Author Topic: STUCK fork seals - cb175  (Read 1453 times)

0 Members and 1 Guest are viewing this topic.

Offline catzor

  • Full Member
  • *
  • Posts: 42
STUCK fork seals - cb175
« on: December 12, 2010, 05:41:54 PM »
I have my forks fully diassembled and I can't get the damn seals out. I've heard of people filling them with water and compressing them, forcing the seal out, but I've already molested one of mine trying to get it out so that isn't going to work. I can get a good grip on it with some needle-nose pliers, but I'm just pulling out chunks of rubber. It won't budge. :-[  

So what's next? I hope there's a less primitive way to get this done... ???
1991 CB250 Nighthawk
1986 VT500C
1989 EX500
1973 CB175 Super Sport

Offline jakecb420

  • Enthusiast
  • **
  • Posts: 211
Re: STUCK fork seals - cb175
« Reply #1 on: December 12, 2010, 05:58:16 PM »
maybe try heating up the outside of the fork lower. i use a heat gun for this. then try whatever method you use to get them buggers out. just try to be careful not to scratch the lowers up too much.
750K3 daily driver
76 750F project
74 CB450 donor
79 50cc honda express 2 moped
73 cb500-4
http://forums.sohc4.net/index.php?topic=73724.0

Offline Alan F.

  • We remember the Night Rider, and we know who you are.
  • Really Old Timer ...
  • *******
  • Posts: 7,348
Re: STUCK fork seals - cb175
« Reply #2 on: December 13, 2010, 06:33:51 AM »
Run a search of the sohc4 bikes section, you'll find lots fo good tips there.