Topic: 1998 Honda Valkyrie - future profect???

[Johnie]

A friend wants me to consider this from a motivated seller. The owner just died and they want to move it. Not really crazy of the Valkyrie look. 1500cc…I sent him a list of questions. Anyone have any pros or cons on this bike? Looks like a Honda take off look of a HD. Thx

[spotty]

had one for a while, lovely bike to ride, smooth as butter, very torquey and more than enough power for its needs

however, no-one over 6'2" should consider this bike, the rear cylinders are where your feet should be, forcing a hideously uncomfortable bending of the knees, you can't realistically use highway pegs as they will put you in the birthing position due to the width and height of the cylinders. I'm 6'5" so all the above applies but more so

originally i thought it was due to me needing a hip replacement but after that happened it was just as bad

oh, and should you need to replace/repair the clutch hydraulic slave cylinder, book in most of a weekend to do it, especially if someone has fitted the aftermarket centre stand

[Johnie]

Thanks for the tips spot. Helps a lot. Like I said I am not real fond of the look of the bike. Great clutch info too.

[Stev-o]

  I am not real fond of the look of the bike.

+1... I'd pass.

[Mikey G.]

It's a bit heavy in the parking lot, and fuel milage isn't the greatest, but apart from that it's the best bike I've ever owned.

It's fast, smooth, and comfortable.  The Goldwing motor is pretty bulletproof, and you'll get tired of riding it long before the bike gets tired of running.

Depending on the price it may be worth picking it up to try it, and flipping it if you don't, but that really depends on how motivated the seller is.  I love mine, but I'm also biased.

[Johnie]

I see some on marketplace between $2500 - $6,000.

[Mikey G.]

I paid $2500 + a two day drive for mine, and I feel like I did good.  I tend to agree with the styling complaints- I'm doing some cosmetic modifications on mine, but I'm going to leave the bones alone.  It's needed nothing so far except tires, oil and gas.  It's nice going down the freeway at 80 and the bike not caring in the slightest.

(The clutch slave is a pain because you need to remove the side stand to take it out.  That said, the whole bracket is only two bolts, so assuming you don't have the (rare) aftermarket center stand, it's not bad.  And it's not like it's something that's known for going bad.)

Another thing to think of- a lot of the aftermarket chrome bits fetch good money these days.  That light bar alone is a Cobra, and would fetch $600, easy.  The other little chrome add-ons might get you close to $75-$100 each.  I had a bunch of that stuff on mine and made a third of what I paid for the bike back.

[Johnie]

Mikey I am not familiar with the "clutch slave" and why would you take it out?

[grcamna2]

The picture on the first post makes it look like it just 'appeared out of thin air' with the smoke 

[Mikey G.]

Mikey I am not familiar with the "clutch slave" and why would you take it out?

The Valkyrie has a hydraulic clutch, so there's a slave cylinder on the bottom rear of the engine.  If the seals start to leak, it's three bolts to pull it off the engine and replace the seals.  Problem is, one of the bolts hits the side stand bracket, so that has to come off first.  I had to do mine a couple weeks ago.  Annoying, but I've had worse jobs.

On the plus side, the bleeder is on the end of a tube that run up to the top of the engine, so bleeding the clutch afterward is real easy.

[Johnie]

Thx for the explanation Mike. Have not heard back from the friend yet. He's going back to the house after the funeral in a week or so and will get more info then.