Author Topic: My experience with parts polishing (pictures attached) (Read 11680 times)

g8ts · « **Reply #50 on:** July 18, 2006, 12:09:36 PM »

WOW Raul,

Nice Job !!! Seems my spouse know's yours...

super pasty white guy · « **Reply #51 on:** July 23, 2006, 06:10:50 AM »

Concerning the question of how to protect the aluminum from oxidizing, I just saw this:

http://www.zoopseal.com

It's supposed to protect for 2 years. I don't have any experience with this- Anyone else?

Dave

einsteingarage · « **Reply #52 on:** July 23, 2006, 07:24:07 AM »

This comes off www.slickschoppers.com under tech articles...great webpage.

X-tream Metal Sealant is not a regular polish. I think it works so well because it was formulated specifically for sealing non-painted metals. If you wish to buy any go to http://www.jirehcycles.com

The part number is 103-6

and the best thing is it only cost $7.36!!!

g8ts · « **Reply #53 on:** July 23, 2006, 02:13:24 PM »

As long as your on the subject of cleaning. You have to check this product out. Its the highend waxes they use on boats. Nice stuff...(no I don't work for them just found there sight this summer when I was looking for car waxes. Was awesome on my bike too...Checkout there how to section

puppytrax · « **Reply #54 on:** July 23, 2006, 04:35:21 PM »

Quote from: g8ts on July 23, 2006, 02:13:24 PM

You have to check this product out...Checkout there how to section...

...

...Who??

mrbreeze · « **Reply #55 on:** July 23, 2006, 05:23:45 PM »

Yeah...ditto...who are we talking about?

bill440cars · « **Reply #56 on:** July 23, 2006, 07:59:54 PM »

How does that line go?

Oh yeah,"What We Have Here Is A Failure To Communicate!"

How many know where that line came from?

Later on, Bill

cbjunkie · « **Reply #57 on:** July 23, 2006, 08:28:21 PM »

only from the best movie of all time - cool hand luke...

50 eggs!

bill440cars · « **Reply #58 on:** July 23, 2006, 09:02:10 PM »

Quote from: cbjunkie on July 23, 2006, 08:28:21 PM

only from the best movie of all time - cool hand luke...

50 eggs!

You got it!

Paul Newman's one of the best in my book!

He kept breaking out and they kept bringing him back. Now, if he'd of had a SOHC4 to make his get-a-way, they'd never have caught him.

Later on, Bill

techy5025 · « **Reply #59 on:** July 23, 2006, 11:48:08 PM »

I see lots of posts of beautifully polished parts, polishing wheels, motors to spin them,
descriptions of various polishing compounds or bars, but nowhere is the procedure for
getting the compound on the wheel explained although the technique of polishing was
touched on in this thread. How does one get a dry polishing compound to stick to a
cloth polishing wheel.

Does one spin the wheel over the bar, douse the wheel with the liquid stuff, put the
stuff on the object to be polished and apply a clean wheel to it, or............??

I realise that this is similar to the question about how do you kickstart a bike, but forgive
me for my ignorance.

Jim

Ricky_Racer · « **Reply #60 on:** July 24, 2006, 02:03:31 AM »

Jim, the method I like is to use a spray mister and shoot a very light coat of water on the face of the buff. Then you hold the stick to the running buff until you have an even color on the cloth. Voila, you're ready to rock! Happy buffing.

GeoffT · « **Reply #61 on:** July 24, 2006, 04:14:07 AM »

Don't know how I missed this post before. Excellant work Raul.
I'll certainly be returning to this post to use the tips. Gotta get me a dremmel!!!

Cheers

techy5025 · « **Reply #62 on:** July 24, 2006, 12:10:17 PM »

Ricky,

Thanks for the tip...maybe I'll have better luck next time.

For sanding purposes, I wish they would make a tool (air or electric)
thay has the spinning head 45 degrees to the body. The spinning pad
should be about 2 to 3 inches in diameter and the pads should stick
with something similar to velcro.

I have yet to find pads that attach like this in the 300 and up range.

Jim

clarkjh · « **Reply #63 on:** July 24, 2006, 01:42:24 PM »

Techy

Try here, I use both the 2 and 3 inch pads up to 2000 grit for my woodturning.

http://store.sandpaper.ca/catalogue/default.php

James

g8ts · « **Reply #64 on:** July 24, 2006, 06:11:50 PM »

Quote from: g8ts on July 23, 2006, 02:13:24 PM

As long as your on the subject of cleaning. You have to check this product out. Its the highend waxes they use on boats. Nice stuff...(no I don't work for them just found there sight this summer when I was looking for car waxes. Was awesome on my bike too...Checkout there how to section

Sorry forgot link here it is http://www.hammerheadboatworks.com/frenzy__products.html

techy5025 · « **Reply #65 on:** July 24, 2006, 06:46:13 PM »

Wow...Thanks James, that is exactly what I was looking for and they have the
arbors to go with them. Hard to find the small grid stuff. I will place an order
tonight.

Jim

78 k550 · « **Reply #66 on:** July 26, 2006, 09:41:01 AM »

Hey All,
I did these last night. These are some extra lowers I had for the 500/550. I think I'm going to put them on ebay and see what they bring.

Paul

puppytrax · « **Reply #67 on:** July 26, 2006, 09:48:38 AM »

Quote from: 78 k550 on July 26, 2006, 09:41:01 AM

I did these last night. These are some extra lowers I had for the 500/550. I think I'm going to put them on ebay and see what they bring.

Wow!!!

Absolutely fabulous!!!

What rouge did you use??? And from whom??? And what surface preparation???

I just stripped the clearcoat off my CB500 lower; was getting ready to try different color rouges...but I'll wait until I read your reply now...

78 k550 · « **Reply #68 on:** July 26, 2006, 09:55:24 AM »

Took off the clear coat with 400 then 600 then 1200. All wet sanded. Then I used auto rubbing compound then Mothers Mag and aluminum cleaner. The came out really nice other than the deep nick's in the forks. This was done by hand. I think I'm hitting the store for some power tools. Much easier on the hand and fingers.

Paul

mrbreeze · « **Reply #69 on:** July 26, 2006, 08:03:09 PM »

Yeah Paul....those forks are lookin' good!!! I'm going to do mine this winter when I go through the whole front end.

bill440cars · « **Reply #70 on:** July 26, 2006, 09:17:02 PM »

Paul, If I can get anywhere near the results that you have, I'll be pleased. Yours are really awesome looking. Later on, Bill

hondachopproject · « **Reply #71 on:** September 10, 2006, 07:03:08 PM »

I know this is an old topic but,
I have been jumping into shining of my parts. I have been reading all that I can find on this subject.
My question is how do you preserve the shine? How long does it last?
I had clean one of my cases last winter, the pices has turned dull, dirty looking.
Thanks,
Lee
P.S. Great Job Raul

Roach Carver · « **Reply #72 on:** September 10, 2006, 07:10:22 PM »

i am no expert, but i polished a bike frame once and then cleared. the clearcoat flaked off. I think you are better off just repolishing as it gets dull if that is the look that you are after. As far as how long it lasts i would think it would be related to the humidity maybe? I think best bet is to pollish and then cover it with a quality wax. my 2 cents.

cben750f0 · « **Reply #73 on:** September 10, 2006, 11:28:44 PM »

all the polished stuff on the F1, was clear coated with a heat resistant clear, and baked for 40 mine..... and its been like that for the last two years without a prob.....

hope this helps... peace

Raul CB750K1 · « **Reply #74 on:** September 11, 2006, 12:06:40 AM »

I don't plan to use any lacquer or anything. Just a cleaning product as Nev'r dull or autosol or the like, and if it gets dull then so be it. I rather spend my time riding than cleaning. Even if it gets dull and it is an uniform dull it will work for me.

BTW, I polished the parts last december and they are still in the box waiting for reassembly. The engine is rebuilt but I used another covers just in case they get scratched when putting the engine back. From october first I will have a lot of spare time and then I will face the resto finish.

Raul

News:

Author Topic: My experience with parts polishing (pictures attached) (Read 11680 times)

einsteingarage