Author Topic: Why She is Noisy and Hard to Push (Read 1287 times)

HondaMan · « **Reply #25 on:** February 13, 2021, 02:33:14 PM »

Quote from: seanbarney41 on February 12, 2021, 12:59:19 PM

I share shop space with ex-pro motorcycle mechanic. So I always try those plyers first...they have not worked yet. Clamp the mc in your vice and use two punches.

+1
No, +5...

754 · « **Reply #26 on:** February 13, 2021, 02:40:43 PM »

The Hazet seems to work good, only used it a few times... bought it new because I was tired of screwing around with those clips. DOWNSIDE Is the eBay set are like 62 bucks ... look around a bit...

chiefum · « **Reply #27 on:** February 13, 2021, 07:10:54 PM »

I used the Motion Pro 08-0279, it worked when I rebuilt my master cylinder. Quality could have been better, but it worked.

Sent from my SM-N950U using Tapatalk

Don R · « **Reply #28 on:** February 13, 2021, 07:39:29 PM »

As mentioned sometimes you need to sand the OD of the pad backer even on a new one.

SOHC/4 Owners Club Forums

News:

Author Topic: Why She is Noisy and Hard to Push (Read 1287 times)

HondaMan

Re: Why She is Noisy and Hard to Push

754

Re: Why She is Noisy and Hard to Push

chiefum

Re: Why She is Noisy and Hard to Push

Don R

Re: Why She is Noisy and Hard to Push