Topic: Sprocket nuts hitting lower shock nuts after rear brake changed out

[CycleRanger]

Also why is there two different schematics for the rear wheel?

The one I posted is from the parts list. The other is from the manual.

[gbal06]

gotcha thanks

[Airborne 82nd]

I agree, I am going to take it back apart tomorrow and look at everything.  Can someone tell me which way #17 goes on?  is it the big side toward the wheel or the small size (that slides in to the wheel)  Thanks

17 is the inner tube goes inside the tire

[754]

There may be 500 and 550 versions.

[gbal06]

so for the 550k version which way should it go?  Currently the smaller side is going towards the wheel.

[innovativems]

so for the 550k version which way should it go?  Currently the smaller side is going towards the wheel.

Like cal said


Sent from my iPhone using Tapatalk

[gbal06]

so for the 550k version which way should it go?  Currently the smaller side is going towards the wheel.

Like cal said


Sent from my iPhone using Tapatalk

ok tomorrow I will take the wheel off and switch the collar to larger toward the wheel to see if that changes the spacing

[gbal06]

Here is what the spacing looks like with the current collar

[754]

Is that a nylon on the shockbolt, if so remove the washer behind it.

[gbal06]

I don't believe it is but I am at work and will take a look at it tomorrow

[Airborne 82nd]

I agree, I am going to take it back apart tomorrow and look at everything.  Can someone tell me which way #17 goes on?  is it the big side toward the wheel or the small size (that slides in to the wheel)  Thanks

17 is the inner tube goes inside the tire

In his first linked picture, it's the collar. Fat end towards wheel-

Don't see why or how there are two different pic for same year and model something is not correct I thought cmsl uses the manual for there site pic. I think we are looking at two different bikes or models.
cal that was my poor attempt at humor

[CycleRanger]

The diagrams are the same only the part numbering is different.

[754]

I think you mean  the part illustration numbers are different .