Author Topic: Need help tracking down some rings!!!!!!!!!!!  (Read 1466 times)

0 Members and 1 Guest are viewing this topic.

Offline Short Round

  • Hot Shot
  • ***
  • Posts: 306
Need help tracking down some rings!!!!!!!!!!!
« on: October 11, 2007, 01:51:20 pm »
Hey Guys
        Just bought a 555 big bore kit and need some help tracking down some rings.  It came with a one piece oil ring and I am wanting a 3 piece.  Has anyone found any before or used aftermarket rings for a 555 kit.  I don't have a clue how to measure these.  Any info would be great..................Chris
1974 CB550

Offline Short Round

  • Hot Shot
  • ***
  • Posts: 306
Re: Need help tracking down some rings!!!!!!!!!!!
« Reply #1 on: October 11, 2007, 02:38:37 pm »
bump
1974 CB550

Offline MRieck

  • Really Old Timer ...
  • *******
  • Posts: 10,545
  • Big ideas....
Re: Need help tracking down some rings!!!!!!!!!!!
« Reply #2 on: October 11, 2007, 03:23:26 pm »
 This was addressed in a very recent thread
Owner of the "Million Dollar CB"

Offline mack808

  • Full Member
  • *
  • Posts: 37
Re: Need help tracking down some rings!!!!!!!!!!!
« Reply #3 on: October 11, 2007, 03:32:05 pm »
do you know what the brand of big bore kit you have is? And what bore size are the pistons?
CB350 twin vintage road racer, CB350F project, GS750es daily rider, NS400r play bike, 2 MB5s, Z50r project, CB500/590 vintage racer built for friend, CT200 project, and a Gina (Gilera copy made in Argentina)...  And ?????

Offline Short Round

  • Hot Shot
  • ***
  • Posts: 306
Re: Need help tracking down some rings!!!!!!!!!!!
« Reply #4 on: October 11, 2007, 03:56:01 pm »
all I now is that is a 555 big ore kit, and I'm pretty sure they are ART Pistons though.
1974 CB550

Offline paulages

  • Old Timer
  • ******
  • Posts: 3,876
  • 1976 cb735
    • DOOMTOWN RIDERS P.R.M.C.
Re: Need help tracking down some rings!!!!!!!!!!!
« Reply #5 on: October 11, 2007, 04:22:08 pm »
i haven't seen the other thread-- maybe your question has been addressed there. in any case, try hastings co.
paul
SOHC4 member #1050

1974 CB550 (735cc)
1976 CB550 (590cc) road racer
1973 CB750K3
1972 NORTON Commando Combat
1996 KLX650 R

Offline Jerry Rxman Griffin aka MuthaF'er

  • This MuthaF'er is getting to be a
  • Really Old Timer ...
  • *******
  • Posts: 14,890
  • Bought her new 4/75
Re: Need help tracking down some rings!!!!!!!!!!!
« Reply #6 on: October 11, 2007, 04:27:10 pm »
As Mike said we have discussed this already. Send a piston or all 4 to Hastings or Total Seal and let them fit rings. If they don't have ready made rings that fit your pistons then they can cut your pistons to the rings they have. I don't think you're going to get off as easy as you are hoping on this so just find a box and ship 'em out!
As of today 3/13/2012 my original owner 75 CB750F has made it through 3 wives, er EX-wives. Free at last.  ;-)

Offline MRieck

  • Really Old Timer ...
  • *******
  • Posts: 10,545
  • Big ideas....
Re: Need help tracking down some rings!!!!!!!!!!!
« Reply #7 on: October 11, 2007, 05:51:06 pm »
As Mike said we have discussed this already. Send a piston or all 4 to Hastings or Total Seal and let them fit rings. If they don't have ready made rings that fit your pistons then they can cut your pistons to the rings they have. I don't think you're going to get off as easy as you are hoping on this so just find a box and ship 'em out!
  ;)
Owner of the "Million Dollar CB"

Offline bryanj

  • Really Old Timer ...
  • *******
  • Posts: 13,855
  • CB500 Number 1000036
Re: Need help tracking down some rings!!!!!!!!!!!
« Reply #8 on: October 14, 2007, 08:39:45 am »
555 kit is 550 2nd oversize but Honda rings aint cheap and come in piston kits not individualy
Semi Geriatric ex-Honda mechanic and MOT tester (UK version of annual inspection). Garage full of "projects" mostly 500/4 from pre 73 (no road tax in UK).

Remember "Its always in the last place you look" COURSE IT IS YOU STOP LOOKIN THEN!