« previous next »
Pages: [1]   Go Down

Author Topic: ART 65.00 mm piston rings?  (Read 1217 times)

0 Members and 1 Guest are viewing this topic.

Offline Johnny.sohc750

  • Full Member
  • *
  • Posts: 5
  • Can one have enough CB's?
ART 65.00 mm piston rings?
« on: January 25, 2014, 05:55:25 pm »
I'm looking at a good deal on a used 836cc kit for my CB750K 1975, but I need to know if I can get some new piston rings for this kit before I buy it.

It's got 65.00 mm domed ART pistons. Anyone know where to get piston rings for those?

If I posted this question in the wrong section I apollogize, I'm new to this board.

Thanks in advance.
Logged
...but I'm REALLY not sure.

Offline Jerry Rxman Griffin aka MuthaF'er

  • This MuthaF'er is getting to be a
  • Really Old Timer ...
  • *******
  • Posts: 14,890
  • Bought her new 4/75
Re: ART 65.00 mm piston rings?
« Reply #1 on: January 25, 2014, 09:47:50 pm »
what are the ring widths/thicknesses? 1.5mm and 2.5mm? 4th over cb350 twin 1968+
Logged
As of today 3/13/2012 my original owner 75 CB750F has made it through 3 wives, er EX-wives. Free at last.  ;-)

Offline Johnny.sohc750

  • Full Member
  • *
  • Posts: 5
  • Can one have enough CB's?
Re: ART 65.00 mm piston rings?
« Reply #2 on: January 25, 2014, 11:51:23 pm »
Hey Jerry and thank you for your quick reply. I don't know since I don't have them on hand. I will try and find out.
Thanks.
Logged
...but I'm REALLY not sure.

Offline classic bike tuner

  • Enthusiast
  • **
  • Posts: 113
  • http://www.cmrch.nl/
    • cmrch.nl/
Re: ART 65.00 mm piston rings?
« Reply #3 on: January 26, 2014, 03:19:22 am »
Logged

Offline TurboD

  • Hot Shot
  • ***
  • Posts: 680
Re: ART 65.00 mm piston rings?
« Reply #4 on: January 26, 2014, 06:31:55 am »
Measure the rings for sure. I just bought a 836 piston from Crinzinimage (feebay seller classic bike tuner mentioned). I like the kit and think its a great value, I did notice that the rings are slightly thicker than my stockers. If you can measure the ones you have, I will compare them to these.   
Logged

Offline Johnny.sohc750

  • Full Member
  • *
  • Posts: 5
  • Can one have enough CB's?
Re: ART 65.00 mm piston rings?
« Reply #5 on: January 26, 2014, 02:12:21 pm »
Quote from: classic bike tuner on January 26, 2014, 03:19:22 am
look here by mitsuo  messure the thicknes of your old one's

he olso has a biggbore gasket

http://www.ebay.nl/itm/69-77-HONDA-CB750K-836cc-65mm-BIGBORE-PISTON-RING-SET-4-Piston-Rings-Include-/161086612677?pt=Motorcycles_Parts_Accessories&hash=item258182a4c5

gerrit

Hey Gerrit,

Do you know if this kit of rings fit the ActionFours 836cc kit? (CB350T +1.00 bore pistons at 65.00 mm) The ART pistons I previously mentioned is from a CB350T from what I've learned.

Or does anyone know where to get piston rings for the old CB350T +1.00 bore pistons?

Thanks again.
Logged
...but I'm REALLY not sure.

Offline Big Jay

  • Expert
  • ****
  • Posts: 1,252
    • CBRzone
Re: ART 65.00 mm piston rings?
« Reply #6 on: January 26, 2014, 05:32:37 pm »
Logged

Offline classic bike tuner

  • Enthusiast
  • **
  • Posts: 113
  • http://www.cmrch.nl/
    • cmrch.nl/
Re: ART 65.00 mm piston rings?
« Reply #7 on: January 31, 2014, 02:51:31 am »
i messured the grooves in the piston  2,8mm vor the oil groove and 1,5mm vor the other two

gerrit
Logged
Pages: [1]   Go Up
« previous next »