Topic: Engine Hanger Bolts A, B and C - 1975 CB750F

[AndyN]

Hey all,

I have the bolts, but I'm not quite sure which is which.
Does anyone have the dimensions (W x L) for each bolt.
Again, this is going on a 1975 F SS

See the photo for some reference of 4 bolts that I have.

Thanks!
 

[AndyN]

Sorry, the far left one (14mm) is the swingarm pivot bolt. Just need to know the 12mm and two 10mm bolts

[slikwilli420]

They all only go in one place, only one hole for the 12mm and one of the 10mm needs to be longer than the other. Put them in the frame and see where they need to go.

[AndyN]

Thank you, I will check them in the frame tonight.
I have also gathered some more information on the dimensions and worked out which ones are which by designated letter.

[AndyN]

Here is more info for the Hanger Bolts letter designation and dimensions.
These can be mapped up into the Honda shop manual.

Thanks,
Andy