(?) That bike's parts all came from Japan. I don't know for sure what it is. but would think it doesn't belong in there. Anything else you serviced recently in the same work area? Could it have been on the floor already?
« Last Edit: February 09, 2014, 09:20:47 am by DH »

Offline justin_steube

  • Full Member
  • *
  • Posts: 14
Re: Mystery part needs identified
« Reply #5 on: February 09, 2014, 09:19:48 am »
It's a '77 cb 550. Have never opened up that engine casing before. Not sure if PO had ever done work in there. Didn't really look like it.

Yeah... Made in China...???


Sent from my iPhone using Tapatalk

DH

  • Guest
Re: Mystery part needs identified
« Reply #6 on: February 09, 2014, 09:24:47 am »
It's a '77 cb 550. Have never opened up that engine casing before. Not sure if PO had ever done work in there. Didn't really look like it.

Yeah... Made in China...???


Sent from my iPhone using Tapatalk


Sure it fell out of the engine, or was it already on the floor, from another vehicle?
Maybe got in there by accident when P.O. added oil? It looks like an aftermarket drain plug gasket form a car or truck, or a differential plug.
« Last Edit: February 09, 2014, 09:27:46 am by DH »

Offline Stev-o

  • Ain't no
  • Really Old Timer ...
  • *******
  • Posts: 34,143
  • Central Texas
Re: Mystery part needs identified
« Reply #7 on: February 09, 2014, 09:41:18 am »
That looks like a drain plug gasket made in China(?) That bike's parts all came from Japan.

+1......must be garbage
'74 "Big Bang" Honda 750K [836].....'76 Honda 550F.....K3 Park Racer!......and a Bomber!............plus plus plus.........

Offline justin_steube

  • Full Member
  • *
  • Posts: 14
Re: Mystery part needs identified
« Reply #8 on: February 09, 2014, 11:51:42 am »
Well, here's to hoping it was just something I just accidentally got mixed in with the other parts. Now that I think back, there was an actual metal washer that fell out from the kick start lever at the same time. Maybe I just assumed this little plastic guy came out with it.

Guess I'll just button her up and see if everything works okay! Thanks again, fellas.


Sent from my iPhone using Tapatalk

Offline LesterPiglet

  • Old Timer
  • ******
  • Posts: 4,046
  • 1977 CB550F2
Re: Mystery part needs identified
« Reply #9 on: February 09, 2014, 11:58:14 am »
Ooh, it's plastic. Damn phone. Too cold in my computer room.  ::)
'Then' and 'than' are completely different words and have completely different meanings. Same with 'of' and 'have'. Set and sit. There, their and they're. Draw and drawer. Could care less/couldn't care less. Bought/brought FFS.


Les Ross.            Certified by a Professional