Topic: Unknown cam - Data seen before?

[bear]

G'Day Brian, it's sitting in it's box in my collection of bits, you can have it mate, you can shout me into the Classic next year and buy me lunch, hows that sound? Cheers, Terry.

 Sounds like a deal to me Tez.

Cheers,
Brian

[Terry in Australia]

G'Day Brian, it's sitting in it's box in my collection of bits, you can have it mate, you can shout me into the Classic next year and buy me lunch, hows that sound? Cheers, Terry.

 Sounds like a deal to me Tez.

Cheers,
Brian

Woohoo! Free food!

[PeWe]

Help to identify cam.
I found an interesting cam on eBay I had to purchase. I have mounted it in the engine and it is hotter than it looked like.
It has no clear markings that say which manifacturer or model. (I hoped it was a more modest Andrews that it can't be)
#
#

Total lift IN/EX: 9,98 mm (.393")/9,22 mm (.363")

@ 1mm (0.04")lift,  0 lash
IN: 25/55    Dur: 260     LC: 105,00      
EX: 55,5/22 Dur: 257,5  LC:   106,75 
Overlap 47°

Yoshimura Daytona is not that different when reading the data. Lift is very close, open/close could be same cam too when the individual valve train will affect the timing.
http://www.satanicmechanic.org/yoshicam.shtml
@0.04"l ift
IN:  23/53   0.392" lift   Dur. 256
EX: 53/23   0.360" lift   Dur. 256

I look forward to time the cam and verify my numbers once again.