Author Topic: OIL (Read 8036 times)

brazwell · « **Reply #50 on:** July 23, 2008, 08:03:56 PM »

Were the curb feelers on my bike a stock feature?

333 · « **Reply #51 on:** July 23, 2008, 08:07:59 PM »

Don't EVEN get an "air" thread started!!!

http://forums.sohc4.net/index.php?topic=20778.0

jhasewhite · « **Reply #52 on:** July 23, 2008, 08:13:11 PM »

Marvel mystey oil?

any thoughts?

brazwell · « **Reply #53 on:** July 23, 2008, 08:18:40 PM »

How long can I expect my stainless hardware to remain stain free?

motoracergabe · « **Reply #54 on:** July 23, 2008, 09:24:28 PM »

oil?

only pure vegetable oil go in my bikes.

cafe750 · « **Reply #55 on:** July 23, 2008, 09:42:19 PM »

Can I fit a 750 motor into a 550 frame? If I can, what sort of oil should I put into the tires? Oh, and my left turn signal only blinks when I push the turn signal button, with the ignition on...what do I do now?

bryanj · « **Reply #56 on:** July 23, 2008, 10:08:01 PM »

PANIC

Buber · « **Reply #57 on:** July 24, 2008, 12:51:37 AM »

No, no, first rule is DON'T PANIC, remain calm....

Shenanigans · « **Reply #58 on:** July 24, 2008, 03:12:41 AM »

How do I club mans?

Clubmans clumb mans I just wanna increase performance carpy harley rim pods

GUNS PANIC

Steelo · « **Reply #59 on:** July 24, 2008, 04:08:07 AM »

As I said in another thread - If you are having that nuisance chattering at idle noise stop talking to yourself!

super pasty white guy · « **Reply #60 on:** July 24, 2008, 04:10:48 AM »

Those 120s look small, how big a tire can I put on?

hymodyne · « **Reply #61 on:** July 24, 2008, 04:41:23 AM »

when my engine is running, my tach gauge begins to move, is this a problem?

troppo · « **Reply #62 on:** July 24, 2008, 05:13:47 AM »

Quote from: hymodyne on July 24, 2008, 04:41:23 AM

when my engine is running, my tach gauge begins to move, is this a problem?

Only if it moves away from the bike

Gordon · « **Reply #63 on:** July 24, 2008, 06:33:13 AM »

Quote from: Steelo on July 24, 2008, 04:08:07 AM

As I said in another thread - If you are having that nuisance chattering at idle noise stop talking to yourself!

Or leave your wife at home...

Roach Carver · « **Reply #64 on:** July 24, 2008, 07:28:16 AM »

what size drill bit should i use on my jets to run pods with a kerker and cafe seat.

Gordon · « **Reply #65 on:** July 24, 2008, 07:34:56 AM »

Okay listen up everybody!

The answer is 42!!

Shenanigans · « **Reply #66 on:** July 24, 2008, 07:36:03 AM »

4211?

martino1972 · « **Reply #67 on:** July 24, 2008, 09:35:24 AM »

i replaced my main jets with migwelder tips,what kind of handle bar grips do i have to use now???

Roach Carver · « **Reply #68 on:** July 24, 2008, 09:49:04 AM »

what a noob question. you dont even need handle bars now

333 · « **Reply #69 on:** July 24, 2008, 12:14:09 PM »

What are "handle bars"? Is it a new kind of bar like an oyster bar, or country bar or gay bar?

rbmgf7 · « **Reply #70 on:** July 24, 2008, 12:21:05 PM »

how many cams does my bike have?

oldfett · « **Reply #71 on:** July 24, 2008, 12:32:53 PM »

To save money on supplies super glue with red food coloring is the same as red loctite

bunghole · « **Reply #72 on:** July 24, 2008, 12:40:22 PM »

Good Tip.

I use Land O Lakes Butter for assembly lube. Just finish up before it goes rancid.

oldfett · « **Reply #73 on:** July 24, 2008, 12:41:58 PM »

Also make sure to put some milk in their when assembling to make sure those rods get big and strong.

scott_cb650 · « **Reply #74 on:** July 24, 2008, 07:52:59 PM »

Nice, thanks for having fun with this.

I was telling my son that "oil" is such a volatile subject that all one has to do is say the word and arguments/opinions/experiences/rumors/etc. would start to fly.

I love this site.

OIL

News:

Author Topic: OIL (Read 8036 times)

motoracergabe

Steelo

troppo

martino1972