« previous next »
Pages: [1]   Go Down

Author Topic: .45 shell casing for cracking main jet tower  (Read 4350 times)

0 Members and 1 Guest are viewing this topic.

Offline drrice

  • I Choose To Exist
  • Full Member
  • *
  • Posts: 25
.45 shell casing for cracking main jet tower
« on: December 28, 2011, 06:49:57 pm »
My main jet tower was cracking and was told about the .45 shell casing trick.

Well I thought I'd post up an easy way on how to cut the shell casing. All you need is a vice, bolt, and a hacksaw.










There was carbon build up inside the casing.


After some 80 grit sand paper


600 grit
« Last Edit: December 29, 2011, 07:29:31 pm by drrice »
Logged

Offline Hon3ybadger

  • Enthusiast
  • **
  • Posts: 156
  • Someday it will run...
Re: .45 shell casing for cracking main jet tower
« Reply #1 on: March 05, 2014, 05:10:04 am »
I always knew my 1911 and my 750 had something in common. lol
Logged

Offline dusterdude

  • Really Old Timer ...
  • *******
  • Posts: 8,437
Re: .45 shell casing for cracking main jet tower
« Reply #2 on: March 05, 2014, 09:45:15 am »
Cool


Sent from my iPhone using Tapatalk
Logged
mark
1972 k1 750
1949 fl panhead
1 1/2 gl1100 goldwings
1998 cbr600 f3

Offline TwoTired

  • Really Old Timer ...
  • *******
  • Posts: 21,805
Re: .45 shell casing for cracking main jet tower
« Reply #3 on: March 05, 2014, 09:46:27 am »
The apocalypse is upon us already?
Logged
Lloyd... (SOHC4 #11 Original Mail List)
72 500, 74 550, 75 550K, 75 550F, 76 550F, 77 550F X2, 78 550K, 77 750F X2, 78 750F, 79CX500, 85 700SC, GL1100

Those that learn from history are doomed to repeat it by those that don't learn from history.
Pages: [1]   Go Up
« previous next »