Topic: Collar / Spacer Rear Wheel Identification

[heyitsrama]

Howdy,

Was super stocked this morning about putting the wheels back together but found out that I'm missing a spacer/collar, so after around 2 hours of wasted time looking for it, decided to ask the professionals here.

The spacer that I have is 32mm length, wide Diameter 38mm, thin diameter 34mm



But i don't know which one it is because there are two on the bike, parts 5 or 12 on the diagram.

I guess i also need to locate the missing part, does anyone know a seller?

[robvangulik]

The one you have is the spacer located in the chain wheel carrier, #4 and 5 are rubber dampers between carrier and hub, #6 sits between carrier and swingarm and you need another one between drumbrake and swingarm.

[heyitsrama]

The one you have is the spacer located in the chain wheel carrier, #4 and 5 are rubber dampers between carrier and hub, #6 sits between carrier and swingarm and you need another one between drumbrake and swingarm.

Ah i just realized that it was a 6 not a 5 on the diagram, yeah i have all the rubber pieces installed already. So the part that I need is number 12, which is called a "distance collar B?"

[heyitsrama]

ahahah i can't figure out which one i have nothing to compare to? Possible that you can get dimensions for what you have?

[heyitsrama]

I'll try to get them tonight before I turn in. They're conveniences sitting in a plastic bag on huge floor of the garage having just disassembled an entire rear and front wheel for powder coating yesterday.

It might help me, if you can indicate which parts you know you have, or those you think you don't. Are we just down to 6 or 12?

yeah its just down to 6 or 12, the one that I have is 32mm in length, ill finish off the front tire today just to make sure i have everything.

[heyitsrama]

Ill shoot you a PM. Thx calj