« previous next »
Pages: [1]   Go Down

Author Topic: 14mm Locking Washer ?  (Read 1061 times)

0 Members and 1 Guest are viewing this topic.

Offline rddcw

  • Hot Shot
  • ***
  • Posts: 359
14mm Locking Washer ?
« on: April 06, 2016, 08:44:51 AM »
Missing this 14mm Locking Washer behind the Plug or Nut on the end of the counter shaft that has the adjusting screw for the chain oiler. Is this locking washer needed or can I use something else? Part # for this Locking Washer is 90433-300-010.
« Last Edit: April 06, 2016, 08:46:48 AM by rddcw »
Logged

Offline rddcw

  • Hot Shot
  • ***
  • Posts: 359
Re: 14mm Locking Washer ?
« Reply #1 on: April 06, 2016, 08:51:02 AM »
Quote from: rddcw on April 06, 2016, 08:44:51 AM
Missing this 14mm Locking Washer behind the Plug or Nut on the end of the counter shaft that has the adjusting screw for the chain oiler. Is this locking washer needed or can I use something else? Part # for this Locking Washer is 90433-300-010.
« Last Edit: April 06, 2016, 08:54:48 AM by rddcw »
Logged

Offline evanphi

  • Apparently I'm an
  • Old Timer
  • ******
  • Posts: 3,107
  • Rhonda the Basket Case
Re: 14mm Locking Washer ?
« Reply #2 on: April 06, 2016, 09:13:13 AM »
Basic common sense is that a locking washer is there for a reason...
Logged
--Evan

1975 CB750K "Rhonda"
Delkevic Stainless 4-1 Header, Cone Engineering 18" Quiet Core Reverse Cone, K&N Filter in Drilled Airbox
K5 Crankcase/Frame, K4 Head and Cylinders, K1 Carbs (42;120;1 Turn)

She's a mix-matched (former) basket case, but she's mine.

CB750 Shop Manual (all years), searchable text PDF
Calculating the correct input circumference for digital speedometers connected to the original speedometer drive

Offline rddcw

  • Hot Shot
  • ***
  • Posts: 359
Re: 14mm Locking Washer ?
« Reply #3 on: April 06, 2016, 09:20:09 AM »
I should of said I realize that it's needed, but if I unable to find one what have you used instead? Was thinking about using Lock-Tite.
Logged

Offline Chachi

  • Hot Shot
  • ***
  • Posts: 713
Re: 14mm Locking Washer ?
« Reply #4 on: April 06, 2016, 09:48:27 AM »
There are some on eBay using your part #. Various prices. David Silver says discontinued.
Logged
73 CB750 K3
72 CB500 K1 - Sold
75 MR50 Elsinore K1

Offline rddcw

  • Hot Shot
  • ***
  • Posts: 359
Re: 14mm Locking Washer ?
« Reply #5 on: April 06, 2016, 09:55:13 AM »
Thanks Chichi,  Saw a few. Found one that's not badly priced with shipping expense. Was looking for as less expensive alternative but probably not the best to deviate from the factory washer.
Logged
Pages: [1]   Go Up
« previous next »