Here is my first question, post, and I'm sure you must have come across it before, it's about bullet connecters, I've included a picture of the problem connecter, Pic 1, it's 1 wire in with 4 connections off. My problem is the bullets drop out, too slack, I did nip the connecter but it must be cracked because nipping it with the pliers makes no difference, pic 2 is all I can find and pic 3 is how big they are along side the original, my problem is I don't want to cut the bullets off and using what I have found means the bullets have to go as the new connecters are just push fit and I'm trying to keep the bike standard, has anyone else had this problem with the old connecters, I did try a breakers to cut off the connecter from an old wiring loom but they laughed and told me to buy a new bike. Sorry I've tried to put the pictures up but every time I do it clears the form.
