« previous next »
Pages: [1]   Go Down

Author Topic: Engine Hanger Bolts A, B and C - 1975 CB750F  (Read 1017 times)

0 Members and 1 Guest are viewing this topic.

Offline AndyN

  • Full Member
  • *
  • Posts: 41
Engine Hanger Bolts A, B and C - 1975 CB750F
« on: June 11, 2018, 09:56:51 PM »
Hey all,

I have the bolts, but I'm not quite sure which is which.
Does anyone have the dimensions (W x L) for each bolt.
Again, this is going on a 1975 F SS

See the photo for some reference of 4 bolts that I have.

Thanks!
 

Logged

Offline AndyN

  • Full Member
  • *
  • Posts: 41
Re: Engine Hanger Bolts A, B and C - 1975 CB750F
« Reply #1 on: June 11, 2018, 10:15:52 PM »
Sorry, the far left one (14mm) is the swingarm pivot bolt. Just need to know the 12mm and two 10mm bolts
Logged

Offline slikwilli420

  • Master of Disaster
  • Master
  • *****
  • Posts: 2,357
Re: Engine Hanger Bolts A, B and C - 1975 CB750F
« Reply #2 on: June 12, 2018, 07:01:58 AM »
They all only go in one place, only one hole for the 12mm and one of the 10mm needs to be longer than the other. Put them in the frame and see where they need to go.
Logged
All you gotta do is do what you gotta do.

Vintage Speed Parts Mashup: http://forums.sohc4.net/index.php?topic=133638.0
Rickman CR Parts Kit Refresh: http://forums.sohc4.net/index.php/topic,154837.0.html
AHRMA CB750 Racer: http://forums.sohc4.net/index.php/topic,158461.0.html
AHRMA Superbike Heavyweight Racer: http://forums.sohc4.net/index.php/topic,173120.0.html
'76F CB750 Patina Redemption: http://forums.sohc4.net/index.php/topic,174871.0.html

Offline AndyN

  • Full Member
  • *
  • Posts: 41
Re: Engine Hanger Bolts A, B and C - 1975 CB750F
« Reply #3 on: June 12, 2018, 01:31:54 PM »
Thank you, I will check them in the frame tonight.
I have also gathered some more information on the dimensions and worked out which ones are which by designated letter.
Logged

Offline AndyN

  • Full Member
  • *
  • Posts: 41
Re: Engine Hanger Bolts A, B and C - 1975 CB750F
« Reply #4 on: June 12, 2018, 01:33:50 PM »
Here is more info for the Hanger Bolts letter designation and dimensions.
These can be mapped up into the Honda shop manual.

Thanks,
Andy
Logged
Pages: [1]   Go Up
« previous next »