« previous next »
Pages: [1]   Go Down

Author Topic: Quick spoke question...  (Read 1203 times)

0 Members and 2 Guests are viewing this topic.

Offline SClay115

  • Enthusiast
  • **
  • Posts: 224
Quick spoke question...
« on: July 07, 2007, 01:42:37 PM »
I feel silly asking this, but can someone with a CB350 Twin, early style with the drums front and rear, maybe take a quick measure of how long the spokes are? I totally forgot to do this when I took apart my wheels, so now I've got a bunch of new spokes, and I'm not sure if they are front are rear. Can anybody help me out?

Steve
Logged

Offline mack808

  • Full Member
  • *
  • Posts: 37
Re: Quick spoke question...
« Reply #1 on: July 08, 2007, 02:37:24 PM »
Backs are longer by 3-4mm. the front hub is larger than the rear so spokes are shorter there.....  Hope that helps you.....  I have a CB350 I have been building up for vintage racing, so I had wheels here and micro fiche also...  Any other help you need let me know
Logged
CB350 twin vintage road racer, CB350F project, GS750es daily rider, NS400r play bike, 2 MB5s, Z50r project, CB500/590 vintage racer built for friend, CT200 project, and a Gina (Gilera copy made in Argentina)...  And ?????

Offline SClay115

  • Enthusiast
  • **
  • Posts: 224
Re: Quick spoke question...
« Reply #2 on: July 09, 2007, 05:36:58 PM »
Are there only two sizes? I really need a concrete answer for this, I have a set of spokes I purchased, and there are three lengths, I really need to know if I should start looking again for spokes...

Steve
Logged

Offline CBGBs

  • Hot Shot
  • ***
  • Posts: 372
    • Ride or Rot vintage motorcycle event in FTW
Re: Quick spoke question...
« Reply #3 on: July 09, 2007, 06:33:09 PM »
Hey ,while we're at it...... Do the disk brake wheels only use B spokes and no A spokes?
Logged
'66 CB77 Superhawk  '73 CB350G Cafe  '75 CB400F '65 S90  '78 CB750 SS

Offline Jugghead

  • I just THINK I'm a
  • Hot Shot
  • ***
  • Posts: 302
  • 350cc of pure FUN
Re: Quick spoke question...
« Reply #4 on: July 09, 2007, 08:14:20 PM »
Quote from: CBGBs on July 09, 2007, 06:33:09 PM
Hey ,while we're at it...... Do the disk brake wheels only use B spokes and no A spokes?
Not quite, As I understand it.  You need 20 A and 20 B spokes. some spokes are woven "outside in" and "inside out"
look in the FAQ, there is an amazing tutorial in there about how to relace the rims, and why you need both spokes.
Logged
9/72 CB350F...15k miles and rising
Pages: [1]   Go Up
« previous next »