Topic: honda cb 500 four how to assembly transmission.?

[kranta]

So, how to is easiest way to put transmission in upper crank case? is it possible  to do it so that you put counter shaft first in and then put main shaft? because if i think how to put transmission on, i always think that it is easiest put that counter shaft first in and then main shaft. Or how it is easiest to put in? because manual doesnt say how to put transmission in.

[dave500]

I sort of drop them in together?

[kranta]

ok, but have you tried to put counter shaft first and then main shaft and if you have tried did you got them in??

[dave500]

try it both ways and see what works for you?

[kranta]

i dont have engine open yet, but i am asking this because i have allways prepare good before i open engine because i want that engine build go well. But is here somebody who is put transmission in like i say or even tried to put transmission in like i say!!?? or how manuals says that it how transmission should put in the upper case. because what i readed it only say "put transmission in upper case with section 10 C." And one of my mates say that if you put first counter shaft in and then main shaft its go right its place? and when you try to put main shaft in when counter shaft is in like in first picture (i know forks are wrong) does main shaft go first like in picture 2? and does all gears roll? and if you put main shaft in so that boths shaft gears are contacting with each other and then you push main shaft down does it roll in its place like showed picture 3? i mean that you put main shaft next to counter shaft and roll it to its place with counter shafts gears, is it possible? this video can help you to understand what i try to say

sorry bad english.
and if you dont get it something say it.

[kranta]

if i put transmission together in how i can get forks in like position. and in picture main shaft isnt drop in the its place so if i push it down shoulds its go its place? because gears should roll if i push main shaft, am i right?

[dave500]

#$%* man just relax and cross that bridge when you get to it.

[kranta]

if i could! but actually i have working engine in my bike but i am going to buy another motor where isnt top end and he is asking for it something like 70-140 dollars so its in euros 100-200euros so is this fare price? and dave500 i am asking this transmission thing because i wana know how can i built transmission easiest way but everybody says that put transmission together in upper crankcase but i dont get how i can get forks in right position? but i think that first counter shaft then main shaft is easiest way because then you can keep forks in right place and then drop main shaft? but that way explained hold think if you do it like i say its actyally same think than you put them together because i have meaned that when counter shaft on its place you put main shaft gears touching counter shafts gears and then you roll gears so that main shaft go its place. because this should bee possible, am i right? (sorry, dave500 you maybe hate because thees post..? )

[dave500]

no hate kranta and your English is fine,once you have a transmission apart in front of you itll be easier to understand,when the time comes were all here to help if you need.