« previous next »
Pages: [1]   Go Down

Author Topic: R90/6 before & after.  (Read 2070 times)

0 Members and 3 Guests are viewing this topic.

Offline Speed King

  • Enthusiast
  • **
  • Posts: 218
R90/6 before & after.
« on: January 29, 2009, 02:00:32 PM »
From total geek to total chic.





Logged

Offline Bob Wessner

  • "Carbs Suck!"
  • Really Old Timer ...
  • *******
  • Posts: 10,079
Re: R90/6 before & after.
« Reply #1 on: January 29, 2009, 02:06:37 PM »
Nice! I've always had a soft spot for Beemers.. but not the $.  :'(
Logged
We'll all be someone else's PO some day.

Offline tsflstb

  • Expert
  • ****
  • Posts: 918
Re: R90/6 before & after.
« Reply #2 on: January 29, 2009, 04:34:27 PM »
That's nice.  I can appreciate both the before and after versions.  Amazing how smooth that engine could idle and run when everything was adjusted right.  Is that a Corbin seat or did you have the stock seat re-done?

I wish I could have kept my R80, but hurricane Ike made a mess around the house that required some cash.  There was just a nice solid feel to every part you touch on those airheads.  I can see why they hold their value -- it's the only bike I haven't sold for a loss. 
Logged

Offline Speed King

  • Enthusiast
  • **
  • Posts: 218
Re: R90/6 before & after.
« Reply #3 on: January 29, 2009, 05:11:52 PM »
This thing runs so good it's almost hard to believe. It is a Corbin seat.
Logged

Offline nickjtc

  • I was numero dieci
  • Old Timer
  • ******
  • Posts: 4,210
  • Yamaha XT500 'Gromit'
Re: R90/6 before & after.
« Reply #4 on: January 29, 2009, 08:31:40 PM »
Yummy!
Logged
Nick J. Member #3247

2008 Triumph Tiger 1050
1977 Suzuki GS750

"That which does not kill us reminds us to wear proper motorcycle clothing...."

fuzzybutt

  • Guest
Re: R90/6 before & after.
« Reply #5 on: January 29, 2009, 10:00:14 PM »
man, i'd love to get my hands on a /6 fixer-upper. when i actually worked on beemers for a living, it was ultra rare i would look at one of the systems or parts on one of the motorcycles and think "poorly engineered" only thing i didnt like was the fact that they used cast gears in the trans, though they would still ride and shift ok with just 1 or 2 of the shift dogs left.
Logged

Offline azuredesign

  • Knupping pin
  • Master
  • *****
  • Posts: 1,705
Re: R90/6 before & after.
« Reply #6 on: January 30, 2009, 05:12:00 AM »
Looks great! I especially like the seat and tail. Is the current front disc from a later model?
Logged

Offline Speed King

  • Enthusiast
  • **
  • Posts: 218
Re: R90/6 before & after.
« Reply #7 on: January 31, 2009, 11:26:21 AM »
Quote from: azuredesign on January 30, 2009, 05:12:00 AM
Looks great! I especially like the seat and tail. Is the current front disc from a later model?

I'm thinking someone must have changed it over the years, it was on when I got the bike about a year ago. All the specs I've seen for 75's say it came with a solid rotor.
Logged

Offline ken736cc

  • When the cops pull me over, I usually let them off with just a warning.
  • Enthusiast
  • **
  • Posts: 175
Re: R90/6 before & after.
« Reply #8 on: January 31, 2009, 03:43:00 PM »
Here is a picture of my R69S. Notice the subtle modifications made by my co workers.
I am surrounded by 200 plus horsepower bikes all day. They are not impressed by the 36 hp. sport model.
Logged
K0 sandcast(in process of restoration), K0 diecast, K0 cafe racer
BMW R69S daily rider, 71SL350, 71 SL100, 63 SS50

Offline Terry in Australia

  • Really Old Timer ...
  • *******
  • Posts: 33,321
  • So, what do ya wanna talk about today?
Re: R90/6 before & after.
« Reply #9 on: January 31, 2009, 04:54:01 PM »
Quote from: ken736cc on January 31, 2009, 03:43:00 PM
Here is a picture of my R69S. Notice the subtle modifications made by my co workers.
I am surrounded by 200 plus horsepower bikes all day. They are not impressed by the 36 hp. sport model.

Geez that pic brought back memories Ken, I "inherited" my older brother's R69S back in the 1970's, it had a chrome plated frame and "Dunstall" megaphones, my brother bought it from an oil rig worker who won it in a card game, it was a great bike, but the clods at the local Kawasaki dealership advanced the ignition and leaned off the mixture, causing two holed pistons!

Anyway, they fixed it and big bro rode it around until he locked up the gearbox, and rather than fix it, he bought a newer R75, and gave the old one to me. I joined the army before I got a chance to fix it, and I think he sold it for a couple of hundred bucks. Boy I wish I had it now, with a nice "Steib Replica" chair, it'd be sweeeet! Hang on to that beauty mate, they're only getting rarer! Cheers, Terry. ;D
Logged
I was feeling sorry for myself because I couldn't afford new bike boots, until I met a man with no legs.

So I said, "Hey mate, you haven't got any bike boots you don't need, do you?"

"Crazy is a very misunderstood term, it's a fine line that some of us can lean over and still keep our balance" (thanks RB550Four)

Offline ken736cc

  • When the cops pull me over, I usually let them off with just a warning.
  • Enthusiast
  • **
  • Posts: 175
Re: R90/6 before & after.
« Reply #10 on: January 31, 2009, 05:05:21 PM »
I have had it for about 20 years now. It has been in the family since new.  I recently did a 12 volt conversion so that it is safe to ride at night.  I have spent a lot of money to keep it going over the years. Everything from brakes to gearbox, clutch and pistons.  It helps to be a BMW trained master tech.
I think I will keep it.
Thanks
Logged
K0 sandcast(in process of restoration), K0 diecast, K0 cafe racer
BMW R69S daily rider, 71SL350, 71 SL100, 63 SS50

Offline detdrbuzzard

  • Enthusiast
  • **
  • Posts: 122
Re: R90/6 before & after.
« Reply #11 on: January 31, 2009, 06:33:06 PM »
the r90/6 pics are great. me personally i would have left it stock and went looking for an r90/s
Logged
'75 cb750k, '79 cb750/9k,'84aspencade '93gl1500se, '79cb 750f '85 cb450 sc '05 sunL 70

Offline Terry in Australia

  • Really Old Timer ...
  • *******
  • Posts: 33,321
  • So, what do ya wanna talk about today?
Re: R90/6 before & after.
« Reply #12 on: February 01, 2009, 01:23:26 AM »

Quote from: detdrbuzzard on January 31, 2009, 06:33:06 PM
the r90/6 pics are great. me personally i would have left it stock and went looking for an r90/s

I think it looks great too, but I also think it looked great before the "street chic" conversion, either incarnation in nice condition would be a great bike to own. Cheers, Terry. ;D
Logged
I was feeling sorry for myself because I couldn't afford new bike boots, until I met a man with no legs.

So I said, "Hey mate, you haven't got any bike boots you don't need, do you?"

"Crazy is a very misunderstood term, it's a fine line that some of us can lean over and still keep our balance" (thanks RB550Four)

Offline Speed King

  • Enthusiast
  • **
  • Posts: 218
Re: R90/6 before & after.
« Reply #13 on: February 01, 2009, 05:35:49 AM »
Quote from: detdrbuzzard on January 31, 2009, 06:33:06 PM
the r90/6 pics are great. me personally i would have left it stock and went looking for an r90/s

It's funny you should should say that because that was exactly my plan. I looked at every R90S I could find which wasn't many. And the price of anyhting decent was crazy. One of the reasons I chose this bike for this project was it had been repainted and the original pipes were gone. As you know, a bike can only be original once. Also the original fender, hb's, blinkers, seat etc. are all carefully packed & stored. If and when I would sell it, anyone would be able to make it look like the first picture without any trouble. Nothing has been cut.
« Last Edit: February 01, 2009, 05:44:19 AM by Speed King »
Logged

Offline ken736cc

  • When the cops pull me over, I usually let them off with just a warning.
  • Enthusiast
  • **
  • Posts: 175
Re: R90/6 before & after.
« Reply #14 on: February 01, 2009, 11:17:50 AM »
Those are both nice. I prefer the after. I bet that backrest is worth a few dollars.
Logged
K0 sandcast(in process of restoration), K0 diecast, K0 cafe racer
BMW R69S daily rider, 71SL350, 71 SL100, 63 SS50

Offline Speed King

  • Enthusiast
  • **
  • Posts: 218
Re: R90/6 before & after.
« Reply #15 on: February 01, 2009, 11:21:43 AM »
Quote from: ken736cc on February 01, 2009, 11:17:50 AM
Those are both nice. I prefer the after. I bet that backrest is worth a few dollars.

Yeah, you have any idea how much? It is a Reynolds and still has the Reynolds sticker on it. I would like to sell it. One guy told me $225-250.
Logged

Offline ken736cc

  • When the cops pull me over, I usually let them off with just a warning.
  • Enthusiast
  • **
  • Posts: 175
Re: R90/6 before & after.
« Reply #16 on: February 02, 2009, 01:59:16 PM »
That sounds like a good price. Check e bay or Bobs BMW. Are you the same SPEED KING as the one on the Hayabusa board?
Logged
K0 sandcast(in process of restoration), K0 diecast, K0 cafe racer
BMW R69S daily rider, 71SL350, 71 SL100, 63 SS50

Offline Speed King

  • Enthusiast
  • **
  • Posts: 218
Re: R90/6 before & after.
« Reply #17 on: February 02, 2009, 02:38:35 PM »
Quote from: ken736cc on February 02, 2009, 01:59:16 PM
That sounds like a good price. Check e bay or Bobs BMW. Are you the same SPEED KING as the one on the Hayabusa board?

Nope. I didn't know there was another SK. I'm on Jockey Journal & HAMB as Speed King. Thanks for the info.
Logged

fuzzybutt

  • Guest
Re: R90/6 before & after.
« Reply #18 on: February 03, 2009, 07:58:34 AM »
watch out for the customer service from bob's
Logged
Pages: [1]   Go Up
« previous next »