Topic: cb500four

[Brendo]

Hi there, been looking at this site for a while now and have been working on this 500 a bit over a year. The bike was in a very bad way when i got it and the engine had been seized for many years, I have finnished the engine now whith fresh bearings and top end and am currently working on the front end of the bike. im going to send things off to be rechromed slowly due to being so expensive but i think its starting to look nice already with paint cleaning and polishing so far. cheers

[Stev-o]

Howdy from Texas. 

Why not start a thread in the Project Shop section and post pics and progress?

[Brendo]

Ok will do 👍

[AndyH]

Hi Brendo,

And welcome from another CB500 restorer from Western Australia! 

Cheers
Andy

[Brendo]

Hi Andy, thanks you, I don't suppose you might have a speedo for an Aussie delivered 500? Cannot find one anywhere and seems no other speedo will fit, cheers brenden

[AndyH]

Hi Andy, thanks you, I don't suppose you might have a speedo for an Aussie delivered 500? Cannot find one anywhere and seems no other speedo will fit, cheers brenden

Brendo, unfortunately the only speedo I have is the one going back on my bike!  I'll check with my mate tomorrow arvo....he may have one.

[Melburn.CB500Four]

I think I've got a couple of speedoa , I'll try and remember to have a look on the weekend.
Where are you located?

[Brendo]

I think I've got a couple of speedoa , I'll try and remember to have a look on the weekend.
Where are you located?

Hi sorry I’m in Brisbane iv had to put the bike to the side for a while and have not checked site. Let me know if you have anything still would be great.