« previous next »
Pages: [1]   Go Down

Author Topic: Printing an article from the Technical Library  (Read 1234 times)

0 Members and 1 Guest are viewing this topic.

Offline Magpie

  • Old Timer
  • ******
  • Posts: 3,318
Printing an article from the Technical Library
« on: January 01, 2006, 09:27:52 PM »
i'm having trouble printing this article on clutch rattle from the technical library http://sohc4.us/files/clutch_rattle.jpg  All I get is the top, left quarter of the page. Can anyone give me a tip on printing the whole thing please? Thanks, Cliff.
Logged

Offline Magpie

  • Old Timer
  • ******
  • Posts: 3,318
Re: Printing an article from the Technical Library
« Reply #1 on: January 01, 2006, 10:52:21 PM »
In the famous words of Rosanna Rosanna Dana - "never mind". I got it done. Has anyone actually done this modification?
Cheers,
Cliff.
Logged

Offline bryanj

  • Really Old Timer ...
  • *******
  • Posts: 14,094
  • CB500 Number 1000036
Re: Printing an article from the Technical Library
« Reply #2 on: January 02, 2006, 05:29:52 AM »
This was a standard fitment later on and the later bikes dont rattle as much trouble is last time i tried to get that plate i was told it was obsoleted
Logged
Semi Geriatric ex-Honda mechanic and MOT tester (UK version of annual inspection). Garage full of "projects" mostly 500/4 from pre 73 (no road tax in UK).

Remember "Its always in the last place you look" COURSE IT IS YOU STOP LOOKIN THEN!

Jim Shea

  • Guest
Re: Printing an article from the Technical Library
« Reply #3 on: January 02, 2006, 05:45:32 AM »
Cliff,
I didn't have a prob; try saving it as a document and then print? Also, click on print preview, if you can see the printing it should be OK?
Jim.
Logged

Offline Magpie

  • Old Timer
  • ******
  • Posts: 3,318
Re: Printing an article from the Technical Library
« Reply #4 on: January 02, 2006, 08:01:40 AM »
Jim: I solved it by saving the jpeg and playing with resizing it to print on one page for me. Took me awhile to figure that one out, too much cheer over the holidays I think.

Brianj: I'll check my dealer to see it can be found here.

I've just read the "Clutch Rebuild" article in the library - it's a good one as well. I'll have to pull my clutch again to see if I have all the steels in one direction.
What a great resource this place is.
Cliff.
Logged
Pages: [1]   Go Up
« previous next »