Author Topic: Help with this seat - I'd sure like to use it!  (Read 2354 times)

0 Members and 1 Guest are viewing this topic.

Offline Tim.

  • Master
  • *****
  • Posts: 1,945
  • www.DOTHETON.com
    • DO THE TON
Help with this seat - I'd sure like to use it!
« on: July 02, 2005, 04:20:15 PM »
So, I picked up this seat a few days ago.  Apparantly for a CB500K, but I thought, well, it just might fit my '76 CB550F (wishful thinking).  It's close, but not quite.

I might be able to cut the seat pan at the front to shorten that part, and the holes for the hinge and latch look like they'll line up.  However, this will require some precision work, as I would want to preserve the current upholstery on the seat.  If I'm going to recover it, I might as well build a whole new seat.

Thoughts?  Anyone ever seen/used one of these before?  If I can't make it work easily, I'll be selling it.  So, if anyone's interested, let me know.  For some $ and a good condition CB550F seatpan (don't care about the foam or vinyl) I'd probably let it go now.

Roule comme dans les années 70...   Roll as in the Seventies...

Offline chippyfive50

  • Hot Shot
  • ***
  • Posts: 405
  • NO PEE ON TEPEE
    • thesweetimpala
Re: Help with this seat - I'd sure like to use it!
« Reply #1 on: July 03, 2005, 06:56:39 AM »
That seat is cool,,,..... but not worthy of that NICE 550... what you need is a 500 to go with that seat, and chop chop!!
SOHC Member#4000
71' 500K0 #1021237--E1108327
78' 550
72' 750K2(sold to "Craig")
74' 750K4 #2306334--E2303422
73' CL175
http://gallery.sohc4.net/main.php?g2_itemId=14013

Offline mcpuffett

  • Master
  • *****
  • Posts: 2,354
Re: Help with this seat - I'd sure like to use it!
« Reply #2 on: July 03, 2005, 07:19:36 AM »
hey tintin,that could be your new project  ;) build a nice bike around that seat? :-\  mick.
Honda CB750 KO 1970,   Honda VTX 1300 2006, Lancaster England.

Bobby

  • Guest
Re: Help with this seat - I'd sure like to use it!
« Reply #3 on: July 03, 2005, 01:19:52 PM »
Tintin, I think Chippy and Mr. Puffet are right on track...  I used sound and tested "Backwards Engineering" when I began 'Project X'.  I found a seat, then a Tracy body then...  Well, check the digital eqation posted below.  Good Luck!

Offline Tim.

  • Master
  • *****
  • Posts: 1,945
  • www.DOTHETON.com
    • DO THE TON
Re: Help with this seat - I'd sure like to use it!
« Reply #4 on: July 03, 2005, 02:04:31 PM »
I can't afford that kind of math  ;)  Seriously, I'd love to have a 500 again, but I don't have the space for it.  I need to find a local 500 to see if this seat really does bolt onto it.

I think I'll just continue my quest for a decent 550 seat pan and build my own seat.  Maybe it's time to sell my nearly-NOS brown vinyl seat on eBay.  That should fund a custom seat and maybe even some paint on my spare tank and sidecovers (and maybe some clubman bars etc. etc. etc.).  The paint is 1975 anyhow, so keeping a 1976 seat around is kind of pointless.
Roule comme dans les années 70...   Roll as in the Seventies...

cub

  • Guest
Re: Help with this seat - I'd sure like to use it!
« Reply #5 on: July 04, 2005, 01:09:52 AM »
I suppose the shipping from Canada to Sweden would match up buying a new seat..:( Otherwise I would be quite interested in that seat. Do you have any pics on the mounts on the other side of the seat?

Offline Chris Liston

  • Expert
  • ****
  • Posts: 942
    • http://christopherliston.com
Re: Help with this seat - I'd sure like to use it!
« Reply #6 on: September 02, 2005, 08:24:41 PM »
So, I picked up this seat a few days ago.  Apparantly for a CB500K, but I thought, well, it just might fit my '76 CB550F (wishful thinking).  It's close, but not quite.

I might be able to cut the seat pan at the front to shorten that part, and the holes for the hinge and latch look like they'll line up.  However, this will require some precision work, as I would want to preserve the current upholstery on the seat.  If I'm going to recover it, I might as well build a whole new seat.

Thoughts?  Anyone ever seen/used one of these before?  If I can't make it work easily, I'll be selling it.  So, if anyone's interested, let me know.  For some $ and a good condition CB550F seatpan (don't care about the foam or vinyl) I'd probably let it go now.



Tintin, that is an OLD Corbin seat.  I had a similar one for my 550 a few years ago but sold it on ebay after I found my current seat.  I had wished now that I kept it.  Actually I think Rob Lloyd may have bought it as he had the SAME seat on the black 550 roadster in his bikepics pictures.  Very comforable seat.  I actual aquired it in trade for a 550K seat, even swap.  I wish I still had the corbin seat though..
2008 Triumph Speed Triple Black and NASTY
1976 CB550F Cafe in progress
http://christopherliston.com
http://gallery.sohc4.net/main.php?g2_itemId=2402

Offline Tim.

  • Master
  • *****
  • Posts: 1,945
  • www.DOTHETON.com
    • DO THE TON
Re: Help with this seat - I'd sure like to use it!
« Reply #7 on: September 03, 2005, 07:46:36 AM »
Well, another attempt at mounting the seat failed on the 550F.  Just won't fit, and it would require serious mods to do it.

So, I'm selling it.  No way around it.  It says "Honda 500" on the bottom, on a red sticker and appears to be new, or very close to it.  Can't say for sure if it will fit a CB500K, but it might.

Sigh.  Now I need the seat pan for a 550F or late model 550K to modify.  Everytime I sit on my was-NOS brown vinyl seat I cringe at the thought of ruining it.
Roule comme dans les années 70...   Roll as in the Seventies...

Offline Einyodeler

  • Expert
  • ****
  • Posts: 1,029
  • Midnight bugs taste best!!!
Re: Help with this seat - I'd sure like to use it!
« Reply #8 on: September 03, 2005, 08:00:47 AM »
Maybe the seat you`ve got there was made to replace the stock brown one on the CB500T.
1972 CB500 - 1973 CB500 - 1974 CB550K - 1975 CB550F - 1975 CB750F - 1976 CJ360 - 1983 CR480 - 1970 BSA A65T Thunderbolt



Download Motorcycle Shop Manuals here: http://forums.sohc4.net/index.php?topic=17788.0

Offline Chris Liston

  • Expert
  • ****
  • Posts: 942
    • http://christopherliston.com
Re: Help with this seat - I'd sure like to use it!
« Reply #9 on: September 03, 2005, 05:09:09 PM »
I've found that 550K and F seat pan mounting points are basically the same.  The issue comes with closing the seat as the K is too far forward and hits the tank.  You could try getting a K and cutting about 1" off the front of it.  I just got luck on an almost mint brown (small tear in back left corner) 77 550F seat on ebay last week for 36 bucks.  I'm going to have it recovered black and use that as my 2 up seat as the foam is in really nice shape.  I'm going to take my current seat which is also very very nice and make a solo seat out of it. 

Scan Ebay and you'll get lucky.  this is the 3rd 550F seat I've gotten for around 30 bucks.  Sometimes people just aren't looking or bidding :)
2008 Triumph Speed Triple Black and NASTY
1976 CB550F Cafe in progress
http://christopherliston.com
http://gallery.sohc4.net/main.php?g2_itemId=2402