Author Topic: All of you with Bobbers - Let's see em' (Read 66510 times)

cormier1989 · « **Reply #100 on:** June 19, 2009, 10:46:36 AM »

its in a topic called "solo seat and ideas with pics"

cdoggy81 · « **Reply #101 on:** June 19, 2009, 09:36:39 PM »

You mean: "bobber solo seat ideas needed along with pics" ....

http://forums.sohc4.net/index.php?topic=53389.0

-Did you cut the frame or rear any?
-Did you bring the mounting points on the seat in any? Mine are a bit too wide. I'll take & show you what I mean.

cormier1989 · « **Reply #102 on:** June 21, 2009, 07:49:27 AM »

i didnt modify the bike frame at all with the exception of welding the spring perches on.

The_Crippler · « **Reply #103 on:** June 25, 2009, 06:11:26 PM »

Quote from: cormier1989 on June 16, 2009, 02:58:05 PM

there she is! the fugly duck

Hey - I needed a good one for my first post, and you just handed it to me. I recently acquired a 650C of my own that I was planning a bobber project with - and my intention was black and copper like yours. I'd be very interested to know where you found that seat and tank.

cormier1989 · « **Reply #104 on:** June 25, 2009, 09:30:46 PM »

i got my tank, seat and seat springs off of ebay. I used threaded couplings with machine thread to mount my tank. Drilled a hole in the backbone and welded them in place. The seat is by ultima, and my springs are from justified deffiance.

The_Crippler · « **Reply #105 on:** June 26, 2009, 08:40:27 AM »

What model/size tank is it?

Also, I looked at your other thread about mounting the seat...do you have any other pictures that show it attached? I see that you used some cotter pins on the springs, but I couldn't quite tell from those pics how they all went together on the back.

cormier1989 · « **Reply #106 on:** June 27, 2009, 09:04:55 AM »

ill try to get some more pics up. I have to get my friends to take the pics for me because i dont have a camera.

cormier1989 · « **Reply #107 on:** June 27, 2009, 09:06:20 AM »

oh yea, i dont know the manufacturer of the tank and its either a 2.2 of 2.5 gal mustang tank. its got a 2 3/4in wide tunnel and its 2 3/4 deep.

fdbrat · « **Reply #108 on:** July 04, 2009, 10:11:13 PM »

Flying J · « **Reply #109 on:** July 04, 2009, 11:21:01 PM »

turned out pretty good. wasnt there supposed to be some copper can on that thing? and is that big disk a gigantic mirror or does the picture just make it look that way? Fender look pretty natural on there.

fdbrat · « **Reply #110 on:** July 05, 2009, 08:31:08 PM »

The disk is a big ol mirror. I can see god in that thing. haha. Yeah I am going to cram all the wires in to the copper can sooner or latter. Yes I do love the fender.

cafeconleche · « **Reply #111 on:** July 06, 2009, 10:41:28 AM »

I saw Bob Davidson out and about today

BT650 · « **Reply #112 on:** July 06, 2009, 08:02:48 PM »

Since someone posted a Harley, I thought it safe to post my newest bobber (and yes it's a Yamaha) but it has the look I was after on the original CB650.

starion88esir · « **Reply #113 on:** July 08, 2009, 05:37:07 AM »

How much of a stretch do you have on that XS chopper? I'd like to see a side view. That Harley... wow... poor bike.

cormier1989 · « **Reply #114 on:** July 08, 2009, 03:25:02 PM »

thats a sweet pan head rat rod. Not to mension the sweet xs 650. I wish i could get my hands on one of those to chop. Same with the pan.

BT650 · « **Reply #115 on:** July 09, 2009, 04:23:25 PM »

Quote from: starion88esir on July 08, 2009, 05:37:07 AM

How much of a stretch do you have on that XS chopper? I'd like to see a side view. That Harley... wow... poor bike.

It's a 3.5" stretch. Here's a side shot.

firefighter_zach · « **Reply #116 on:** July 09, 2009, 07:51:19 PM »

that thing is gorgeous!!! it is exactly the way a bobber should look. clean, low, and mean. WELL DONE bt650... well done

Hurricanes10 · « **Reply #117 on:** July 27, 2009, 08:37:13 PM »

1974 CB550

TheJawsOfDeath · « **Reply #118 on:** July 28, 2009, 09:53:25 PM »

Here's mine in progress. Mods: chopped and relocated fender, homemade solo seat, lowered, 4-1 mac exhaust, no front fender, no signals, small tail light. Pics were taken with a cellphone sorry bout the bad quality!

bmikkalson · « **Reply #119 on:** July 29, 2009, 01:50:39 AM »

daredevilsadvocate · « **Reply #120 on:** August 24, 2009, 10:38:04 AM »

shouldn't this thread remain at the top seeing as us bobbers/chopper peeps are in the minority?

...im jus sayin...

~dd

shaunzo · « **Reply #121 on:** August 24, 2009, 12:24:08 PM »

here's mine all done! lemme know what you think.

tosc · « **Reply #122 on:** September 04, 2009, 10:47:11 AM »

anyone live in MI and want to help me make my bobber this winter? or know of a shop that might weld the hardtail on as i currently dont have a welder.

bobbyrivera · « **Reply #123 on:** September 19, 2009, 02:15:39 AM »

Here's the latest version of my CB550K...still tons of work to be done but it's getting there (sorry for the crappy pic): It's not as "squatty" as it looks in the photo. I'll try to update the posts in the "build" thread I have soon. here's the thread: http://forums.sohc4.net/index.php?topic=42338.0

cheseburger · « **Reply #124 on:** October 04, 2009, 01:12:17 PM »

80 CM400t bobber. Got stater rebuilt in Louisiana for $240 .

News:

Author Topic: All of you with Bobbers - Let's see em' (Read 66510 times)

BT650

BT650

Hurricanes10

daredevilsadvocate

tosc

bobbyrivera

cheseburger