« previous next »
Pages: [1]   Go Down

Author Topic: CB750 K1 valve wear at end with pics  (Read 1027 times)

0 Members and 1 Guest are viewing this topic.

Offline Ace

  • Hot Shot
  • ***
  • Posts: 336
CB750 K1 valve wear at end with pics
« on: January 12, 2011, 04:42:32 AM »
Upon stripping down the K1, I noticed that the end of the valve where the tappet adjuster strikes has pits in it.  Are the valves still good or should they be replaced?  Thanks.
Logged
1971 CB750 K1 - Sold
1978 CB750 F2 Supersport - Sold
1981 CB900 Bol d'or - Sold
2006 CBR1100 XX Super Blackbird - Sold

Offline KRONUS0100

  • MAD MATT THE MANIAC
  • Expert
  • ****
  • Posts: 1,216
Re: CB750 K1 valve wear at end with pics
« Reply #1 on: January 12, 2011, 05:55:23 AM »
id say the top picture looks like it was run forever with excessive clearance.  looks like the rocker arm adjuster screww been slamming down on it a little much.  the bottom valve looks ok.
Logged
MATT
current bikes:  1976 CB750F, 1981 GS1100E
bikes owned:1981 GL1100I, 1990 GS500E, 1981 GS850, 1977 and 1979 GS750, 1974 CB750, 1975 CB750, and a 1982 GS750E
Pages: [1]   Go Up
« previous next »