« previous next »
Pages: 1 [2]  All   Go Down

Author Topic: CB750 F2 cylinder head  (Read 8569 times)

0 Members and 1 Guest are viewing this topic.

Offline Don R

  • My Sandcast is a
  • Really Old Timer ...
  • *******
  • Posts: 21,279
  • Saver of unloved motorcycles.
Re: CB750 F2 cylinder head
« Reply #25 on: December 17, 2018, 09:08:38 PM »
Quote from: HondaMan on May 17, 2015, 08:12:37 PM
I've been using the 750 DOHC pistons with their shoulder turned off 1.5mm, about 1/4" in, with the K7/8 and F2/3 heads. It makes the CR about 9.2:1 on the F, and about 9.5:1 on the K7/8 head. I also mill the heads a bit, about 0.5mm.

 At what bore size Mark?
Logged
No matter how many times you paint over a shadow, it's still there.
 CEO at the no kill motorcycle shop.
 You don't need a weatherman to know which way the wind blows.
Pages: 1 [2]  All   Go Up
« previous next »