Author Topic: Project Frankenstuffs bike - ANTI CAFE BASTARD BUILD PARTS FOR SALE (Read 64564 times)

Zaipai · « **Reply #150 on:** December 20, 2010, 07:21:16 AM »

The great part is you are at a point you can still change directions.. Regroup and start fresh.

.: Scott :.

Tintop · « **Reply #151 on:** December 20, 2010, 07:53:53 AM »

What happened to the 'Industrial' Frankenstuff?

I hear you regarding proportions. They are a small bike, and its easy to get caught up in the bigger is better mode. Really am impressed though with your creativity, and way out of the box thinking. Glad you found your notes of the 1st original ideas, referring back to mine has helped me stay on track. This forum is just loaded with great ideas, and its easy to lose focus on your own vision. The Frankenbike is a great project.

Take a step back, enjoy the Christmas holiday.

tintop

FrankenFrankenstuff · « **Reply #152 on:** December 20, 2010, 08:34:42 PM »

Well damn boys. I am in LOVE with the Ducati wheel!! Yes that is my brake caliper in the air. (I cant afford the Ducati one)

FrankenFrankenstuff · « **Reply #153 on:** December 20, 2010, 08:38:01 PM »

This is with the wheel all the way forward in the adjusters. I am thinking about extending the swingarm, doing some sort of a double chain deal with an adjuster. dont ask

Stev-o · « **Reply #154 on:** December 20, 2010, 08:40:18 PM »

ok, wont!

Zaipai · « **Reply #155 on:** December 20, 2010, 08:42:19 PM »

Quote from: Frankenstuff on December 20, 2010, 08:34:42 PM

Yes that is my brake caliper in the air. (I cant afford the Ducati one)

Who can afford one..?

Nice I do like that setup!

.: Scott :.

FrankenFrankenstuff · « **Reply #156 on:** December 20, 2010, 08:42:49 PM »

I also added an oil sight. YOU KNOW YOU WANT TO SEE THE CLUTCH RUNNING!!!!!...but you have to wait until I get the bike ....to.....start....after....I ah um....finish making it roll kind of.

Tintop · « **Reply #157 on:** December 20, 2010, 08:56:04 PM »

You are full of neat ideas. That oil sight is very trick.

FrankenFrankenstuff · « **Reply #158 on:** December 20, 2010, 09:17:33 PM »

That is the Clutch sight....never seen one before so I made one. Here is my oil sight. Granted I dont know what is going to happen when all of that hot oil and clutch junk is sloshing. Essentially I will only see the clutch for the first fire up....then the sight will be blacked out.

Here is my oil sight.

cwchan · « **Reply #159 on:** December 20, 2010, 11:09:58 PM »

Quote from: Frankenstuff on December 20, 2010, 08:34:42 PM

Well damn boys. I am in LOVE with the Ducati wheel!! Yes that is my brake caliper in the air. (I cant afford the Ducati one)

What front wheel are you running?

HedNut · « **Reply #160 on:** December 21, 2010, 05:48:30 AM »

You sir are a magician! ahah
Love your work!!!

tweakin · « **Reply #161 on:** December 21, 2010, 05:58:24 AM »

awesome ideas and even better action.

rippy154 · « **Reply #162 on:** December 21, 2010, 02:41:01 PM »

Quote from: Frankenstuff on December 20, 2010, 08:38:01 PM

This is with the wheel all the way forward in the adjusters. I am thinking about extending the swingarm, doing some sort of a double chain deal with an adjuster. dont ask

Is the swing arm made of plastic?

Last I checked you should stay away from aluminum

rippy154 · « **Reply #163 on:** December 21, 2010, 02:43:07 PM »

Quote from: Frankenstuff on December 20, 2010, 08:34:42 PM

Well damn boys. I am in LOVE with the Ducati wheel!! Yes that is my brake caliper in the air. (I cant afford the Ducati one)

I dont like the Ducati wheel at all!!!!!! I think you should sell it to me for very cheap and I will put that ugly wheel on my bike as a favor to you of course

Lets go grab a beer soon unless you just want to hang in your basement and toss ideas around and drink

FrankenFrankenstuff · « **Reply #164 on:** December 21, 2010, 07:24:15 PM »

Quote from: tweakin on December 21, 2010, 05:58:24 AM

awesome ideas and even better action.

Thanks for that! I always say that my ideas are bigger than the outcome.

FrankenFrankenstuff · « **Reply #165 on:** December 21, 2010, 07:27:28 PM »

Quote from: rippy154 on December 21, 2010, 02:41:01 PM

Quote from: Frankenstuff on December 20, 2010, 08:38:01 PM
This is with the wheel all the way forward in the adjusters. I am thinking about extending the swingarm, doing some sort of a double chain deal with an adjuster. dont ask

Is the swing arm made of plastic? Last I checked you should stay away from aluminum

The swingarm is 100% Japanesium steel. I should not be allowed to weld anything. I destroyed the ATC fender with the plastic welder, I blew a hole in the aluminum seat cowl, and my mig work is all beef and much grind grind.

bluesmoke69 · « **Reply #166 on:** December 29, 2010, 08:24:12 PM »

It all starts with ideas some good and some bad keep up the good work.

FrankenFrankenstuff · « **Reply #167 on:** December 29, 2010, 08:41:44 PM »

Quote from: bluesmoke69 on December 29, 2010, 08:24:12 PM

It all starts with ideas some good and some bad keep up the good work.

Thanks. Yeah, it is a constantly evolving project. I change my mind about every 3 months. I waste alot of time on parts that end up being obsolete because I will swap something out.

rippy154 · « **Reply #168 on:** December 30, 2010, 02:17:39 PM »

BEER BEER BEER BEER we need to have some BEER... lets hook up and do some staring in your basement and by staring I mean drinking some beer hahaha...

Seriously though let me know if you want to get together and we can go over some things

FrankenFrankenstuff · « **Reply #169 on:** January 07, 2011, 07:13:09 AM »

I have found a guy to fix the seat cowl again. This time he is an old timer Nascar chassis builder and can fix whatever I screw up. Also starting a fiberglass cowl to copy my tank....and inquiring an alloy one as well. The bike will have at least 4 cowl setups when all said and done.

ALSO......I want my header to be "TWIXXXLER"- fied......

Really? · « **Reply #170 on:** January 07, 2011, 07:35:12 AM »

Make it more original Not Frank. Make the cowl like a trunk with a latching cover.

Sorry, thinking aloud again.

HedNut · « **Reply #171 on:** January 07, 2011, 08:21:23 AM »

Haha.... yess... your bike should have some TWIXXXLIFICATION! That would be slick'y sik ... I can feel it's need....right under my cerebellum-tubs. .... it tingles like scratchy toast.

?? don't ask... it's friday.

....yay

FrankenFrankenstuff · « **Reply #172 on:** January 08, 2011, 06:00:37 AM »

Quote from: cwchan on December 20, 2010, 11:09:58 PM

Quote from: Frankenstuff on December 20, 2010, 08:34:42 PM
Well damn boys. I am in LOVE with the Ducati wheel!! Yes that is my brake caliper in the air. (I cant afford the Ducati one)

What front wheel are you running?

The front wheel is off a Harley soft tail, roadking type. I am actually using the rear harley wheel instead of the front because the front is offset because of some gawd aweful big chrome bell on there. To use the dual disc setup I am making the rear wheel is just perfect.

FrankenFrankenstuff · « **Reply #173 on:** January 23, 2011, 07:06:20 PM »

I have decided to use a Supertrapp exhaust instead of the Yoshi that I had earlier. I really wanted to just buy the Cycle X slip on but.....$140 is a bit much for my blood.

Tintop · « **Reply #174 on:** January 23, 2011, 07:23:41 PM »

decisions, decisions.

Got the back plates Frankenstuff. Going to use the blue one. tt

News:

Author Topic: Project Frankenstuffs bike - ANTI CAFE BASTARD BUILD *PARTS FOR SALE* (Read 64564 times)

Author Topic: Project Frankenstuffs bike - ANTI CAFE BASTARD BUILD PARTS FOR SALE (Read 64564 times)