Topic: Need swingarm measurement 750 69-76

[754]

Need center of swingarm pivot..to approx center of axle if it were all the way ahead...got to sort of eyeball that part but say about 1/2 to 5/8 inch past front edge of slot..
 Forgot to measure, when I was at my bike today..thanks

[Retro Rocket]

Frank, do you have an axle on hand, add half that diameter to this...415mm from center of pivot to start of axle slot...

[754]

Thanks will add the 10mm plus 3 or 4 mm....should be spot on.....getting roughly 16 7/8 inch..thanks

[Retro Rocket]

Thanks will add the 10mm plus 3 or 4 mm....should be spot on.....getting roughly 16 7/8 inch..thanks

Frank, that measurement is within about 1 mm either way, the swingarms are in frames so it was very close but maybe not exact, I hope it helps.... What are you actually doing..?

[754]

I want to see how much longer that clubfoot of Treys is,  over stock..
looks like 4- 4 1/2 inches over...perfect.

[Retro Rocket]

Ahhh...