Author Topic: drouin supercharger availability? (Read 10423 times)

cben750f0 · « **on:** November 19, 2012, 05:23:10 AM »

gday guys, long time not chat, but was wondering what a drouin supercharger would cost, were could i get one etc.

any help would be great

peace

SOHC Digger · « **Reply #1 on:** November 19, 2012, 07:07:13 AM »

They seem to be unobtanium. I would expect a complete set-up to fetch at least $1500. I may be way off, but it's rare to see these things pop up for sale here, on ebay, or anywhere. That being said, it's worth how badly you want it.

Sam Green Racing · « **Reply #2 on:** November 19, 2012, 07:15:56 AM »

How about a new one Ben. I can't remember the name but there is a company that makes small superchargers that don't cost the earth.

Sam.

Tintop · « **Reply #3 on:** November 19, 2012, 11:17:56 AM »

Are you referring to Rotrex Sam??

http://www.rotrexsuperchargers.co.uk/Rotrex/index.htm

BLUE71TURBO · « **Reply #4 on:** November 19, 2012, 12:13:09 PM »

Quote from: Tintop on November 19, 2012, 11:17:56 AM

Are you referring to Rotrex Sam??

http://www.rotrexsuperchargers.co.uk/Rotrex/index.htm

$ 6522.00 !!!

OH HELL NO !! Try talking to these people....... http://www.fageolsuperchargers.com/

Sam Green Racing · « **Reply #5 on:** November 19, 2012, 12:41:27 PM »

Quote from: Tintop on November 19, 2012, 11:17:56 AM

Are you referring to Rotrex Sam??

http://www.rotrexsuperchargers.co.uk/Rotrex/index.htm

I think it was American Brian.

Sam.

Bill/BentON Racing · « **Reply #6 on:** November 19, 2012, 01:40:19 PM »

My Drouin in '77 or'78 cost 450.00 + shipping!!!

Could have bought a NOS one in 82 for $200.00.Damn,sure wish I had it now!!

Tintop · « **Reply #7 on:** November 19, 2012, 01:43:11 PM »

I think the Fageol is what was used on the randakk wing setup. Would not be the easiest packaging job on an SOHC, but would look trick.

cben750f0 · « **Reply #8 on:** November 19, 2012, 03:35:59 PM »

thanks heaps for the reply, i have a REAL hankering for one of the drouin set ups, and have been trolling around all over the place looking for a set up. then i thought why not ask here.

you guys rock... will just have too keep a lookout..

peace

754 · « **Reply #9 on:** November 19, 2012, 11:13:07 PM »

Bet you never find Drouin and reliable setup in the same sentence...

jaguar · « **Reply #10 on:** November 21, 2012, 04:22:17 PM »

Carpy had one that he was selling, seem to remember some where in the $3500 range. I would assume given some time there is someone out there that will pay that.....

Super long time since I have seen a complete set up for sale though.
RickyRacer here has one or two (Ted beat me to the punch on the last one I saw.....lol)
Last time I talked to him he was debating on spending a small fortune to have bearings made or something for it?
I have not heard of many people even back in the day that had much luck with them, but the bad ass factor is kinda huge with them now.

scunny · « **Reply #11 on:** November 21, 2012, 10:08:57 PM »

Quote from: jaguar on November 21, 2012, 04:22:17 PM

but the bad ass factor is kinda huge with them now.

that is worth a lot, not everything is functional or reliable, but if it brings a smile to your dial, who cares.

BLUE71TURBO · « **Reply #12 on:** November 21, 2012, 11:43:10 PM »

Quote from: scunny on November 21, 2012, 10:08:57 PM

Quote from: jaguar on November 21, 2012, 04:22:17 PM
but the bad ass factor is kinda huge with them now.
that is worth a lot, not everything is functional or reliable, but if it brings a smile to your dial, who cares.

1,000 % CORRECT !!

I always catch flak for using a A.R.D. magneto's on my bikes. Yea, modern electronics
work great but the A.R.D. CDM mags work great and look way cooler than modern ignitions.

Red Good · « **Reply #13 on:** March 02, 2013, 11:35:59 AM »

Buddy bought a chopper project in Kansas and there was a new drouin in the parts boxes with all the other stuff . No he won't sell it either .

Bill/BentON Racing · « **Reply #14 on:** March 02, 2013, 11:46:34 AM »

Quote from: 754 on November 19, 2012, 11:13:07 PM

Bet you never find Drouin and reliable setup in the same sentence...

Ran mine two years, compression went down 30 psi at the end.Loved it, but yes had 40+ hours in making it reliable! Bill

BLUE71TURBO · « **Reply #15 on:** March 02, 2013, 03:07:57 PM »

Now if i just could figure out how to make this Magnacharger 220 unit work on a motorcycle !

Retro Rocket · « **Reply #16 on:** March 02, 2013, 03:17:42 PM »

Your slipping Jon, Go see Russ and get the drawings for the Sorcerer...

Ricky_Racer · « **Reply #17 on:** March 02, 2013, 06:10:37 PM »

I recently sold my Magnacharger 110 with single-port Hilburn to a fellow who was planning on running it between two Triumph engines on a drag bike. However, I do have a complete Drouin kit available. The last one I remember on eBay was Carpy's and it sold on a Buy-It-Now for, IIRC, $3500 so that's the neighborhood.

A few days ago I took the time to send out a ton of Drouin information files to a guy on the East Coast who was supposedly desperate to score a Drouin, but I haven't heard back from him yet.

If anyone here is a serious player and has questions, PM me. But please, everyone's time is valuable, especially at my age.

Thanks! RR

Bill/BentON Racing · « **Reply #18 on:** March 02, 2013, 06:28:39 PM »

That's a whistle I 'd like to hear again!!!

cben750f0 · « **Reply #19 on:** March 05, 2013, 11:44:56 PM »

yes yes it is.... some things are worth the effort and cash sometimes too=)

peace

Jmcelfres2000 · « **Reply #20 on:** April 23, 2013, 06:30:50 PM »

I have a complete Drouin Supercharger setup.

Ricky_Racer · « **Reply #21 on:** April 23, 2013, 06:35:50 PM »

Jmcelfres2000, assuming that you've posted because you want to sell, how about pics and a price? RR

Bill/BentON Racing · « **Reply #22 on:** April 23, 2013, 06:43:18 PM »

Trade, setup new , used, pics and pricing, Thanks and welcome aboard. Bill

Jmcelfres2000 · « **Reply #23 on:** April 23, 2013, 07:42:18 PM »

It is the completebike setup that came off of drag bike. Guy said wheel spin was uncontrolable because he put it on a built motor. After I got it I can see why he was having problems, the pulley off the crank is a 46 tooth and it should be abouta 30 tooth. I'm not ready to sell it yet but I will try to post some pics.

Ricky_Racer · « **Reply #24 on:** April 23, 2013, 08:12:49 PM »

If you need help on sourcing belts, let me know. I have that info along with a ton of Drouin materials I'll be happy to share.

I have two complete kits and, yeah, I guess I'm starting to give some serious thought to selling one of them. RR

News:

Author Topic: drouin supercharger availability? (Read 10423 times)