Author Topic: Kawasaki KZ400  (Read 3189 times)

0 Members and 1 Guest are viewing this topic.

Offline Cevan

  • Enthusiast
  • **
  • Posts: 114
Kawasaki KZ400
« on: November 10, 2010, 10:39:09 AM »
There is one locally for sale.  I think I could pick it up for $200-300.  It's a 1977 and looks complete from the pictures.  It hasn't run since the late 80's.  I figure I could check the compression by putting a little oil in the cylinders and kicking it over.  I'm looking for a new project after I finish restoring my CB360.  I want to do a cafe type bike.  Anyone have any info on these bikes? 

Offline betterthanurs916

  • Enthusiast
  • **
  • Posts: 105
Re: Kawasaki KZ400
« Reply #1 on: November 10, 2010, 11:16:53 AM »
No information in particular, but a little experience.

A friend of mine got one for free from his uncle years ago...and I have yet to ride a bike that was more fun than that little thing. I might have a bit of a skewed perspective on that since I was an impressionable 15 year old when I rode it...but I bought an SV650 shortly thereafter and never quite found the same joy in it.  Ultimately I bought my current CB550 and have called back some of the same feelings.

Performance? More than enough power for my 110lb 15 year old self.  It would just barely break 100mph and could manage 95 or so with my friend and I 2-up.  I remember scraping pegs a lot...but this was definitely when cornering to the limit of the old bias-plys.  The bike would pitch from side to side with minimal effort and was stable under heavy braking even with the two of us on there (my friend was probably a solid 170lbs back then)

 We beat the crap out of the poor bike (full throttle uphill for miles in the southern hills of TN, off-roading at the abandoned farm down the road, dropping it when trying to ice drift in the winter, etc.) and he never did ANY maintenance on it short of keeping air in the tires.  After 2 years and over 8,000 miles of riding hard in this manner...the chain was dead and the clutch was slipping badly but everything else was holding together like a champ despite the neglect and abuse.

I'd like to pick one up for myself someday...I'd go for it if it is mostly complete.  You're likely to not be disappointed.
1977 CB550F2

Offline Duanob

  • Bold Timer
  • Old Timer
  • ******
  • Posts: 4,009
  • Gotcha!
Re: Kawasaki KZ400
« Reply #2 on: November 10, 2010, 11:45:19 AM »
Uhh you might want to check a KZ board?
"Just because you flush a boatload of money down the toilet, doesn't make the toilet worth more",  My Stepfather the Unknown Poet

1974 CB360T
1976 CB550K2 Resurrected
1976 CB550F2 Barn Find
1979 CX500 VG "HONDA-GUZZI"
2007 Moto Guzzi Breva 750ie
2015 BMW F700GS
Another 1976 CB550K Cafe?

  __o
_- \_<,
(*) /' (*)

Offline Duke McDukiedook

  • Space Force 6 Star General
  • Really Old Timer ...
  • *******
  • Posts: 12,690
  • Wish? Did somebody say wish?
Re: Kawasaki KZ400
« Reply #3 on: November 10, 2010, 11:58:27 AM »
Or post in 'other bikes' part of the forum.
"Well, Mr. Carpetbagger. We got somethin' in this territory called the Missouri boat ride."   Josey Wales

"It's Baltimore, gentlemen. The gods will not save you." Ervin Burrell

CB750 K3 crat | (2) 1986 VFR750F

Offline Tugboat

  • Puppet
  • Master
  • *****
  • Posts: 1,778
  • '75 CB750K + '67 CL90 + '71 CT90
    • PseudoMoto
Re: Kawasaki KZ400
« Reply #4 on: November 11, 2010, 11:03:07 AM »
Here's the forum: http://www.armbell.com/kz400/index.php?mforum=kz400

My daily rider is a '76 kz400D3. I also have a '77 D4 (exact same bike except for the carbs). For $300, as long as it has compression and shifts through the gears it's worth picking up. Most parts are available, though some (carb boots, odd-sized headlight, carb diaphragms) are a #$%* to find. Plenty of info on the KZ board though. I bought mine as "cafe'd" runner for $900 I think 2 years ago. Had to put new tires, new battery, clean the carbs, new chain etc on it but it runs like a champ. Took it down to Barber this year with no problems. They tend to leak oil a little bit from the O-rings where the cylinder studs are, but other than that are solid & reliable. Good luck!

If it's worth doing, it's worth doing twice.

Offline kirkn

  • Expert
  • ****
  • Posts: 1,046
Re: Kawasaki KZ400
« Reply #5 on: November 11, 2010, 12:45:18 PM »
Tons of info and action on the KZ400 forum, as noted.

Plus, search here.  The question on KZ400s has come up before and been discussed at length.

My shortened opinion is to jump on it.  You won't be disappointed.

Good luck with it.

Kirk