Topic: Brake light removal

[Kalamazoo]

Alright so I'm taking my break light off, did a quick search but couldnt find anything.
I have a 1977 CB 550 and I'm wondering if the wires will just pull out from the light or if I need to cut them?
I'm pretty positive that on the blinkers they just pull out but I gave a little tug and it was pretty tight.
So cut, or pull?

[Really?]

Is there not a bullet connector somewhere under the seat or further down the line?

[Kalamazoo]

I looked and if I disconnect that because if would also disconnect a bunch of other wires it wouldn't be able to fit through the hole in the fender that it needs to go through. 

[mcuozzo]

I'm with Giga on this one.  I just did this on my 750, is the 550 really that different?

If you follow the three wires back down to the wiring harness, there should be a plastic shroud that houses three separate connectors.  I just undid each one (taking a picture and making note of which one goes where!) and slid them out of the hole in the fender one at a time.

Speaking of pictures, this one might help...of course someone may have spliced your harness differently!!!