« previous next »
Pages: [1]   Go Down

Author Topic: Need longer swingarm bolt and engine mount bolt for rearset brackets. Any ideas?  (Read 1082 times)

0 Members and 1 Guest are viewing this topic.

Offline palo86

  • Full Member
  • *
  • Posts: 10
Need longer swingarm bolt and engine mount bolt for rearset brackets. Any ideas?
« on: April 22, 2016, 10:50:54 AM »
I have a 75 CB550F and am trying to make the rearset brackets I purchased from Cognito Moto work.  The main problem I'm running into is that the swingarm/engine mount bolts are too short to mount the brackets.

Does anyone know where I can source longer bolts?

Thanks!

Chris
« Last Edit: April 22, 2016, 11:07:06 AM by palo86 »
Logged

Offline flyintiger

  • Full Member
  • *
  • Posts: 4
Re: Need longer swingarm bolt and engine mount bolt for rearset brackets. Any ideas?
« Reply #1 on: April 22, 2016, 01:32:05 PM »
McMaster Carr probably has what you need. http://www.mcmaster.com/#standard-cap-screws/=123hilm
Logged

Offline scunny

  • Old Timer
  • ******
  • Posts: 4,615
  • don't call me expert
Re: Need longer swingarm bolt and engine mount bolt for rearset brackets. Any ideas?
« Reply #2 on: April 22, 2016, 03:09:17 PM »
don't know if they are what you are after, the 650 bolts are longer, they are used to mount the footpeg mounts.
Logged
past-cb100,ts250,cb500,cb500,gs1000,gs650g.phillips traveller
present-CB 650 retro
            VTR1000F3
           XL250S riverbed rocket
           TS250[sold]
           TS185[sold]
           XL125S[sold]
           MT50 (white)
           MT50 (red)[sold]
           KN250/XS400 project
           XR/XL250 bitsa under construction
           SL100[sold]
           XL250R
           pedal(pub bike) leaks oil
my gallery http://gallery.sohc4.net/members/personal/scunny

Offline palo86

  • Full Member
  • *
  • Posts: 10
Re: Need longer swingarm bolt and engine mount bolt for rearset brackets. Any ideas?
« Reply #3 on: April 22, 2016, 03:09:52 PM »
These are the brackets.



Logged

Offline palo86

  • Full Member
  • *
  • Posts: 10
Re: Need longer swingarm bolt and engine mount bolt for rearset brackets. Any ideas?
« Reply #4 on: April 22, 2016, 03:10:55 PM »
Thanks for the replies guys.  I'll look mcmaster's and the 650 bolts as well.
Logged
Pages: [1]   Go Up
« previous next »