Author Topic: 79' KZ750 .... "Gutter Brat"  (Read 105353 times)

0 Members and 2 Guests are viewing this topic.

Offline Spikeybike

  • when planting C4 at your enemy's base make sure you don't use a
  • Really Old Timer ...
  • *******
  • Posts: 7,265
  • member #1150
Re: 79' KZ750 CAFE "INSPIRED" TWIN .... "Rusty Nuts"
« Reply #175 on: August 21, 2010, 09:47:27 AM »
so i have recently become a big fan of Southern Wisconsin side roads ,  and a buddy pionted out that i'm gonna not like all the crap hittin me in the face , ....so long story short .. i made a fender ... not gonna use it all the time cuz i think it looks better fenderless





.....totally forgot to snap a pic of the whole bike with the fender on it  ::)


Offline Spikeybike

  • when planting C4 at your enemy's base make sure you don't use a
  • Really Old Timer ...
  • *******
  • Posts: 7,265
  • member #1150

Offline Zaipai

  • I am getting closer to being an
  • Old Timer
  • ******
  • Posts: 3,400
    • My Home page
Re: 79' KZ750 CAFE "INSPIRED" TWIN .... "Rusty Nuts"
« Reply #177 on: August 21, 2010, 04:26:16 PM »
I think it looks good with the fender on, however it does loose the theme you are going for I think. Nice work on the Snuff-or-Not I also never heard of them until now also.

.: Scott :.
Its my Avatar..

75 CB550F  | 


Offline greasy j

  • lanesplitting
  • Expert
  • ****
  • Posts: 853
  • non serviam
    • Dimale Painting & Restoration
Re: 79' KZ750 CAFE "INSPIRED" TWIN .... "Rusty Nuts"
« Reply #178 on: August 23, 2010, 02:58:05 PM »
I could hear 'how could hell be any worse' in the background on the video you made showing the exhaust turn-outs. my fave bad religion album. they got really bland after that, too cleaned up sounding. but 'suffer' has the best lyrics. great writing.

at the end it was 'rumble in brighton', huh? I have a rolling stone magazine cover from the 80's I saved w/ the stray cats on it. but it's kinda trashed on the wall of my garage. says- 'stray cats in heat' and they're all super close together, like about to make out.

you know slim jim phantom, the drummer, was the slim jim guy on the commercials? at least that's what I heard.

oh, yeah. the bike looks KILLER! I love the rear end. some spots look a tiny bit lumpy on that rear fender. might just be the pic, though. you have any laquer putty, the red stuff that comes in a tube? some people call it glazing putty. I use that stuff to smooth out minor lumpiness. it sands super easy and you can put it on with a razor blade for pinholes and stuff. and you don't need to bother with a hardener. plus it gets you higher than glue, open a window to come down.

not to be critical. I really like this one. it's unique, and that makes it a million times cooler than most stuff you see. cool paint, and the design is really coming together. you should trust your instincts, cause you have some great ideas and a good design sense.

awesome!



Offline hoodellyhoo

  • CB350F
  • Master
  • *****
  • Posts: 1,726
Re: 79' KZ750 CAFE "INSPIRED" TWIN .... "Rusty Nuts"
« Reply #179 on: August 23, 2010, 04:15:16 PM »
so i have recently become a big fan of Southern Wisconsin side roads ...


I don't think there is a bad road down in that part of the state. I WILL live down there at some point in my life, if for no other reason that the great riding roads.

Might I suggest you check out the slimey crud run on oct.3 if you haven't already been to one.
1972 CB350F (Back from the Dead!)- http://forums.sohc4.net/index.php?topic=20822.0
1965? S65 - Coming Eventually!
1972 CB750K2 (father-son project)
1976 CB750K6- (sold) http://forums.sohc4.net/index.php?topic=96859.0
1976 CB750K6 (sold)- http://forums.sohc4.net/index.php?topic=62569.0

Offline Spikeybike

  • when planting C4 at your enemy's base make sure you don't use a
  • Really Old Timer ...
  • *******
  • Posts: 7,265
  • member #1150
Re: 79' KZ750 CAFE "INSPIRED" TWIN .... "Rusty Nuts"
« Reply #180 on: August 23, 2010, 07:23:52 PM »
i have limited access to the web  (friends houses)  so to cover a few bases here ...

i think as far as lyrics Generator was my fav ... but like you said, it's a bit over-produced .. Suffer is IMO when they really mastered their sound (i dig the punk rock harmonizing)     ... had no idea the drummer from stray cats was the slim jim guy  :o

the rear end IS a little lumpy .. i was gonna putty and sand it, the only reason i havn't ...is i was thinking the rough look kinda went with the theme ... but it does bug me ....(and of coarse now that you pionted it out , it'll bug me more  ::) )


Offline greasy j

  • lanesplitting
  • Expert
  • ****
  • Posts: 853
  • non serviam
    • Dimale Painting & Restoration
Re: 79' KZ750 CAFE "INSPIRED" TWIN .... "Rusty Nuts"
« Reply #181 on: August 27, 2010, 10:27:10 AM »
sorry to draw attention to it,

I remember you saying you had a limited budget. at my paint store they have little tubes of laquer putty for 10 bucks or so, but the big huge tube is only $5. go figure. on rounded stuff like the fender, especially when it is curving in 2 directions, I'll use those rubbery plastic putty knives, or just make my own. find something like soft plastic then bend it to the shape of the fender and smooth the stuff over. cool thing is that stuff sands like nothing and dries instantly with no hardener.

but my paint store said they might stop carrying it in CA... they have a replacement product I tried from evercoat, that comes in a caulk tube and the stuff and hardener comes out all at once. they were giving it away for free to get people to try it. you might be able to just ask about it at a car paint store and they might give you one. but it's less buzz-inducing and not as easy to sand.

wish I was in the same area, I'd ask if I could cruise over and check it out. rock on my friend.

Offline Skonnie Boy

  • Cold cock
  • Hot Shot
  • ***
  • Posts: 689
  • Life is not like a box of chocolates.
Re: 79' KZ750 CAFE "INSPIRED" TWIN .... "Rusty Nuts"
« Reply #182 on: September 03, 2010, 12:03:09 AM »
so i have recently become a big fan of Southern Wisconsin side roads ...


I don't think there is a bad road down in that part of the state. I WILL live down there at some point in my life, if for no other reason that the great riding roads.

Might I suggest you check out the slimey crud run on oct.3 if you haven't already been to one.

Its true.  Once you reach the WI border, its like a god poster.  Rays of sunlight break through the clouds an welcome you to a land that has hills and curvy roads.

Nice rebuild.  I dig where its going.  I think you're making it too nice and polished, but if I had my way everything would be covered in rust and road dirt and Simple Green would be illegal.  So screw me.
"Yeah, I'm hip about time. But I just gotta go."

Offline Old75_ratafe

  • CB750 Cave Spelunking
  • Expert
  • ****
  • Posts: 801
  • 1975 CB750K
Re: 79' KZ750 CAFE "INSPIRED" TWIN .... "Rusty Nuts"
« Reply #183 on: September 03, 2010, 01:18:20 AM »
damn spikey is there anything u can't make...  Just do us a favor and keep your friends with lighters away from this one.  Seriously bad ass build, your making me itch to go get a drill and attack my bike with it...  Maybe next summer I just wanna get the damn thing ridable right now.  Black primer and gloss black are all u need man  ;)

Hey greasy you get a new avi or did I just miss that badassness before man?
1975 CB750K
Project Back in Black

Sent from my Texas Instruments TI99/4A Computer

Offline Retro Rocket

  • Eggs are hard due too a
  • Really Old Timer ...
  • *******
  • Posts: 19,279
  • ROCK & ROLL
Re: 79' KZ750 CAFE "INSPIRED" TWIN .... "Rusty Nuts"
« Reply #184 on: September 03, 2010, 04:21:39 PM »
sorry to draw attention to it,

I remember you saying you had a limited budget. at my paint store they have little tubes of laquer putty for 10 bucks or so, but the big huge tube is only $5. go figure. on rounded stuff like the fender, especially when it is curving in 2 directions, I'll use those rubbery plastic putty knives, or just make my own. find something like soft plastic then bend it to the shape of the fender and smooth the stuff over. cool thing is that stuff sands like nothing and dries instantly with no hardener.

but my paint store said they might stop carrying it in CA... they have a replacement product I tried from evercoat, that comes in a caulk tube and the stuff and hardener comes out all at once. they were giving it away for free to get people to try it. you might be able to just ask about it at a car paint store and they might give you one. but it's less buzz-inducing and not as easy to sand.

wish I was in the same area, I'd ask if I could cruise over and check it out. rock on my friend.

Lacquer putty or spot putty is just that, it is for tiny blemishes in a surface ready for paint. Spot putty shrinks over time and if used for shaping or in large amounts, it will eventually fall right back out. If shaping {i know it is harder to sand} you are far better off to use bondo or micro balloons, which is far easier to sand.

Mick
750 K2 1000cc
750 F1 970cc
750 Bitsa 900cc
If You can't fix it with a hammer, You've got an electrical problem.

Offline Spikeybike

  • when planting C4 at your enemy's base make sure you don't use a
  • Really Old Timer ...
  • *******
  • Posts: 7,265
  • member #1150
Re: 79' KZ750 CAFE "INSPIRED" TWIN .... "Rusty Nuts"
« Reply #185 on: September 03, 2010, 11:26:22 PM »
 ..... Just do us a favor and keep your friends with lighters away from this one.... 

 ;D ;D ;D ;D ;D.. waaay ahead of ya there , i've actaully had that same thought

Quote
I think you're making it too nice and polished, but if I had my way everything would be covered in rust and road dirt
i actually agree with you .....  i wanted it grimey looking ..  i left alot of stuff just how it was though, like the shock springs are still all rusty ,but i painted the rest of the shock.. and i'm considering leaving the motor as is (no paint.....at all)    ...but i'm still undecided on that

Quote
Lacquer putty or spot putty is just that, it is for tiny blemishes in a surface ready for paint. Spot putty shrinks over time and if used for shaping or in large amounts, it will eventually fall right back out. If shaping {i know it is harder to sand} you are far better off to use bondo or micro balloons, which is far easier to sand.
and excellent point Mick (and an often over looked one too)  ....i was just staring at the rear end last night , debating if i wanted to fix it or not ...because, as i said before, it does bug me a little that it's not "perfect"... but at the time that's what i wanted ..now that the bike has a more complete look to it the little imperfections are starting to stick out like sore thumbs  ... hmmmmmm, what to do

Offline Old75_ratafe

  • CB750 Cave Spelunking
  • Expert
  • ****
  • Posts: 801
  • 1975 CB750K
Re: 79' KZ750 CAFE "INSPIRED" TWIN .... "Rusty Nuts"
« Reply #186 on: September 03, 2010, 11:38:53 PM »
Sorry man someone had to say it.  I might as well be that guy  ::)  As far as the bike goes I love it, its professional... but still out there and real and ridable. I say just don't over think it and let your creativity go where it may.... its worked good so far man.
1975 CB750K
Project Back in Black

Sent from my Texas Instruments TI99/4A Computer

Offline greasy j

  • lanesplitting
  • Expert
  • ****
  • Posts: 853
  • non serviam
    • Dimale Painting & Restoration
Re: 79' KZ750 CAFE "INSPIRED" TWIN .... "Rusty Nuts"
« Reply #187 on: September 06, 2010, 02:19:35 PM »
damn spikey is there anything u can't make...  Just do us a favor and keep your friends with lighters away from this one.  Seriously bad ass build, your making me itch to go get a drill and attack my bike with it...  Maybe next summer I just wanna get the damn thing ridable right now.  Black primer and gloss black are all u need man  ;)

Hey greasy you get a new avi or did I just miss that badassness before man?

yeah, I changed the avatar. pretty funny, huh. makes me wanna kick a guy down a well.

and yeah, what mick said is totally right. I just figured it didn't need reshaping just a little tiny bit for low spots. the stuff does shrink, so you wanna leave it a tad proud. for heavier stuff I like the evercoat brand of 'bondo'. i call it bondo but it's not. kinda like q-tips or loctite or any other brand that has become the general term for something.

Offline scrapfink

  • Full Member
  • *
  • Posts: 17
Re: 79' KZ750 CAFE "INSPIRED" TWIN .... "Rusty Nuts"
« Reply #188 on: October 20, 2010, 03:23:56 PM »
I know I am jumping on this a bit late in the game, but what gauges did you use? I've got the original speedo mocked up on a single bracket, but I would really like to have both tach and speedo.. just smaller, as with yours. Also, what is the drive ratio for both?
1980 CB650c
1978 KZ750B (project)

Offline Spikeybike

  • when planting C4 at your enemy's base make sure you don't use a
  • Really Old Timer ...
  • *******
  • Posts: 7,265
  • member #1150
Re: 79' KZ750 CAFE "INSPIRED" TWIN .... "Rusty Nuts"
« Reply #189 on: October 21, 2010, 11:14:52 AM »
http://www.jcwhitney.com/chrome-speedometer-2-1/4/p2008923.jcwx?filterid=d10293y1980j3

these are the ones i have (assumimg your building a KZ and not a CB)

a simple search on JCWhitney will give ya all the answers you need my man  ;)

Offline four_shot

  • Full Member
  • *
  • Posts: 56
    • For the Cherokee lover in you.
Re: 79' KZ750 CAFE "INSPIRED" TWIN .... "Rusty Nuts"
« Reply #190 on: October 22, 2010, 01:00:32 PM »
Get it fired yet?
in memory of Dave "Gonzo" Steele

Offline Really?

  • I've come to the conclusion that I AM a
  • Really Old Timer ...
  • *******
  • Posts: 5,276
Re: 79' KZ750 CAFE "INSPIRED" TWIN .... "Rusty Nuts"
« Reply #191 on: October 22, 2010, 03:25:04 PM »
Get it fired yet?

NOOOOOO don't say that!
I don't have a motorcycle, sold it ('85 Yamaha Venture Royale).  Haven't had a CB750 for over 40 years.

The Wife's Bike - 750K5
The Kid's Bike - 750K3

Offline Spikeybike

  • when planting C4 at your enemy's base make sure you don't use a
  • Really Old Timer ...
  • *******
  • Posts: 7,265
  • member #1150
Re: 79' KZ750 CAFE "INSPIRED" TWIN .... "Rusty Nuts"
« Reply #192 on: October 22, 2010, 04:35:14 PM »
 ;D ;D ;D ;D ;D ;D


...no not yet , gotta get a coil and probly points while i'm at it

Offline Old75_ratafe

  • CB750 Cave Spelunking
  • Expert
  • ****
  • Posts: 801
  • 1975 CB750K
Re: 79' KZ750 CAFE "INSPIRED" TWIN .... "Rusty Nuts"
« Reply #193 on: October 22, 2010, 07:49:51 PM »
Get it fired yet?

NOOOOOO don't say that!

Eeee yea bad choice of words  ;)
1975 CB750K
Project Back in Black

Sent from my Texas Instruments TI99/4A Computer

Offline four_shot

  • Full Member
  • *
  • Posts: 56
    • For the Cherokee lover in you.
Re: 79' KZ750 CAFE "INSPIRED" TWIN .... "Rusty Nuts"
« Reply #194 on: November 07, 2010, 10:38:09 PM »
in memory of Dave "Gonzo" Steele

Offline Spikeybike

  • when planting C4 at your enemy's base make sure you don't use a
  • Really Old Timer ...
  • *******
  • Posts: 7,265
  • member #1150
Re: 79' KZ750 CAFE "INSPIRED" TWIN .... "Rusty Nuts"
« Reply #195 on: November 08, 2010, 07:49:09 PM »
 ;D ;D ;D ;D ;D ;D

Offline Old75_ratafe

  • CB750 Cave Spelunking
  • Expert
  • ****
  • Posts: 801
  • 1975 CB750K
Re: 79' KZ750 CAFE "INSPIRED" TWIN .... "Rusty Nuts"
« Reply #196 on: November 12, 2010, 08:15:21 PM »
We'll stop doing it when you stop laughing  ;)
1975 CB750K
Project Back in Black

Sent from my Texas Instruments TI99/4A Computer

Offline Spikeybike

  • when planting C4 at your enemy's base make sure you don't use a
  • Really Old Timer ...
  • *******
  • Posts: 7,265
  • member #1150
Re: 79' KZ750 CAFE "INSPIRED" TWIN .... "Rusty Nuts"
« Reply #197 on: November 20, 2010, 09:18:46 PM »

stainless steel rock guard on the headlight .. pretty cool 

check out my new garage....  it even came with a house  ;D


Offline Zaipai

  • I am getting closer to being an
  • Old Timer
  • ******
  • Posts: 3,400
    • My Home page
Re: 79' KZ750 CAFE "INSPIRED" TWIN .... "Rusty Nuts"
« Reply #198 on: November 20, 2010, 10:12:19 PM »
Dude, Awesome garage! Nice score. Do I see 3 bikes? hum.. CB550, KZ750 and ??? Glad to see the bike shaping up..

.: Scott :.
Its my Avatar..

75 CB550F  | 


Offline Spikeybike

  • when planting C4 at your enemy's base make sure you don't use a
  • Really Old Timer ...
  • *******
  • Posts: 7,265
  • member #1150
Re: 79' KZ750 CAFE "INSPIRED" TWIN .... "Rusty Nuts"
« Reply #199 on: November 20, 2010, 10:35:46 PM »
thats the title-less cb650 that i traded a pistol for