« previous next »
Pages: [1]   Go Down

Author Topic: Stock clutch cable length  (Read 1293 times)

0 Members and 2 Guests are viewing this topic.

Offline ekim98

  • Expert
  • ****
  • Posts: 788
Stock clutch cable length
« on: August 22, 2007, 07:27:17 PM »
 I've got a 78 750k and I put drag bars on. The clutch cable is to long. The bars I took off I  don't think were stock so I think the cable is not stock. Does anyone have a stock clutch cable they could measure the outside housing on, so I know if I need a stock or shorter cable?
I did a search and couldn't find any stock cable lengths. Thanks.
Logged
Patriot Guard Rider - KY. Ride with Respect

78 750k  cafe bike sort of
67 305  Superhawk (working project)

Offline Sam Green Racing

  • Really Old Timer ...
  • *******
  • Posts: 16,069
  • I REALLY? hate black rims.
Re: Stock clutch cable length
« Reply #1 on: August 22, 2007, 08:03:22 PM »
We had the same problem with the CR (it has clipons) We ended up useing a UK spec F1 cable from DSS.

The UK F1 had the lower type bars and the cable from that model did the job for us.

Sam. ;)
Logged
C95 sprint bike.
CB95 hybrid race bike
CB95 race bike
CB92
RS 175. sprint/land speed bike
JMR Racing CB750A street ET drag bike

Offline boatsdickson

  • Hot Shot
  • ***
  • Posts: 673
  • 1978 836 K8
Re: Stock clutch cable length
« Reply #2 on: August 22, 2007, 08:24:00 PM »
ekim, End to end of housing only is 47 3/4 inches
        "             " of cable is 53... 8)
Logged
"No. We're all our own prisons, we are each all our own wardens and we do our own time. I can't judge anyone else. What other people do is not really my affair unless they approach me with it. Prison's in your mind. Can't you see I'm free"?  Testimonial of Charles Manson

Offline mkramer1121

  • Expert
  • ****
  • Posts: 1,304
Re: Stock clutch cable length
« Reply #3 on: August 22, 2007, 08:27:53 PM »
Also, Motion Pro sells a -3 inch clutch cable for our bikes.
Logged

Offline ekim98

  • Expert
  • ****
  • Posts: 788
Re: Stock clutch cable length
« Reply #4 on: August 22, 2007, 09:37:29 PM »
Thanks all for the quick reply. I'll measure my cable and see what size I should order. Just eye balling it I need one about 4" shorter.

 Bad eye balling by me, the cable on there now is 7-3/4" longer than what "boatsdickson" said a stock cable is. I knew there was way to much cable hanging out there but not that much! Guess I'll get about 1" under stock.
« Last Edit: August 23, 2007, 11:19:48 AM by ekim98 »
Logged
Patriot Guard Rider - KY. Ride with Respect

78 750k  cafe bike sort of
67 305  Superhawk (working project)
Pages: [1]   Go Up
« previous next »