« previous next »
Pages: [1]   Go Down

Author Topic: S90 fork disassembly  (Read 855 times)

0 Members and 1 Guest are viewing this topic.

Offline Gentlemanjim

  • Full Member
  • *
  • Posts: 25
S90 fork disassembly
« on: April 27, 2014, 09:08:47 PM »
My 1968 S90 has damper the rod/bolts at the bottom.  How do I hold the top side to unscrew it?
Logged

Offline tbpmusic

  • Expert
  • ****
  • Posts: 791
Re: S90 fork disassembly
« Reply #1 on: April 28, 2014, 09:37:17 AM »
With forks of that type it's best to loosen the bottom bolts while the tubes are still clamped up in the stem and top clamp.
That goes for the top bolt as well (where you pour the oil in) for models with the pinch-bolt tops........
« Last Edit: April 28, 2014, 09:39:03 AM by tbpmusic »
Logged
"If you can't fix it with a hammer, then it's an electrical problem"

Bill Lane
 '71 CB450 Mutant/ '75 CB200/ '81 CM200/ '71 C70M

Offline Gentlemanjim

  • Full Member
  • *
  • Posts: 25
Re: S90 fork disassembly
« Reply #2 on: April 28, 2014, 09:41:01 AM »
Yes I did that.  It's the bolt at the bottom of the leg that screws into the damping rod that I need to hold from above.  It just spins now
Logged
Pages: [1]   Go Up
« previous next »