Topic: Wheel/frame torque specs

[The Gurg]

Cb750k5

Always difficult to find good torque specs. Have several different spec sheets I work from. The Honda manual has very few listed in the table in the back. Probably should have bought a Clymer manual or something.

Sometimes I wind up googling the individual part and torque specs, takes way to long. Is there a better way?

Can I use these diagrams for the K7 on my K5? Or is that asking for trouble!

[robvangulik]

I don't think there will be much/any difference between cb's concerning cycle parts, none of us wants to loose handlebars, footrests or indicators while on the run

[The Gurg]

Yeah that makes sense/was what I was thinking. Thanks for confirming!

Have engine hanger bolts listed at 39.8~47. Assuming that applies to all three long bolts that hold the engine. Then there are those two triangle plates with 8mm & 10mm bolts assuming those torque to 13~18.1 (8mm)and 21.7~28.9 (10mm)? [all in ft lbs]