« previous next »
Pages: [1]   Go Down

Author Topic: How to(with dyna s electronic ignition) adjust valve clearances please  (Read 545 times)

0 Members and 1 Guest are viewing this topic.

Offline millispartners08

  • cb750 four k1-k2 enthusiastic enthusiast
  • Full Member
  • *
  • Posts: 37
  • cb750 four K0/K1/K2 O.C.D
How to(with dyna s electronic ignition) adjust valve clearances please
« on: November 10, 2014, 01:23:10 PM »
Same as previously posted, this time please I need also step by step instructions to adjust valve clearances please-( have dyna s electronic ignition fitted as noted also before), please help me out. Thanks in advance.
Logged
"have much, and be confused; have little, and gain everything" chinese proverb.

Offline millispartners08

  • cb750 four k1-k2 enthusiastic enthusiast
  • Full Member
  • *
  • Posts: 37
  • cb750 four K0/K1/K2 O.C.D
Re: How to(with dyna s electronic ignition) adjust valve clearances please
« Reply #1 on: November 10, 2014, 01:48:40 PM »
Anyone care to enlighten me please where its best described?( if in shop manual what pages please). I have seen spot in supplement section for cam chain tensioner part but have trouble following/finding best spot in manual for step by step valve clearances adjusting correctly section. Please help me out.
Logged
"have much, and be confused; have little, and gain everything" chinese proverb.

Offline flybox1

  • My wife thinks I'm a
  • Really Old Timer ...
  • *******
  • Posts: 14,289
Re: How to(with dyna s electronic ignition) adjust valve clearances please
« Reply #2 on: November 10, 2014, 01:53:41 PM »
this is all in the shop manual
check pg 42/43 for valve adjustment steps
also on pg 181
Logged
'78 750K (F3 engine) PD42b's, Modified airbox w/K&N  filter, 40/110 jets, 1 needle shim, IMS@ 1 turn out. Kerker + Cone 18" QuietCore

Past Bikes
1974 550K0 (stock), 1973 CB350F (stock), 1983 Yamaha XS400K (POS)
77/78 cool 2 member #3
"Knowledge without mileage equals bullsh!t" - Henry Rollins

"This is my CB. There are many like it, but this one is mine…"

Offline millispartners08

  • cb750 four k1-k2 enthusiastic enthusiast
  • Full Member
  • *
  • Posts: 37
  • cb750 four K0/K1/K2 O.C.D
Re: How to(with dyna s electronic ignition) adjust valve clearances please
« Reply #3 on: November 10, 2014, 01:58:31 PM »
Thanks again mate. I am a mechanical novice- bare with me.
I'll check out p42/43 and 181 to try and follow valve clearances part. Thanks for pages heads up. It's a big manual for a novice, thanks again.
Logged
"have much, and be confused; have little, and gain everything" chinese proverb.
Pages: [1]   Go Up
« previous next »