Author Topic: Unidentified rear drum type hub 36 - hole type  (Read 844 times)

0 Members and 1 Guest are viewing this topic.

Offline AshimotoK0

  • Hot Shot
  • ***
  • Posts: 592
  • CB400/4, 69 CB750K0, '69 CB250SS, CB350K1 CB500K0
Unidentified rear drum type hub 36 - hole type
« on: December 18, 2016, 11:27:13 PM »
Amongst a load of CB450K0/CB72 stuff I bought recently was this hub. Everything the guy had was related to Hondas. But this hub is baffling me. I tried to identify the makers logo on the seal and I thought it might be NOK, which is a Japanese manufacturer (not sure though as the light was bad where it's stored). It's obviously from a large bike because the hub brake diameter is larger than the CB450K0 Bomber one I have and it is of a non-Honda like construction, in that the steel liner is riveted into the alloy drum? Any ideas? I can't even find a Brit bike hub on the Internet that looks remotely similar.  Some people have suggested Italian (Laverda, Ducati, Benelli etc ) but nothing I can find matches it  ..Cheers ... Ash
“Alright friends, you have seen the heavy groups, now you will see morning maniac music. Believe me, yeah. It’s a new dawn.”