Author Topic: What did you do to your bike today ?  (Read 3211707 times)

0 Members and 2 Guests are viewing this topic.

Offline Dimitri13

  • Not a
  • Master
  • *****
  • Posts: 1,603
  • 1974 CB550K
Re: What did you do to your bike today ?
« Reply #12275 on: October 12, 2012, 09:40:23 PM »
Went out to the garage today and removed the rear suspension. Shocks are getting canned unless I can figure out something fun or creative to do with them. EVERYTHING is covered in a thick coat of oil from a year of leaks. Not happy about trying to clean everything off. Degreasers and cleaners are going to bankrupt me.

Will be removing the swingarm bearings. I'll be using the hacksaw method, but I had a quick question. HondaMan's guide says to keep the saw parallel, does that mean I'll be cutting through the center spacer thing as well? Or am I just cutting into the bearings themselves?

Offline Terry in Australia

  • Really Old Timer ...
  • *******
  • Posts: 33,314
  • So, what do ya wanna talk about today?
Re: What did you do to your bike today ?
« Reply #12276 on: October 12, 2012, 11:21:13 PM »
Read some stuff in Hondaman's book & I have been cleaning up the K1's exhaust system.

I'm concerned that the unleaded fuel is going to rust it out quickly though - need to look into that



Is it a new pipe Brooksey? It wasn't unusual for HM300's to rust out in the first year or two of their life, but if yours are new, add a small amount (20 or 30 ml) of two stroke oil to every tank of fuel and the oil smoke will "fog" oil mist into every nook and cranny within your pipes, and protect them from rusting. Think about it, how many old two strokers have you ever seen with rusted out exhaust systems? Cheers, Terry. ;D
I was feeling sorry for myself because I couldn't afford new bike boots, until I met a man with no legs.

So I said, "Hey mate, you haven't got any bike boots you don't need, do you?"

"Crazy is a very misunderstood term, it's a fine line that some of us can lean over and still keep our balance" (thanks RB550Four)

maduncle

  • Guest
Re: What did you do to your bike today ?
« Reply #12277 on: October 13, 2012, 02:58:03 AM »

Today:

Bought a pair of paddock stands so I can work on bikes with both wheels in the air.

Installed a new 33 tooth sprocket on the CB450.

Took the VFR750 for a ride.

Cleaned out and rearranged my (cupboard sized) shed to create some space.

Sorted out some old junk for a garage sale in a couple of weeks (old tools and junk, no bike parts).

Listed some excess CB450 parts on eBay.

Looked at a 1985 VF1000F on eBay...

Offline FrankenFrankenstuff

  • Master
  • *****
  • Posts: 2,396
    • FrankenBike Stuff Store
Re: What did you do to your bike today ?
« Reply #12278 on: October 13, 2012, 03:01:50 AM »
Frigging brilliant Terry; little useful nuggets of great info and techniques is the reason I love this site!

maduncle

  • Guest
Re: What did you do to your bike today ?
« Reply #12279 on: October 13, 2012, 03:49:28 AM »
Frigging brilliant Terry; little useful nuggets of great info and techniques is the reason I love this site!

Too true!

And I often think of Terry as a 'useful nugget' .

Offline Terry in Australia

  • Really Old Timer ...
  • *******
  • Posts: 33,314
  • So, what do ya wanna talk about today?
Re: What did you do to your bike today ?
« Reply #12280 on: October 13, 2012, 01:50:34 PM »
Frigging brilliant Terry; little useful nuggets of great info and techniques is the reason I love this site!

Too true!

And I often think of Terry as a 'useful nugget' .


Thanks Cliff, (and Joe) if you buy that VF1000F I'll sell you my rare VF1000F workshop manual which you'll definitely need mate, 'cos (here comes another useful nugget from "The Nugetteer") the VF1000F was just about the biggest POS that Honda built in the 1980's. No joke, they were so bad Honda couldn't fix them so they just moved on and left VF1000F owners to suffer in (pre-internet) silence.

Honda wouldn't dare build a bike that bad again nowadays, they'd be "outted" on a grand scale. An old non-motorcycle friend of mine "inherited" one back in the early 1990's, with the intention of fixing it up and selling it for a profit. The local Honda shop said that they wouldn't even have it in their shop and parts were no longer available. He ended up giving it to Jeff at Ace Wreckers,because Jeff wouldn't give him any money for it. "The Nuggetteer says NO"! (but I'll still sell you my manual) ;D

Here's some VF1000F info: http://vfreek.tripod.com/id11.html
« Last Edit: October 13, 2012, 02:54:15 PM by Terry in Australia »
I was feeling sorry for myself because I couldn't afford new bike boots, until I met a man with no legs.

So I said, "Hey mate, you haven't got any bike boots you don't need, do you?"

"Crazy is a very misunderstood term, it's a fine line that some of us can lean over and still keep our balance" (thanks RB550Four)

Offline bruzer59

  • Full Member
  • *
  • Posts: 69
  • 1977 CB 750F
What did you do to your bike today ?
« Reply #12281 on: October 13, 2012, 06:07:32 PM »
Today i finished painting my CB750F gas tank , to match side covers & tailpiece
 I used auto-air-colors pearlized blue 3 coats. and 2 coats of clear i can't wait for the clear to harden so i can remount the gas tank

Offline piute

  • Piute
  • Full Member
  • *
  • Posts: 98
  • TRICK OR TREAT...B....es
Re: What did you do to your bike today ?
« Reply #12282 on: October 13, 2012, 07:14:53 PM »

   Like that Blue Bruzer ,
Today I put a new 630 chain on ,got my new rain gear to it out for a wind test ,I be damb it f...rained and hasn't stoped getting worse here in s.w.Mo.,
  I can believe how much quiter this bike got ,rain gears great at 35 bucks off flea-bay.My H.D. cover-all at 20+ yr's dont stop rain no-mo.
Ride to live Live for Jesus
1977 750 F2

Offline wardenerd

  • Expert
  • ****
  • Posts: 816
  • '77 550F '81 650C
Re: What did you do to your bike today ?
« Reply #12283 on: October 13, 2012, 07:30:22 PM »
polished chrome and aluminum repalced rusty bits.

Offline Dave B.

  • Full Member
  • *
  • Posts: 11
Re: What did you do to your bike today ?
« Reply #12284 on: October 13, 2012, 07:36:30 PM »
Finish painted my headers with high temp.paint.Hope it holds.Took off the oil pan  and checked the screen.It was clean.reinstalled the pan added oil. I will put the exhaust system on soon.Hop to ride a little tomorrow calling for 70 deg.  :)
New  owner of a 1976 CB 750 A .. bikes -1965 (?) 250 Harley, 1969 Honda CB 450(new).Yamaha XS650, Honda Helix, Kawasaki VN800, Kawasaki VN1500 and now a Vintage Hondamatic that needs TLC

Offline bruzer59

  • Full Member
  • *
  • Posts: 69
  • 1977 CB 750F
What did you do to your bike today ?
« Reply #12285 on: October 13, 2012, 10:48:52 PM »
Dave B.
        70 deg.. dam  this is only the third day this year we were NOT in the friggon 90s . down here   .......

Offline Terry in Australia

  • Really Old Timer ...
  • *******
  • Posts: 33,314
  • So, what do ya wanna talk about today?
Re: What did you do to your bike today ?
« Reply #12286 on: October 14, 2012, 12:50:03 AM »
Well what a diference a day makes. 24 hours ago it was cold, wet and miserable. I sat in my comfy chair looking out the patio window trying to make myself understand how it could still be winter in Oz in October? Today though, the sun was shining, the birds were probably singing, and all was right with the world.

Better still, the wife had gone out and left me to my own devices. I'd promised to mow the lawn, but of course, 5 minutes after she'd cleared the driveway, I was "headin' down the highway, looking for adventure, and whatever comes my way". I put 3 US gallons of 98 RON fuel in my tank ($19 US, Ouch!) and rode up into the mountains. I had a great day, although my back has been giving me some trouble so after a little over 3 hours and 100 miles I'd had enough for the day, and turned for home. I love this time of year, roll on summer! Cheers, Terry. ;D





I was feeling sorry for myself because I couldn't afford new bike boots, until I met a man with no legs.

So I said, "Hey mate, you haven't got any bike boots you don't need, do you?"

"Crazy is a very misunderstood term, it's a fine line that some of us can lean over and still keep our balance" (thanks RB550Four)

maduncle

  • Guest
Re: What did you do to your bike today ?
« Reply #12287 on: October 14, 2012, 01:27:29 AM »
Hey Terry - if you ever want company on a Sunday ride, call me!

BTW - I kinda knew about the VF1000F issues...

Today someone from Iceland bought a tank off me, he better be ready for a big postage cost!

Offline Paul Lowe

  • Enthusiast
  • **
  • Posts: 174
  • If you like then it is good...
Re: What did you do to your bike today ?
« Reply #12288 on: October 14, 2012, 02:35:11 AM »
New clutch cable to replace overlong non standard one, looks much neater now.

Replaced left side covers with allen head screws, tensioned chain and counted sprocket teeth.  Sprockets seem to be standard 17/38 think I'll leave it that way.  Need a new chain though I think just not sure what to get.

Got a price back on a new MAC 4 into 1 $360 plus $120 postage to Australia, decisions decisions...  any thoughts?

And of course had to go for a ride to test it all out!
My Honda sickness deepens

CB350F 1972
CB360G 1974
CB750 K1 1971
CT90 K0 1968
C102 1963
C50 1968
C70 1972
C90 1974
CL90 1968

1/2HP electric bike home made...

Offline CycleRanger

  • No comment about being an
  • Really Old Timer ...
  • *******
  • Posts: 5,429
  • Central Texas Shop Manual Advocate
Re: What did you do to your bike today ?
« Reply #12289 on: October 14, 2012, 10:46:55 AM »
Changed the oil in the K5. The harvest Classic is next week!
Drained the oil, didn't spill a drop. Not even on the Kerker. Yay, I'm so clever.....
Checked the old oil for sparklies, found only the "normal" amount. (Very few.)

Then I decided to finally try one of those neat-O keen chrome spin-on filters with the adapter I bought last year.

Spun it on, hey this is easy! Tightened it down like every other spin-oil filter I've installed over the last ~35 years.
Filled the bike with fresh 20-50 Castrol T4, spun the starter a bit, then started the bike.
Fifteen seconds later the o-ring seal on the chrome filter blew out and spewed oil all over the Kerker and the floor! :o >:( >:(
Talk about instant rejection from the K5!

Ok, fine, that's the end of that experiment. Perhaps I'll approach it again later but for today it's back to stock.

For Terry's amusement I will quote him here:
Ha ha, I've had a box full of those big crappy chrome spin on filters and have used them on and off for years, I put one on, it leaks, I take it off and replace it with a better "brand name" filter, then a year or two later I forget and put another one on, it leaks, I take it off, and so on and so forth. If you can get one that doesn't leak, use it by all means! Cheers, Terry. ;D

I can't say I wasn't warned.  Now, off to wash the beast so it's shiny for next week. ....And clean up the oil from the shop floor.  At least it's clean oil. ::) *sigh*
Do you have a copy of the Honda Shop Manual or Parts List for your bike? Get one here:
https://www.honda4fun.com/materiale/documentazione-tecnica
CB750K5        '79 XL250s     CL350K3
CB750K3        '76 XS650      '76 CJ360T

Offline Stev-o

  • Ain't no
  • Really Old Timer ...
  • *******
  • Posts: 34,309
  • Central Texas
Re: What did you do to your bike today ?
« Reply #12290 on: October 14, 2012, 10:53:08 AM »
CR - great story, sorry to laugh!  I've been tempted to try one too, but no way now. 
'74 "Big Bang" Honda 750K [836].....'76 Honda 550F.....K3 Park Racer!......and a Bomber!............plus plus plus.........

Offline CycleRanger

  • No comment about being an
  • Really Old Timer ...
  • *******
  • Posts: 5,429
  • Central Texas Shop Manual Advocate
Re: What did you do to your bike today ?
« Reply #12291 on: October 14, 2012, 11:51:44 AM »
CR - great story, sorry to laugh!  I've been tempted to try one too, but no way now.
Well, to reference Terry again, there are a couple name-brand filters that in theory would work better.
I'll wait until the next oil change and see if I'm brave enough to try it again. I'm still sold on the idea of it. ;D

Now I'm going to do a favor to everyone I'll be riding with next week and finally disconnect the turn signal buzzer on the K5. ;)
Do you have a copy of the Honda Shop Manual or Parts List for your bike? Get one here:
https://www.honda4fun.com/materiale/documentazione-tecnica
CB750K5        '79 XL250s     CL350K3
CB750K3        '76 XS650      '76 CJ360T

Offline 750resurrection

  • Hot Shot
  • ***
  • Posts: 288
Re: What did you do to your bike today ?
« Reply #12292 on: October 14, 2012, 02:23:08 PM »


Did the slow jet hand drilling per hondachopper - thanks to SOHC4 and the people here as well as HC - I think that's someone here not certain who.

Offline Bailgang

  • Scott
  • Old Timer
  • ******
  • Posts: 2,705
  • Indiana
Re: What did you do to your bike today ?
« Reply #12293 on: October 14, 2012, 02:55:55 PM »
Took my 550 out for what may have been it's last ride of the season, it turned out to be a nice day and was tempted to have my wife put on her helmet and ride with me but good thing I didn't ask because we had a storm coming in and the cross winds were nasty. Once I got back though I started wrenching on the 175, I got the ign coil I nabbed off ebay and got the bike together enough to fire up and sure enough the crazy thing did. Only problem now is that my volt meter showed it's charging system wasn't doing squat.
Scott


71 cb350 twin
77 cb750 F2
83 gl1100 Interstate

Online madmtnmotors

  • When did I get to be a
  • Really Old Timer ...
  • *******
  • Posts: 6,094
  • Sunny Central Florida
Re: What did you do to your bike today ?
« Reply #12294 on: October 14, 2012, 04:48:55 PM »
After replacing the coin seals under the cam towers on Friday on my "interim" project, test drove it yesterday only to have the motor continue to belch oil out onto my leg. Took the motor back out today. On a positive note, my homemade C-hook has enabled me to pull an engine from a fully assembled and running bike in just 90 minutes start to finish! A new personal record!





Halfway out!


Mighty tight!






She's out!




What's the sawzall for you ask?


To remove a little extra material! It has since had the rough edges filed off and touch-up paint applied.
« Last Edit: September 26, 2013, 06:27:34 AM by madmtnmotors »
TAMTF...


Wilbur



Projects:
"Evolution": http://forums.sohc4.net/index.php?topic=100352.0
"P.O. Debacle": http://forums.sohc4.net/index.php/topic,126692.msg1441661.html#msg1441661
F2/F3 O-rings: http://forums.sohc4.net/index.php?topic=113672.msg1300721#msg1300721
Cam Tower Studs: https://www.mcmaster.com/#93210a017/=t19sgp
Clean up that nasty harness: http://forums.sohc4.net/index.php?topic=137351.msg1549191#msg1549191
http://forums.sohc4.net/index.php/topic,148188.msg1688494.html#msg1688494
http://forums.sohc4.net/index.php/topic,139544.msg1579364.html#msg1579364
                                          
Charging system diagnosis: http://forums.sohc4.net/index.php?topic=1012.msg8345#msg8345
Get the manuals: http://manuals.sohc4.net/cb750k/
The Dragon: http://forums.sohc4.net/index.php?topic=45183.msg1571675#msg1571675
Headlight Switch: http://forums.sohc4.net/index.php?topic=113986.msg1283236#msg1283236
Branden's leak free top end thread: http://forums.sohc4.net/index.php?topic=107040.0
Engine Lifting Made Easy: http://forums.sohc4.net/index.php/topic,58210.msg1684742.html#msg1684742
                                      http://forums.sohc4.net/index.php/topic,100352.msg1675840.html#msg1675840
Static and Dynamic Timing: http://www.hondachopper.com/garage/carb_info/timing/timing1.html
Airbox Gasket Replacement: http://forums.sohc4.net/index.php/topic,114485.msg1290000.html#msg1290000
"Café" : http://forums.sohc4.net/index.php/topic,84697.msg953814.html#msg953814
PD Carb Choke Linkage: http://forums.sohc4.net/index.php/topic,100352.msg1669248.html#msg1669248
                                    http://forums.sohc4.net/index.php/topic,110931.msg1248354.html#msg1248354
                                    http://forums.sohc4.net/index.php/topic,48858.msg515204.html#msg515204
Follow up on your damn posts: http://forums.sohc4.net/index.php/topic,144305.msg1791605.html#msg1791605
Taiwanese Cam Chain Tensioners:  http://forums.sohc4.net/index.php/topic,155043.msg1774841.html#msg1774841
Gumtwo Seat Cover: http://forums.sohc4.net/index.php/topic,164440.msg1897366.html#msg1897366
Primary Drive: http://forums.sohc4.net/index.php/topic,166063.msg1919278.html#msg1919278
Tank Latch: http://forums.sohc4.net/index.php/topic,165975.msg1919495.html#msg1919495
Shorten your forks: http://vintage-and-classic-honda-s.456789.n3.nabble.com/How-to-shorten-forks-td4042465.html DO NOT CUT THE SPRINGS!
Clutch How To: http://vintage-and-classic-honda-s.456789.n3.nabble.com/How-to-change-and-adjust-a-clutch-SOHC-td4040391.html
Late model K7/K8/F2/F3 front sprocket cover removal: http://forums.sohc4.net/index.php/topic,178428.msg2072279.html#msg2072279
630 to 530 conversion: http://forums.sohc4.net/index.php/topic,180710.msg2094423.html#msg2094423

Sent from my Tandy TRS-80!

Offline CycleRanger

  • No comment about being an
  • Really Old Timer ...
  • *******
  • Posts: 5,429
  • Central Texas Shop Manual Advocate
Re: What did you do to your bike today ?
« Reply #12295 on: October 14, 2012, 04:53:34 PM »
On a positive note, my homemade C-hook has enabled me to pull an engine from a fully assembled and running bike in just 90 minutes start to finish! A new personal record!



Oh I want one of those! :o
Do you have a copy of the Honda Shop Manual or Parts List for your bike? Get one here:
https://www.honda4fun.com/materiale/documentazione-tecnica
CB750K5        '79 XL250s     CL350K3
CB750K3        '76 XS650      '76 CJ360T

Online madmtnmotors

  • When did I get to be a
  • Really Old Timer ...
  • *******
  • Posts: 6,094
  • Sunny Central Florida
Re: What did you do to your bike today ?
« Reply #12296 on: October 14, 2012, 04:58:34 PM »
On a positive note, my homemade C-hook has enabled me to pull an engine from a fully assembled and running bike in just 90 minutes start to finish! A new personal record!



Oh I want one of those! :o

I can't take full credit, another member posted this design on the forum here somewhere, but I have been unable to find the thread in order to give proper credit where due!
TAMTF...


Wilbur



Projects:
"Evolution": http://forums.sohc4.net/index.php?topic=100352.0
"P.O. Debacle": http://forums.sohc4.net/index.php/topic,126692.msg1441661.html#msg1441661
F2/F3 O-rings: http://forums.sohc4.net/index.php?topic=113672.msg1300721#msg1300721
Cam Tower Studs: https://www.mcmaster.com/#93210a017/=t19sgp
Clean up that nasty harness: http://forums.sohc4.net/index.php?topic=137351.msg1549191#msg1549191
http://forums.sohc4.net/index.php/topic,148188.msg1688494.html#msg1688494
http://forums.sohc4.net/index.php/topic,139544.msg1579364.html#msg1579364
                                          
Charging system diagnosis: http://forums.sohc4.net/index.php?topic=1012.msg8345#msg8345
Get the manuals: http://manuals.sohc4.net/cb750k/
The Dragon: http://forums.sohc4.net/index.php?topic=45183.msg1571675#msg1571675
Headlight Switch: http://forums.sohc4.net/index.php?topic=113986.msg1283236#msg1283236
Branden's leak free top end thread: http://forums.sohc4.net/index.php?topic=107040.0
Engine Lifting Made Easy: http://forums.sohc4.net/index.php/topic,58210.msg1684742.html#msg1684742
                                      http://forums.sohc4.net/index.php/topic,100352.msg1675840.html#msg1675840
Static and Dynamic Timing: http://www.hondachopper.com/garage/carb_info/timing/timing1.html
Airbox Gasket Replacement: http://forums.sohc4.net/index.php/topic,114485.msg1290000.html#msg1290000
"Café" : http://forums.sohc4.net/index.php/topic,84697.msg953814.html#msg953814
PD Carb Choke Linkage: http://forums.sohc4.net/index.php/topic,100352.msg1669248.html#msg1669248
                                    http://forums.sohc4.net/index.php/topic,110931.msg1248354.html#msg1248354
                                    http://forums.sohc4.net/index.php/topic,48858.msg515204.html#msg515204
Follow up on your damn posts: http://forums.sohc4.net/index.php/topic,144305.msg1791605.html#msg1791605
Taiwanese Cam Chain Tensioners:  http://forums.sohc4.net/index.php/topic,155043.msg1774841.html#msg1774841
Gumtwo Seat Cover: http://forums.sohc4.net/index.php/topic,164440.msg1897366.html#msg1897366
Primary Drive: http://forums.sohc4.net/index.php/topic,166063.msg1919278.html#msg1919278
Tank Latch: http://forums.sohc4.net/index.php/topic,165975.msg1919495.html#msg1919495
Shorten your forks: http://vintage-and-classic-honda-s.456789.n3.nabble.com/How-to-shorten-forks-td4042465.html DO NOT CUT THE SPRINGS!
Clutch How To: http://vintage-and-classic-honda-s.456789.n3.nabble.com/How-to-change-and-adjust-a-clutch-SOHC-td4040391.html
Late model K7/K8/F2/F3 front sprocket cover removal: http://forums.sohc4.net/index.php/topic,178428.msg2072279.html#msg2072279
630 to 530 conversion: http://forums.sohc4.net/index.php/topic,180710.msg2094423.html#msg2094423

Sent from my Tandy TRS-80!

Offline Jerry E.

  • Enthusiast
  • **
  • Posts: 201
Re: What did you do to your bike today ?
« Reply #12297 on: October 14, 2012, 06:21:28 PM »
Soda blasted my engine cases, then ran them thru the dishwasher. Beautiful, spotless, aluminum-ready to paint!
"Why jump from perfectly good airplanes? Because the door opens."

Offline Tews19

  • I am no
  • Really Old Timer ...
  • *******
  • Posts: 6,465
Re: What did you do to your bike today ?
« Reply #12298 on: October 14, 2012, 06:23:14 PM »
I posted in my build thread but have to show tthe video here too. From not running, last registered in 1971...

http://s1090.photobucket.com/albums/i373/Tews19/?action=view&current=116.mp4

To running...
1969 Honda CB750... Basket case
1970 Honda CB750 survivor.

Offline DJ_AX

  • Expert
  • ****
  • Posts: 1,279
  • ?!
Re: What did you do to your bike today ?
« Reply #12299 on: October 14, 2012, 07:57:14 PM »
Replaced the front wheel bearings... although the old ones didn't look too bad. At least now I know there are new ones in there. :)
~ Vincent . . . '75 CB750 K5 . . . '97 BMW r1100rt . . . had; '75 CB550 K1 (sold) . . .  '73 CB350G (gifted) HELL YEAH!
Disclaimer: I could be wrong. :)