Author Topic: 1979 cb650 rear chain spec  (Read 4625 times)

0 Members and 2 Guests are viewing this topic.

Offline MMICAFE

  • Enthusiast
  • **
  • Posts: 194
1979 cb650 rear chain spec
« on: January 28, 2009, 08:34:00 PM »
like the title says i am in dire need of the rear chain deflection everytime i shift the chain slaps the guard and i dont like that  sound :-[ so if anyone has the spaec and can help me out please pm me or just let me know on here
1974 Honda CB450 super sport (sold sniff sniff) (my first bike)

1979 Honda CB650 (we have a love hate relationship)

2008 Honda metropolitan (sold kinda miss it for the gas mileage)

Offline scunny

  • Old Timer
  • ******
  • Posts: 4,618
  • don't call me expert
Re: 1979 cb650 rear chain spec
« Reply #1 on: January 28, 2009, 09:02:31 PM »
15mm-25mm slack  at the bottom  midway between both sprockets
past-cb100,ts250,cb500,cb500,gs1000,gs650g.phillips traveller
present-CB 650 retro
            VTR1000F3
           XL250S riverbed rocket
           TS250[sold]
           TS185[sold]
           XL125S[sold]
           MT50 (white)
           MT50 (red)[sold]
           KN250/XS400 project
           XR/XL250 bitsa under construction
           SL100[sold]
           XL250R
           pedal(pub bike) leaks oil
my gallery http://gallery.sohc4.net/members/personal/scunny

Offline nickjtc

  • I was numero dieci
  • Old Timer
  • ******
  • Posts: 4,210
  • Yamaha XT500 'Gromit'
Re: 1979 cb650 rear chain spec
« Reply #2 on: January 28, 2009, 09:09:22 PM »
What scunny said.

Per the manual:

Inspection
1. Turn the engine off, place the motorcycle on the centre stand and shift the transmission into neutral.
2. Check slack in the lower drive chain run midway between the sprockets.
Drive chain slack should be adjusted to allow approximately 15-25mm (5/8"-1.0") vertical movement by hand. Rotate the rear wheel and check drive chain slack as the wheel rotates.
Drive chain slack should remain constant as the wheel rotates. If the chain is slack in one section and taut in another, some links are kinked and binding. Binding can frequently be eliminated by lubrication.

etc etc

Fit a Scottoiler. ;)
Nick J. Member #3247

2008 Triumph Tiger 1050
1977 Suzuki GS750

"That which does not kill us reminds us to wear proper motorcycle clothing...."

Offline scunny

  • Old Timer
  • ******
  • Posts: 4,618
  • don't call me expert
Re: 1979 cb650 rear chain spec
« Reply #3 on: January 28, 2009, 09:11:33 PM »
well said by the scottoiler rep  ;D
past-cb100,ts250,cb500,cb500,gs1000,gs650g.phillips traveller
present-CB 650 retro
            VTR1000F3
           XL250S riverbed rocket
           TS250[sold]
           TS185[sold]
           XL125S[sold]
           MT50 (white)
           MT50 (red)[sold]
           KN250/XS400 project
           XR/XL250 bitsa under construction
           SL100[sold]
           XL250R
           pedal(pub bike) leaks oil
my gallery http://gallery.sohc4.net/members/personal/scunny

Offline nickjtc

  • I was numero dieci
  • Old Timer
  • ******
  • Posts: 4,210
  • Yamaha XT500 'Gromit'
Re: 1979 cb650 rear chain spec
« Reply #4 on: January 28, 2009, 09:22:22 PM »
well said by the scottoiler rep  ;D

Disclaimer: Nick J has no interest in Messrs Scottoiler, whether it be financial or otherwise! ;D

But for the record, as most of you will have read ad nauseum over the last 2 1/2 years, I will not have a chain driven bike without one. In the 20,000+km I've ridden Sophie (with the aforementioned Scottoiler) I've adjusted the chain.....well actually I cannot remember the last time I adjusted the chain.
Nick J. Member #3247

2008 Triumph Tiger 1050
1977 Suzuki GS750

"That which does not kill us reminds us to wear proper motorcycle clothing...."