« previous next »
Pages: [1]   Go Down

Author Topic: cb750 k7 refitting engine  (Read 1674 times)

0 Members and 1 Guest are viewing this topic.

Offline tworiversuk

  • Full Member
  • *
  • Posts: 46
  • cb750k7
cb750 k7 refitting engine
« on: October 22, 2008, 02:39:03 AM »
Hi all,
do I fit the swing arm first before fitting the engine back in the frame?
regards
Mike
Logged
Life's just a box of chocolates

Offline City Boy

  • Hot Shot
  • ***
  • Posts: 689
Re: cb750 k7 refitting engine
« Reply #1 on: October 22, 2008, 05:13:26 AM »
Your choice.Neither one required before the other.   Rock On
Logged
'52 Kiekhaefer Mercury Rocket Hurricane KG4H
'70 750/RC 1000 Original Owner
'83 1100F

Offline Grumpol

  • Hot Shot
  • ***
  • Posts: 264
Re: cb750 k7 refitting engine
« Reply #2 on: October 22, 2008, 05:19:37 AM »
Quote from: tworiversuk on October 22, 2008, 02:39:03 AM
Hi all,
do I fit the swing arm first before fitting the engine back in the frame?
regards
Mike
All depends on how you are fitting the engine.
If your going to put the engine into the frame it doesnt matter, but if your going to put the frame over the engine it would be easier without the swingarm in place
Logged

Offline tworiversuk

  • Full Member
  • *
  • Posts: 46
  • cb750k7
Re: cb750 k7 refitting engine
« Reply #3 on: October 26, 2008, 07:07:45 AM »
well it's in , and know is all about fitting the bits, need to rebuild and restore the clocks along the way
Logged
Life's just a box of chocolates

Offline City Boy

  • Hot Shot
  • ***
  • Posts: 689
Re: cb750 k7 refitting engine
« Reply #4 on: October 26, 2008, 12:54:04 PM »
Hey,good lookin work area there tworiversuk.   Rock ON
Logged
'52 Kiekhaefer Mercury Rocket Hurricane KG4H
'70 750/RC 1000 Original Owner
'83 1100F
Pages: [1]   Go Up
« previous next »