« previous next »
Pages: [1]   Go Down

Author Topic: Steering bearing questions  (Read 1603 times)

0 Members and 1 Guest are viewing this topic.

Offline pidaster

  • Enthusiast
  • **
  • Posts: 183
Steering bearing questions
« on: November 26, 2010, 11:43:52 AM »
I didn't think to test out my steering bearings before putting the forks back on. They tend to want to lock when pointed straight forward. Now I've got to change them out. I looked up the All Balls but they only show K1-K5. Is there any difference in the K5 and the K6?
These are listed K5-K6 here.
https://www.allballsracing.com/index.php/ymmsearch/index/searchfromhome/

Anybody tried the steering bearings from Z1? I'm not sure what brand they are but they claim to fit the K6. http://www.z1enterprises.com/detail.aspx?ID=1503
Logged
'76 CB750K
'82 CB450SC
'06 Vulcan 900
'98 Kawasaki Police 1000
'73 CB350 twin

Offline Old Scrambler

  • My CB750K3 has been in 39 States & 5 Provinces
  • Old Timer
  • ******
  • Posts: 3,808
Re: Steering bearing questions
« Reply #1 on: November 26, 2010, 11:58:23 AM »
I don't know of any changes to the K6........All balls seem to have the best shims - washer spacers - for fit. A really great upgrade.
Logged
Dennis in Wisconsin
'64 Triumph Cub & '74 Honda CB750 Bonneville Salt Flats AMA Record Holder (6)
CB750 Classic Bonneville Racer thread - http://forums.sohc4.net/index.php/topic,135473.0.html
'63 CL72 Project(s)
'66 CL77 Red
'67 Triumph T100C
'73 750K3 Owned since New
'77 750F2 Cafe Project
2020 ROYAL ENFIELD Himalayan

Offline JS550

  • the artist formerly known as
  • Hot Shot
  • ***
  • Posts: 621
  • IAFF local 1307
Re: Steering bearing questions
« Reply #2 on: November 26, 2010, 03:00:51 PM »
I ordered mine from Z1 & they were the AllBAllz. I think the pic on thier site is just out of the pack?
Logged
If you're worried about how many calories are in beer, is losing weight really your biggest problem?

Offline shizzomynizzo

  • Hot Shot
  • ***
  • Posts: 591
  • It's 5 o'clock somewhere
Re: Steering bearing questions
« Reply #3 on: November 26, 2010, 06:19:17 PM »
Quote from: JS550 on November 26, 2010, 03:00:51 PM
I ordered mine from Z1 & they were the AllBAllz. I think the pic on thier site is just out of the pack?

I used z1 as well, part number started with an AB so I assume they were all balls I got. They went in easy and feel so much better than stock!
Logged
1974 CB550
1985 XLX Last of the IH
2001 Street Glide

rholum

  • Guest
Re: Steering bearing questions
« Reply #4 on: November 28, 2010, 12:07:35 AM »
I bought All Balls head bearings a couple of years ago for my 550 but I don't remember who I got them through. I installed them and found that the spacing wasn't even close, after tinkering with it for a little bit I found that if I left the lower race in and installed the new one over it then the spacing was right on. I haven't had any problems and they work great.
Logged
Pages: [1]   Go Up
« previous next »