Author Topic: Never seen a setup like this before  (Read 1269 times)

0 Members and 2 Guests are viewing this topic.

Offline Bankerdanny

  • Eventually I will be old enough in reality to be
  • Really Old Timer ...
  • *******
  • Posts: 7,626
  • Endeavor to persevere
"The problem with quotes on the Internet is that you never know if they're true" - Abraham Lincoln

Current: '76 CB750F. Previous:  '75 CB550F, 2007 Yamaha Vino 125 Scooter, '75 Harley FXE Superglide, '77 GL1000, '77 CB550k, '68 Suzuki K10 80, '68 Yamaha YR2, '69 BMW R69S, '71 Honda SL175, '02 Royal Enfield Bullet 500, '89 Yamaha FJ1200

Offline Stev-o

  • Ain't no
  • Really Old Timer ...
  • *******
  • Posts: 34,356
  • Central Texas
Re: Never seen a setup like this before
« Reply #1 on: June 13, 2019, 02:42:29 PM »
Neither have I and dont like the way it looks mounted on the bike.
'74 "Big Bang" Honda 750K [836].....'76 Honda 550F.....K3 Park Racer!......and a Bomber!............plus plus plus.........

Offline Bankerdanny

  • Eventually I will be old enough in reality to be
  • Really Old Timer ...
  • *******
  • Posts: 7,626
  • Endeavor to persevere
Re: Never seen a setup like this before
« Reply #2 on: June 13, 2019, 03:39:52 PM »
Neither have I and dont like the way it looks mounted on the bike.

It is very awkward. I suppose if the bike had a Rickman type fairing with the matching lower so the hoses were hidden it would be ok, but with an exposed engine it just looks messy.
"The problem with quotes on the Internet is that you never know if they're true" - Abraham Lincoln

Current: '76 CB750F. Previous:  '75 CB550F, 2007 Yamaha Vino 125 Scooter, '75 Harley FXE Superglide, '77 GL1000, '77 CB550k, '68 Suzuki K10 80, '68 Yamaha YR2, '69 BMW R69S, '71 Honda SL175, '02 Royal Enfield Bullet 500, '89 Yamaha FJ1200

Offline BenelliSEI

  • Really Old Timer ...
  • *******
  • Posts: 10,002
  • 1969 cb750
Re: Never seen a setup like this before
« Reply #3 on: June 13, 2019, 05:20:11 PM »
Any idea where the “return” line hooks in? Kind of odd to take oil from the main supply gallery.....

Offline slikwilli420

  • Master of Disaster
  • Master
  • *****
  • Posts: 2,362
Re: Never seen a setup like this before
« Reply #4 on: June 13, 2019, 05:22:57 PM »
Taking oil from the main gallery is insane. Quick way to smoke a set of main bearings. Looks like the return is the rear case vent. Worst Odessa I've seen in a while.
All you gotta do is do what you gotta do.

Vintage Speed Parts Mashup: http://forums.sohc4.net/index.php?topic=133638.0
Rickman CR Parts Kit Refresh: http://forums.sohc4.net/index.php/topic,154837.0.html
AHRMA CB750 Racer: http://forums.sohc4.net/index.php/topic,158461.0.html
AHRMA Superbike Heavyweight Racer: http://forums.sohc4.net/index.php/topic,173120.0.html
'76F CB750 Patina Redemption: http://forums.sohc4.net/index.php/topic,174871.0.html

Offline commander60

  • Full Member
  • *
  • Posts: 92
Re: Never seen a setup like this before
« Reply #5 on: June 15, 2019, 02:52:03 PM »
Ever see one of these ? I wonder how effective it is , its on my bike.

Offline Jerry Rxman Griffin aka MuthaF'er

  • This MuthaF'er is getting to be a
  • Really Old Timer ...
  • *******
  • Posts: 14,923
  • Bought her new 4/75
Re: Never seen a setup like this before
« Reply #6 on: June 15, 2019, 03:08:01 PM »
It can't really do anything. Replace it with an oil gauge which will probably cool the oil just as much.
As of today 3/13/2012 my original owner 75 CB750F has made it through 3 wives, er EX-wives. Free at last.  ;-)

Offline commander60

  • Full Member
  • *
  • Posts: 92
Re: Never seen a setup like this before
« Reply #7 on: June 15, 2019, 03:30:05 PM »
It sticks in there about 3 inches, it gets pretty warm.

Offline PeWe

  • Really Old Timer ...
  • *******
  • Posts: 15,603
  • Bike almost back to the 70's 2015
Re: Never seen a setup like this before
« Reply #8 on: June 16, 2019, 02:14:42 AM »
Oil pressure gauge a better thing to put in that hole.
CB750 K6-76  970cc (Earlier 1005cc JMR Billet block on the shelf waiting for a comeback)
CB750 K2-75 Parts assembled to a stock K2

Updates of the CB750 K6 -1976
http://forums.sohc4.net/index.php/topic,180468.msg2092136.html#msg2092136
The billet block build thread
http://forums.sohc4.net/index.php/topic,49438.msg1863571.html#msg1863571
CB750 K2 -1975  build thread
http://forums.sohc4.net/index.php/topic,168243.msg1948381.html#msg1948381
K2 engine build thread. For a complete CB750 -75
http://forums.sohc4.net/index.php/topic,180088.msg2088008.html#msg2088008
Carb jetting, a long story Mikuni TMR32
http://forums.sohc4.net/index.php/topic,179479.msg2104967.html#msg2104967

Offline Jerry Rxman Griffin aka MuthaF'er

  • This MuthaF'er is getting to be a
  • Really Old Timer ...
  • *******
  • Posts: 14,923
  • Bought her new 4/75
Re: Never seen a setup like this before
« Reply #9 on: June 16, 2019, 10:53:09 AM »
It sticks in there about 3 inches, it gets pretty warm.

My concern would be how disruptive to the oil flow would those 3" be. It's at best IMO a conversation piece.
As of today 3/13/2012 my original owner 75 CB750F has made it through 3 wives, er EX-wives. Free at last.  ;-)

Offline nicks2319

  • Enthusiast
  • **
  • Posts: 202
  • Youngstown, OH
Re: Never seen a setup like this before
« Reply #10 on: June 16, 2019, 12:37:26 PM »
Pretty cool though. Interesting design. But if I were going to try something like that i'd just fit a regular square shaped oil cooler from something else. Can't imagine that surface area does much of anything.

Offline Stev-o

  • Ain't no
  • Really Old Timer ...
  • *******
  • Posts: 34,356
  • Central Texas
Re: Never seen a setup like this before
« Reply #11 on: June 17, 2019, 08:34:55 AM »
Ever see one of these ?

Have not.  Someone had too much time...
'74 "Big Bang" Honda 750K [836].....'76 Honda 550F.....K3 Park Racer!......and a Bomber!............plus plus plus.........

Online Don R

  • My Sandcast is a
  • Really Old Timer ...
  • *******
  • Posts: 19,983
  • Saver of unloved motorcycles.
Re: Never seen a setup like this before
« Reply #12 on: June 17, 2019, 11:38:08 AM »
 It's like the trans coolers they sold for street rods, designed to hide in or behind the C frame.

 The commander's oil cooler is interesting, like the finned rocker cover caps. In theory they should work even if just a little.
No matter how many times you paint over a shadow, it's still there.
 CEO at the no kill motorcycle shop.
 You don't need a weatherman to know which way the wind blows.