Author Topic: Wiring Harness location  (Read 590 times)

0 Members and 1 Guest are viewing this topic.

Offline Grabcon

  • Hot Shot
  • ***
  • Posts: 354
Wiring Harness location
« on: February 18, 2011, 07:06:26 PM »
I got a 1974 CB750. This bike has sat around awhile before I got it and from what I see it looks like someone has done some rerouting of the wiring harness. It is in tack and in good condition so I am keeping it. But what I would like to have is a few good photos that shows how the harness is run from the battery toward the neck of the bike. Mines seems to interfer with the top side of the carbs and are very tight around the coils.

Also If I could get a good photo of the left side of the bike under the side cover. This is where the fuse block, solenoid and rectifier are. I need to see how things are placed and how the wire s are run.

Thanks in advance for the help.
CB750   1974 - Gone
CB750F 1976 - Gone :(
CB550   1978 - Gone & now back
CB900F 1981 - Gone
ST1100 1991 - Gone
ST1100 2000 - Gone
VFR800 2008 - Gone
ST1300 2008 - Gone
BMW F700GS - Wife's
VFR1200X 2016 - Mine

bollingball

  • Guest
Re: Wiring Harness location
« Reply #1 on: February 18, 2011, 07:56:53 PM »
The pictures you need are in fact in the service manual :)

Offline Grabcon

  • Hot Shot
  • ***
  • Posts: 354
Re: Wiring Harness location
« Reply #2 on: February 18, 2011, 08:53:58 PM »
thanks found it
CB750   1974 - Gone
CB750F 1976 - Gone :(
CB550   1978 - Gone & now back
CB900F 1981 - Gone
ST1100 1991 - Gone
ST1100 2000 - Gone
VFR800 2008 - Gone
ST1300 2008 - Gone
BMW F700GS - Wife's
VFR1200X 2016 - Mine