Topic: Custom made F2/3 pistons from chamber mold

[dragracer]

Does anyone have a picture of their custom made pistons from an F2/3 head chamber mold?? If so, can you please post the picture here along with specs on the piston - bore size and compression.

Thanks a bunch.

[slikwilli420]

I am newly interested in this as well. Not much in the way of high comp stock bore pistons. Maybe a 12.5:1 in 1mm overbore.

[rklystron]

Did something like that a few years ago on a CB750F2. Posted a quick video on what I did. This may help.

[bwaller]

slikwilli420, these Wiseco's are available in 62mm. Well check with them, not sure about for the F2/3

http://www.m3racing.com/graphics/parts/62mm_piston_kit.jpg

[slikwilli420]

Thanks Brent!

[dragracer]

Did something like that a few years ago on a CB750F2. Posted a quick video on what I did. This may help.

Can you tell us what compression ratio the finished pistons were advertised by Arias?

[rklystron]

If I recall correctly ARIS did not give a advertised CR. These where about 12:1.