« previous next »
Pages: [1]   Go Down

Author Topic: swingarm bushing removal question  (Read 2532 times)

0 Members and 1 Guest are viewing this topic.

Offline DavePhipps

  • Expert
  • ****
  • Posts: 1,150
  • Reading the entire Hi-Perf forum
    • Hillside Technology
swingarm bushing removal question
« on: March 24, 2012, 08:08:00 PM »
I've got a load of play in my swingarm so I decided to relplace the bushings. When taking the swingarm apart I found metal bushing already in there. I've read about using a hacksaw but was wondering if in this case a pilot bearing remover might be a better tool for the job?
Logged
Bikes:
90 FZR600 RA
74 CB550k
78 GL1000
72 CB500K

Offline Terry in Australia

  • Really Old Timer ...
  • *******
  • Posts: 33,333
  • So, what do ya wanna talk about today?
Re: swingarm bushing removal question
« Reply #1 on: March 24, 2012, 08:11:19 PM »
Yeah mate, use whatever you have available, keeping in mind that the bearing was pressed in originally, and will have rusted in place. Cheers, Terry. ;D
Logged
I was feeling sorry for myself because I couldn't afford new bike boots, until I met a man with no legs.

So I said, "Hey mate, you haven't got any bike boots you don't need, do you?"

"Crazy is a very misunderstood term, it's a fine line that some of us can lean over and still keep our balance" (thanks RB550Four)

Offline DavePhipps

  • Expert
  • ****
  • Posts: 1,150
  • Reading the entire Hi-Perf forum
    • Hillside Technology
Re: swingarm bushing removal question
« Reply #2 on: March 24, 2012, 08:14:20 PM »
Quote from: Terry in Australia on March 24, 2012, 08:11:19 PM
Yeah mate, use whatever you have available, keeping in mind that the bearing was pressed in originally, and will have rusted in place. Cheers, Terry. ;D
You give such heartening news :P
I don't have a puller yet bet I'm tempted to buy one for this
Logged
Bikes:
90 FZR600 RA
74 CB550k
78 GL1000
72 CB500K

Offline Terry in Australia

  • Really Old Timer ...
  • *******
  • Posts: 33,333
  • So, what do ya wanna talk about today?
Re: swingarm bushing removal question
« Reply #3 on: March 24, 2012, 11:33:36 PM »
Quote from: DavePhipps on March 24, 2012, 08:14:20 PM
Quote from: Terry in Australia on March 24, 2012, 08:11:19 PM
Yeah mate, use whatever you have available, keeping in mind that the bearing was pressed in originally, and will have rusted in place. Cheers, Terry. ;D
You give such heartening news :P
I don't have a puller yet bet I'm tempted to buy one for this

Ha ha, I don't mean to be the bearer of bad news Dave, but I've never met a 40 year old swingarm bush that came out without a fight. By contrast, wheel nearings and steering head bearings are a snap to R&R compared to swingarm bushes, probably because the swingarm bushes have 3-4 times the surface area. Have fun! ;D
Logged
I was feeling sorry for myself because I couldn't afford new bike boots, until I met a man with no legs.

So I said, "Hey mate, you haven't got any bike boots you don't need, do you?"

"Crazy is a very misunderstood term, it's a fine line that some of us can lean over and still keep our balance" (thanks RB550Four)

Offline DavePhipps

  • Expert
  • ****
  • Posts: 1,150
  • Reading the entire Hi-Perf forum
    • Hillside Technology
Re: swingarm bushing removal question
« Reply #4 on: March 25, 2012, 02:55:57 PM »
OK, I went to the local auto parts store and rented a blind hole puller. Olb bushings were out in about 5 minutes :)
Logged
Bikes:
90 FZR600 RA
74 CB550k
78 GL1000
72 CB500K

Offline Terry in Australia

  • Really Old Timer ...
  • *******
  • Posts: 33,333
  • So, what do ya wanna talk about today?
Re: swingarm bushing removal question
« Reply #5 on: March 26, 2012, 12:45:09 AM »
Well done mate, was it a slide-hammer type puller, or a threaded puller? Cheers, Terry. ;S
Logged
I was feeling sorry for myself because I couldn't afford new bike boots, until I met a man with no legs.

So I said, "Hey mate, you haven't got any bike boots you don't need, do you?"

"Crazy is a very misunderstood term, it's a fine line that some of us can lean over and still keep our balance" (thanks RB550Four)

Offline Duke McDukiedook

  • Space Force 6 Star General
  • Really Old Timer ...
  • *******
  • Posts: 12,690
  • Wish? Did somebody say wish?
Re: swingarm bushing removal question
« Reply #6 on: March 26, 2012, 08:25:02 AM »
Harbor Freight scored me a cheapy puller for my wheel bearings when I got the one set powder coated. I think less than $50US.
Logged
"Well, Mr. Carpetbagger. We got somethin' in this territory called the Missouri boat ride."   Josey Wales

"It's Baltimore, gentlemen. The gods will not save you." Ervin Burrell

CB750 K3 crat | (2) 1986 VFR750F

Offline DavePhipps

  • Expert
  • ****
  • Posts: 1,150
  • Reading the entire Hi-Perf forum
    • Hillside Technology
Re: swingarm bushing removal question
« Reply #7 on: March 26, 2012, 12:28:55 PM »
It was a slide hammer type with expandable collets. The collets scewed onto the end of the slida hammer Much less scary than using a hachsaw on my swingarm. Would work great with many bearings.
Similar to this one.
Logged
Bikes:
90 FZR600 RA
74 CB550k
78 GL1000
72 CB500K

Offline Terry in Australia

  • Really Old Timer ...
  • *******
  • Posts: 33,333
  • So, what do ya wanna talk about today?
Re: swingarm bushing removal question
« Reply #8 on: March 27, 2012, 01:22:50 AM »
Nice, I want one. Cheers, Terry. ;D
Logged
I was feeling sorry for myself because I couldn't afford new bike boots, until I met a man with no legs.

So I said, "Hey mate, you haven't got any bike boots you don't need, do you?"

"Crazy is a very misunderstood term, it's a fine line that some of us can lean over and still keep our balance" (thanks RB550Four)
Pages: [1]   Go Up
« previous next »