« previous next »
Pages: [1] 2  All   Go Down

Author Topic: Stroker options  (Read 5368 times)

0 Members and 4 Guests are viewing this topic.

Offline afkrejci90

  • Enthusiast
  • **
  • Posts: 192
Stroker options
« on: June 10, 2012, 09:25:32 PM »
This has probably been discussed but I can't find anything that relates to my exact model.  I looked up to see what the cost would be to make my 78 750 crank into a stroker and it's close to $1100.  Are there any alternatives like using a crank from a different engine that won't put a hole in my wallet? 
Logged
'78 CB750K http://forums.sohc4.net/index.php?topic=105327.0
'80 CB750C - Sold
'06 CBR600RR

Offline Retro Rocket

  • Eggs are hard due too a
  • Really Old Timer ...
  • *******
  • Posts: 19,279
  • ROCK & ROLL
Re: Stroker options
« Reply #1 on: June 10, 2012, 10:10:13 PM »
I know that 900 Honda cranks {DOHC} get used i these engines but i don't know a great deal about it....  I think it would still work out expensive because the 900's use a Hyvo chain set up...
Logged
750 K2 1000cc
750 F1 970cc
750 Bitsa 900cc
If You can't fix it with a hammer, You've got an electrical problem.

Offline BLUE71TURBO

  • Master
  • *****
  • Posts: 1,849
Re: Stroker options
« Reply #2 on: June 10, 2012, 10:16:56 PM »
 Either way it's gonna be expensive $$$$ ! !   Modified crankshaft + pistons + rods = $$$$$ !   :o   :(  :'( :'( :'(
Logged
Remember; Before you can be old and wise, you must first be young and stupid !

Offline bear

  • Vale Bill McIntosh ......"illegitimi non carborundum"
  • Old Timer
  • ******
  • Posts: 2,575
  • Leeton in Australia
Re: Stroker options
« Reply #3 on: June 11, 2012, 04:15:26 AM »
Logged
The older I get the faster I was.

Offline mec

  • Hot Shot
  • ***
  • Posts: 503
Re: Stroker options
« Reply #4 on: June 11, 2012, 04:21:20 AM »
Logged
Honda Monkey
Takeuchi TB 070
Massey Ferguson

Offline bear

  • Vale Bill McIntosh ......"illegitimi non carborundum"
  • Old Timer
  • ******
  • Posts: 2,575
  • Leeton in Australia
Re: Stroker options
« Reply #5 on: June 11, 2012, 04:26:14 AM »
+6mm from memory Mec.
I'm happy to be corrected.

Cheers,
Brian
Logged
The older I get the faster I was.

Offline mec

  • Hot Shot
  • ***
  • Posts: 503
Re: Stroker options
« Reply #6 on: June 11, 2012, 04:29:46 AM »
i always thought the same stroke as standard 750 but with hivo primary chain.
dohc 900 has +5mm (69mm instead of 64mm), hivo primary as hivo camchain.

mec
Logged
Honda Monkey
Takeuchi TB 070
Massey Ferguson

Offline bear

  • Vale Bill McIntosh ......"illegitimi non carborundum"
  • Old Timer
  • ******
  • Posts: 2,575
  • Leeton in Australia
Re: Stroker options
« Reply #7 on: June 11, 2012, 05:18:15 AM »
Quote from: mec on June 11, 2012, 04:29:46 AM
i always thought the same stroke as standard 750 but with hivo primary chain.
dohc 900 has +5mm (69mm instead of 64mm), hivo primary as hivo camchain.

mec

Your right Mec.
I just checked it out. The auto does indeed have the same stroke as other SOHC's, @ 63mm I think.
I stand corrected. :-[

Cheers,
Brian
Logged
The older I get the faster I was.

Offline bear

  • Vale Bill McIntosh ......"illegitimi non carborundum"
  • Old Timer
  • ******
  • Posts: 2,575
  • Leeton in Australia
Re: Stroker options
« Reply #8 on: June 11, 2012, 05:20:32 AM »
Quote from: mec on June 11, 2012, 04:29:46 AM
i always thought the same stroke as standard 750 but with hivo primary chain.
dohc 900 has +5mm (69mm instead of 64mm), hivo primary as hivo camchain.

mec

Your right Mec.
I just checked it out. The auto does indeed have the same stroke as other SOHC's, @ 63mm I think.
I stand corrected.

Cheers,
Brian
Logged
The older I get the faster I was.

Offline bear

  • Vale Bill McIntosh ......"illegitimi non carborundum"
  • Old Timer
  • ******
  • Posts: 2,575
  • Leeton in Australia
Re: Stroker options
« Reply #9 on: June 11, 2012, 05:21:50 AM »
Bloody hell I'm stuttering again.

Cheers,
Brian
Logged
The older I get the faster I was.

Offline mec

  • Hot Shot
  • ***
  • Posts: 503
Re: Stroker options
« Reply #10 on: June 11, 2012, 05:45:59 AM »
Quote from: bear on June 11, 2012, 05:20:32 AM
Quote from: mec on June 11, 2012, 04:29:46 AM
i always thought the same stroke as standard 750 but with hivo primary chain.
dohc 900 has +5mm (69mm instead of 64mm), hivo primary as hivo camchain.

mec

 63mm I think.

Cheers,
Brian

:):):) 64mm. originally our sohc was a long stroke engine with 64 stroke and 63 bore.
all the racers made a "quadratical" engine with 64x64 or short stroker with 64x65bore out of it.

mec
Logged
Honda Monkey
Takeuchi TB 070
Massey Ferguson

Offline afkrejci90

  • Enthusiast
  • **
  • Posts: 192
Re: Stroker options
« Reply #11 on: June 11, 2012, 08:35:34 AM »
Quote from: mec on June 11, 2012, 04:29:46 AM
i always thought the same stroke as standard 750 but with hivo primary chain.
dohc 900 has +5mm (69mm instead of 64mm), hivo primary as hivo camchain.

mec
Theres alot of mods to do going this route especially since I would need HiVo chains.  At that point getting one made might be the easier option.
Logged
'78 CB750K http://forums.sohc4.net/index.php?topic=105327.0
'80 CB750C - Sold
'06 CBR600RR

Offline kmb69

  • Master
  • *****
  • Posts: 2,041
Re: Stroker options
« Reply #12 on: June 11, 2012, 09:56:58 AM »
((PI x (Radius x Radius)) x Stroke) x Cylinders = Displacement

A stock Honda SOHC 750 is 61mm bore x 63mm stroke x 4 cyls = 736cc.
A stock Honda DOHC 750 is 62mm bore x 62mm stroke x 4 cyls = 748cc.

63mm bore x 64mm stroke x 4 cyls = 798cc
64mm bore x 64mm stroke x 4 cyls = 823cc
65mm bore x 64mm stroke x 4 cyls = 849cc
Logged

Offline mec

  • Hot Shot
  • ***
  • Posts: 503
Re: Stroker options
« Reply #13 on: June 11, 2012, 11:55:47 AM »
thx to kmb69!

sorry guys, in my prevoius post i mixed some numbers :(
have to check the pills I swallow :)

mec
Logged
Honda Monkey
Takeuchi TB 070
Massey Ferguson

Offline Sam Green Racing

  • Moderator
  • Really Old Timer ...
  • *****
  • Posts: 16,068
  • I REALLY? hate black rims.
Re: Stroker options
« Reply #14 on: June 11, 2012, 12:23:56 PM »
All the CB750 SOHC4s are 61 bore x 63 stroke = 736557.04cc.

Sam. ;)
Logged
C95 sprint bike.
CB95 hybrid race bike
CB95 race bike
CB92
RS 175. sprint/land speed bike
JMR Racing CB750A street ET drag bike

Offline kmb69

  • Master
  • *****
  • Posts: 2,041
Re: Stroker options
« Reply #15 on: June 11, 2012, 08:42:34 PM »
Was using shorthand.  ;)

I didn't show the conversion from cubic millimeter to cubic centimeter. Divide by 1000.
« Last Edit: June 11, 2012, 08:45:19 PM by kmb69 »
Logged

Offline bear

  • Vale Bill McIntosh ......"illegitimi non carborundum"
  • Old Timer
  • ******
  • Posts: 2,575
  • Leeton in Australia
Re: Stroker options
« Reply #16 on: June 11, 2012, 10:23:56 PM »
Quote from: SamCR750A on June 11, 2012, 12:23:56 PM
All the CB750 SOHC4s are 61 bore x 63 stroke = 736557.04cc.

Sam. ;)

Not mine! ;D ;D ;D

Cheers,
Brian
Logged
The older I get the faster I was.

Offline Sam Green Racing

  • Moderator
  • Really Old Timer ...
  • *****
  • Posts: 16,068
  • I REALLY? hate black rims.
Re: Stroker options
« Reply #17 on: June 11, 2012, 11:10:17 PM »
Yes Brian but when you make them that big, they become unmanageable. ;D ;D ;D ;D ;D ;D ;D

Sam. ;) ::)
Logged
C95 sprint bike.
CB95 hybrid race bike
CB95 race bike
CB92
RS 175. sprint/land speed bike
JMR Racing CB750A street ET drag bike

Offline bear

  • Vale Bill McIntosh ......"illegitimi non carborundum"
  • Old Timer
  • ******
  • Posts: 2,575
  • Leeton in Australia
Re: Stroker options
« Reply #18 on: June 11, 2012, 11:43:43 PM »
Quote from: SamCR750A on June 11, 2012, 11:10:17 PM
Yes Brian but when you make them that big, they become unmanageable. ;D ;D ;D ;D ;D ;D ;D

Sam. ;) ::)

It wasn't the motor Sammy.
It was the loose nut on the handle bars.

Oh......and by the the by, after three weeks in an induced coma, another three weeks in ICU and five months in rehab I'm walking out of here on Friday!!!!!!!!  (if I pass my nuro syc test) :o

                                               THANK'S TO YOU ALL
                                   :) :) :) :) :) :) :) :) :) :) :) :) :) :) :)
                         
Cheers,
Brian




Logged
The older I get the faster I was.

Offline Sam Green Racing

  • Moderator
  • Really Old Timer ...
  • *****
  • Posts: 16,068
  • I REALLY? hate black rims.
Re: Stroker options
« Reply #19 on: June 12, 2012, 12:45:50 AM »
Great news Brian, good on ya. 8) 8) 8) 8) 8) 8) 8)

Sam. ;)
Logged
C95 sprint bike.
CB95 hybrid race bike
CB95 race bike
CB92
RS 175. sprint/land speed bike
JMR Racing CB750A street ET drag bike

Offline Retro Rocket

  • Eggs are hard due too a
  • Really Old Timer ...
  • *******
  • Posts: 19,279
  • ROCK & ROLL
Re: Stroker options
« Reply #20 on: June 12, 2012, 02:00:19 AM »
Quote from: SamCR750A on June 12, 2012, 12:45:50 AM
Great news Brian, good on ya. 8) 8) 8) 8) 8) 8) 8)

Sam. ;)

+1000000000000000
Logged
750 K2 1000cc
750 F1 970cc
750 Bitsa 900cc
If You can't fix it with a hammer, You've got an electrical problem.

Offline bear

  • Vale Bill McIntosh ......"illegitimi non carborundum"
  • Old Timer
  • ******
  • Posts: 2,575
  • Leeton in Australia
Re: Stroker options
« Reply #21 on: June 12, 2012, 02:19:04 AM »
Quote from: Retro Rocket on June 12, 2012, 02:00:19 AM
Quote from: SamCR750A on June 12, 2012, 12:45:50 AM
Great news Brian, good on ya. 8) 8) 8) 8) 8) 8) 8)

Sam. ;)

+1000000000000000

Thanks mate  :)
Sorry for the hyjack kmb.

Cheers,
Brian
Logged
The older I get the faster I was.

Offline Sam Green Racing

  • Moderator
  • Really Old Timer ...
  • *****
  • Posts: 16,068
  • I REALLY? hate black rims.
Re: Stroker options
« Reply #22 on: June 12, 2012, 02:32:39 AM »
Good news like that should be hyjacked into every thread. 8) 8) 8) 8) 8)
Logged
C95 sprint bike.
CB95 hybrid race bike
CB95 race bike
CB92
RS 175. sprint/land speed bike
JMR Racing CB750A street ET drag bike

Offline jweeks

  • Hot Shot
  • ***
  • Posts: 545
Re: Stroker options
« Reply #23 on: June 12, 2012, 04:18:21 AM »
5 mm increase on the stock 750 crank was the limit to oil the bearings where the oil hole is no longer centered. The 900F cranks (US) are heavier and require mild clearancing to the main webs to drop in. To run in a clutch bike, you'll use early Gold Wing clutch parts attached to the 900F primary chain. The 900F crank ends were set up opposite the SOHC 750's, so you have to cut off the snout on one end and machine it for your points plate. The other end is tapped, but I haven't yet heard of anyone connecting starter gear to it. I run one with an external starter. The cam chain is also different between the two. I run a 3 mm spacer below the sleeves for that crank. I put mine in for less than $1,100, but I am racing an automatic.
Almost forgot the primary chain tensioner which must be added for street use. I don't believe that +6 mm is the limit in the 750 case. Big Jim can stroke the 900F cranks as well. (I asked him at Valdosta) ;)

                                                                       Jon Weeks
Logged

Offline bear

  • Vale Bill McIntosh ......"illegitimi non carborundum"
  • Old Timer
  • ******
  • Posts: 2,575
  • Leeton in Australia
Re: Stroker options
« Reply #24 on: June 12, 2012, 10:58:24 AM »
Quote from: JWEEKS on June 12, 2012, 04:18:21 AM
Almost forgot the primary chain tensioner which must be added for street use. I don't believe that +6 mm is the limit in the 750 case.

We start running into clearance problems with the bottom crankcase from memory.
Some of the pics I'm trying to sort out for Alex.
Logged
The older I get the faster I was.
Pages: [1] 2  All   Go Up
« previous next »