« previous next »
Pages: [1]   Go Down

Author Topic: Need VIN plate rivets  (Read 1280 times)

0 Members and 1 Guest are viewing this topic.

Offline KB02

  • Take it easy there, Sonny, I'm an
  • Old Timer
  • ******
  • Posts: 3,759
Need VIN plate rivets
« on: March 11, 2009, 09:22:11 AM »
I dropped off my frame and assorted other pieces to the sand blaster today. I took off the VIN plate from the steering neck. Does anyone happen to have some of the Rivets needed to put the plate back on? Or know where to get them?
Logged
1978 CB750K Project
2000 Ducati ST2
...and a pedal bike

Join the AMA today!!

My project thread Part I: K8 Project "Parts Bike"
My project thread Part II: Finishing (yeah, right) touches on Project "Parts Bike"

Offline bryanj

  • Really Old Timer ...
  • *******
  • Posts: 14,140
  • CB500 Number 1000036
Re: Need VIN plate rivets
« Reply #1 on: March 11, 2009, 09:41:57 AM »
90841-001-000
Logged
Semi Geriatric ex-Honda mechanic and MOT tester (UK version of annual inspection). Garage full of "projects" mostly 500/4 from pre 73 (no road tax in UK).

Remember "Its always in the last place you look" COURSE IT IS YOU STOP LOOKIN THEN!

Offline BobbyR

  • Really Old Timer ...
  • *******
  • Posts: 12,365
  • Proud Owner of the Babe Thread & Dirty Old Man
Re: Need VIN plate rivets
« Reply #2 on: March 11, 2009, 10:05:54 AM »
I saw some brads in a hardware store that you can use they have rounded tops.
Logged
Dedicated to Sgt. Howard Bruckner 1950 - 1969. KIA LONG KHANH.

But we were boys, and boys will be boys, and so they will. To us, everything was dangerous, but what of that? Had we not been made to live forever?

Offline markb

  • When I finish my current project I might be a
  • Master
  • *****
  • Posts: 1,615
Re: Need VIN plate rivets
« Reply #3 on: March 11, 2009, 10:34:04 AM »
What you need is are Type U drive screws.
Check out this thread:
http://forums.sohc4.net/index.php?topic=30904.0
Logged
1969 CB750 sandcast #97 restored - Sold Restoration thread link
1969 CB750 sandcaxt #576 - Sold
1969 CB750 sandcast #1553 - Sold
1969 CB750 sandcast #1990 - Sold
1969 CB750 sandcast #5383 restored - Sold Restoration thread link
1970 CB750 K0 restored - Sold
2010 H-D Tri Glide Ultra Classic (Huh?)

Offline Bill Vaughan

  • Enthusiast
  • **
  • Posts: 220
Re: Need VIN plate rivets
« Reply #4 on: March 11, 2009, 08:37:12 PM »
David Silver has them in stock under the part number listed in the post from BryanJ.  They're called "Screw 1.5x5 A"

http://www.davidsilverspares.co.uk/

Do yourself a favor and buy double what you need.  If one accidentally lands on the shop floor during installation, you'll never see it again.
Logged
1972 Z50A
1973 ST90
1975 CL360
1971 CB450
1975 CB550
1978 FLH
2003 FLSTS
2006 FLHRSI

Offline JLeather

  • Expert
  • ****
  • Posts: 775
Re: Need VIN plate rivets
« Reply #5 on: March 12, 2009, 09:35:49 AM »
I got a couple NOS ones from someone on this forum in Canada.  Can't remember who now though.
Logged
Pages: [1]   Go Up
« previous next »