Author Topic: Early Sandcast Found...... (Read 93325 times)

Terry in Australia · « **Reply #225 on:** March 19, 2021, 04:37:07 PM »

I think I've been lucky, I've met really nice people on Honda's, Kawasaki's, Yamaha's, Suzuki's, Triumph's, Harley's, BMW's, etc. I think that most bike guys are good people, I even know a couple of 1 percenters, and they're good guys too. I rarely see a "Road Rage" incident involving someone on a bike, although over the last 40 years or so, I have had cause to show some ignorant car drivers the error of their ways......

Don R · « **Reply #226 on:** March 19, 2021, 05:52:44 PM »

My brother owned a Benelli dealership once, he never sold enough small bikes to get any big bikes. Too bad, I would have bought a 6 if he could have gotten one.

BenelliSEI · « **Reply #227 on:** March 19, 2021, 07:59:13 PM »

Quote from: Don R on March 19, 2021, 05:52:44 PM

My brother owned a Benelli dealership once, he never sold enough small bikes to get any big bikes. Too bad, I would have bought a 6 if he could have gotten one.

I have to say I think it is one of the neatest motorcycles ever manufactured. Almost every part is a sculpture. Not very practical, but stunning to look at!

754 · « **Reply #228 on:** March 19, 2021, 08:30:31 PM »

You have to work at it a bit..
The more you put in.... the more you get out...
This post was in response to posts..223, 224...

grcamna2 · « **Reply #229 on:** March 19, 2021, 08:49:43 PM »

Quote from: BenelliSEI on March 19, 2021, 07:59:13 PM

Quote from: Don R on March 19, 2021, 05:52:44 PM
My brother owned a Benelli dealership once, he never sold enough small bikes to get any big bikes. Too bad, I would have bought a 6 if he could have gotten one.

I have to say I think it is one of the neatest motorcycles ever manufactured. Almost every part is a sculpture. Not very practical, but stunning to look at!

John,I hope you take the SEI out for a long weekend tour and really enjoy it soon.

BenelliSEI · « **Reply #230 on:** March 23, 2021, 08:09:36 PM »

Quote from: grcamna2 on March 19, 2021, 08:49:43 PM

Quote from: BenelliSEI on March 19, 2021, 07:59:13 PM
Quote from: Don R on March 19, 2021, 05:52:44 PM
My brother owned a Benelli dealership once, he never sold enough small bikes to get any big bikes. Too bad, I would have bought a 6 if he could have gotten one.

I have to say I think it is one of the neatest motorcycles ever manufactured. Almost every part is a sculpture. Not very practical, but stunning to look at!

Will do it soon!

John,I hope you take the SEI out for a long weekend tour and really enjoy it soon.

BenelliSEI · « **Reply #231 on:** March 23, 2021, 08:12:12 PM »

Repaired the two small holes in the frame today. Rear foot peg mounts, where the rack was welded on (look closely, it was ugly). Etch primer and frame paint are next.

PeWe · « **Reply #232 on:** March 24, 2021, 12:12:45 AM »

Not early stock Honda, that's for sure!

Restore the look, function and the given respect for that bike as an individual!

BenelliSEI · « **Reply #233 on:** March 24, 2021, 07:15:16 AM »

Quote from: PeWe on March 24, 2021, 12:12:45 AM

Not early stock Honda, that's for sure!
Restore the look, function and the given respect for that bike as an individual!

Per..... that’s the plan. Time will tell. I’ve got to finish the Rickman CR. I want to play a bit with my “new” chopper, and this bike! Not in any rush, want to get it right.

PeWe · « **Reply #234 on:** March 24, 2021, 08:19:10 AM »

John, you must be very curious about riding the chopper, right?

Correct tough gang clothing, open helmet and tatoos!!

britman · « **Reply #235 on:** March 24, 2021, 10:28:22 AM »

Here is another one if anybody is looking. A few cosmetic issues, should buff right out. I am still looking for another project but this is tad out of my price range.....

https://washingtondc.craigslist.org/mld/mcy/d/mount-airy-1969-honda-cb-750-sandcast/7294471280.html

grcamna2 · « **Reply #236 on:** March 24, 2021, 10:53:45 AM »

Quote from: britman on March 24, 2021, 10:28:22 AM

Here is another one if anybody is looking. A few cosmetic issues, should buff right out. I am still looking for another project but this is tad out of my price range.....

https://washingtondc.craigslist.org/mld/mcy/d/mount-airy-1969-honda-cb-750-sandcast/7294471280.html

12K

y2kc0wb0y · « **Reply #237 on:** March 24, 2021, 11:47:17 AM »

early oil filter, double cut fender, long chain guard, cloth oil lines...seems like there is a lot original stuff on this one. $12k worth?

Don R · « **Reply #238 on:** March 24, 2021, 12:29:47 PM »

I see a few incorrect parts, worst maybe being the head? Headlight ears, grab handle, side cover, I didn't see the chain area. For sure early enough to be worth something.

754 · « **Reply #239 on:** March 24, 2021, 02:43:02 PM »

Not seeing horn mount on the left.
WURST lOOking kicker i have seen in 45 years of looking at these..

grcamna2 · « **Reply #240 on:** March 24, 2021, 02:52:38 PM »

What's a fair price for something like that ?

Stev-o · « **Reply #241 on:** March 24, 2021, 02:57:38 PM »

Quote from: grcamna2 on March 24, 2021, 02:52:38 PM

What's a fair price for something like that ?

$1000! That bike is RUFF! Imagine how much it would take to make presentable?

$12K...that seller is fishing for a whale!

BenelliSEI · « **Reply #242 on:** March 24, 2021, 08:37:46 PM »

Quote from: Stev-o on March 24, 2021, 02:57:38 PM

Quote from: grcamna2 on March 24, 2021, 02:52:38 PM
What's a fair price for something like that ?

$1000! That bike is RUFF! Imagine how much it would take to make presentable?

$12K...that seller is fishing for a whale!

When I stumbled on this one, I quickly had a few legit offers that would really surprise you.....

Terry in Australia · « **Reply #243 on:** March 24, 2021, 09:24:06 PM »

Wow, a very early sandy, but 12K in that condition? That's a lotta dough for a pile like that, especially with a "stuck" engine...........

PeWe · « **Reply #244 on:** March 25, 2021, 12:14:11 AM »

Possible to restore it for $15000US in parts, paint, cylinder and head work? Everything else less than slaves gets since they get room, food and clothes. We bike restorers work for free!

I guess it can cost more.
Lotus Root pipes cost some when available. NOS HM300 double that!

If no rust at all, another thing.

Don R · « **Reply #245 on:** March 25, 2021, 07:42:32 AM »

I got a little excited buying parts this week for the late K0 and did some quick math. I'm still right side up but a total resto isn't happening.

Magpie · « **Reply #246 on:** March 25, 2021, 08:34:13 AM »

I'm doing a basket case K3 and starting o get nervous about the escalating cost. I can't imagine doing a full correct restoration on a sandcast. I have an early sandcast motor and 2 people have offered me in trade a high number sandcast bike. Some deep pockets out there. Cliff.

754 · « **Reply #247 on:** March 25, 2021, 08:47:18 AM »

I remember saying, dont let that one get away .....
They offered you whole bikes for it ? ..cool, great investment..

BenelliSEI · « **Reply #248 on:** March 25, 2021, 12:42:02 PM »

“It’s only money”!

Off to see the painter.......

RAFster122s · « **Reply #249 on:** March 25, 2021, 03:13:47 PM »

Painter being warned to not blast the welds smooth and fill them, right? Recall hearing someone crushed by results of blaster and painter prettying it up and as a result the fram no longer looked original after being painted.

News:

Author Topic: Early Sandcast Found...... (Read 93325 times)